Bayonet Blade On Rivets Powder Art 026
Hss, carbide cutting tools end mills, drill bits, taps, saws, screw dies, blades, reamers, inserts.
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
Cosmetics , charcoal, refined sunflower oil , bioderma, chocolat, sunflower oil, thermometer, health and beauty products , perfumes, nestle nido milk,nido milk, baby products, confectionery, hair care ,cream charger, fastgas 580g, skin care, wood pellets ,victoria secret , soft drinks , cosmetics , personal care , rapeseed oil, dior , filorga , la mer , la roche posay , hardwood charcoal, eggs,580g n2o cream charger , sunflower oil, canola oil,bbq charcoal,mosa cream charger, pine wood pellets , home cleaning , braun thermometer , charcoal, , pini kay briquette, , oral care products,shaving & hair removal products, rapeseed oil , detergents , hair care products ,a4 copy paper, l�???�??�?�¢??oreal ,moroccan oil , sk ii products , la prairie, givenchy ,vichy laboratoires , avene , anastasia beverly hills,victoria secret, lancome tonique confort 200ml.
A new ANG 01 aircraft has been designed and manufactured in 2019. ANG 01 is based on the concept of LA-50 aircraft, At the same time, ANG 01 is substantially more perfect than its predecessor. Thus, due the use of new carbon fiber materials, its weight was reduced and its strength characteristics were enhanced. Owing to the usage of specialized computer programs, the company specialists have managed to implement an optimum structure of the fuselage and wing, having achieved hereby their best performance. We have also used the advanced products for computer-based wind-tunnel simulation that allows modeling the characteristics of the airframe and fine-tuning them at the development phase. The development of the aircraft was performed, based on the latest technological achievements, with the use of the up-to-date CAD systems for aircraft design computing, which allowed to carry out the design strength aerodynamics testing, etc. with high precision directly in the computer. Due to the calculations solely in CAD systems, we have obtained the aircraft empty weight of 380-400 kg (maximum configuration), while the maximum take-off weight is of 950 kg. Thus, the payload is 550-570 kg, that is 137%-150% of its own weight. Besides, to enhance the safety of the aircraft, it was equipped with a modern parachute rescue system GRS 6 800-990 SDS manufactured by the Czech company Galaxy GRS s.r.o. Reliability and ease of control is provided by modern electronic SkyView HDX system manufactured by Dynon Avionics. Specifications Number of Seats 5 Engine Rotax 915 iS3A 141 HP fuel Type Avgas A-92, A-95, A-98, 100LL Propeller 3 blade, Variable Pitch Type Landing Gear trycicle type, hydraulically retractable Maximum Takeoff Weight 950 kg empty weight 380 kg The capacityof fuel tanks 245 l wing area 11,3 m2 Wingspan 9,6 m Aircraft Length 7,138 m Height 2,65 m fuselage width MAX 1,35 m cabin height 1,2 m Cabin length MAX 2.3 m Wing loading 84 kg/m2 Landing Gear Tread 1.9 m wheel size 8â?? (420 mm) Luggage Compartment Capacity 780 liters Maximum Lift-to-Drag Ratio 18.6 Max speed 360 km/h Maximum cruising speed 345 km/h Cruising speed 85% 310 km/h landing speed 70 km/h Cruising speed 65% 290 km/h rate of climb 3,5 m/s Takeoff Run 300 m Landing Roll 150 m at an altitude of 4000m Climb rate 8.3m / sec
Manufacturer of aluminum profile processing equipment, manufacturing and sales of broken aluminum doors and windows and plastic steel door and window processing equipment . To be satisfied with products, create a strong brand, internal plastic quality, and external image, with its high, precise, sophisticated and specialized operation mode, and good reputation, it has become a benchmark brand in the same industry at home and abroad. One of our hot products: High precision digital display double head aluminum profile extrusion cutting saw machine Main features: Main Features 1.Used for Aluminum profile high accurate Cutting 2.Imported Linear bearing system in moving and feeding device ensures the accurate the machine running and cutting, and stable performance. 3.Digital display system equipped can be easy readout the accurate cutting length and quantity automatically, ensures a high accurate re-load position and easy operation . 4.Pneumatic -hydraulic damp device ensured the saw blade stable feeding and working. 5.cutting angle change Automatic between 45° (outward)and 90°. 6.Imported carbide saw blade for a high quality cutting and long service life. 7.Automatic Safety system of shield can ensure the safe operation . 8.Spraying cooling system, make sure carbide saw blade long service life Main Technical Parameters Power supply: 380v 50Hz Weight: 1400Kg Motor power; 2*2.2KW Cutting width max: 135mm Motor rotary speed: 2800r/min Cutting angle: 90° and 45° (outward) Operation air pressure: 0.5~0.8Mpa Feeding speed 0~3m/min Saw blades length: 370~4200mm Saw blade specification: Φ500�Φ30�δ4.4mm Z=120 Air consumption: 60L/min Dimension: 5500mm�1750mm�1990mm Cutting height: 200mm�90°;190mm�45°
