Power hand toos tools, non power hand tools., welding inverter and mma., consumables, cutting and grinding disks, welding electrodes.
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch. LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output. The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate. A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω). MAIN FEATURES: Portable and lightweight Moistureproof and dustproof case Advanced LiFePO4 internal battery with fast charging option High-contrast graphic OLED display Multifrequency operation Operating frequencies can be changed upon request Internal transmission loop antenna Automatic load impedance matching Ability to work with energized 0.4kV cables (inductive connection) Overload protection Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
Solar panels.
Solar Mounting Structures.
Solar module.
Led street lights.
Led bulb plastic lamp.
Pv Mounting Systems For Utility Scale Solar Power Plants, Metal Structures For Photovoltaic Power Plants .
Eco friendly materials for home decoration such as bamboo flooring and bamboo carpets, office finishing materials and materials for industrial use , solar panels.
Gas cooker, electric cooker, gas oven, electric oven, table top cooker, gas stoves, electric stoves, gas hobs.
LED lighting, LED light, LED luminaires, LED for street, led lighting like industrial lighting, explosion-proof lighting, street lighting, searchlights, architectural lighting, special lighting for agricultural enterprises, phyto lighting, lighting control systems..Manufacturer & exporter
Flour.
Honey is the nectarous and saccharine exudations of plants (Honey Flora) gathered, modified and stored by the honey bee. Honey sold can be either of a single source or of a blend of floral honeys to give a required colour and flavour. The honey shall be clean, practically free from foreign matter including wax, comb and bee parts. The pure honey should be free of additives, noxious substances , fermentation and admixtures of any kind including sucrose and invert sugars. Odour: Pleasant , characteristic aroma. Free from foreign odours. Flavours: Pleasant sweet flavour, characteristic, sufficiently strong but not distinctive. Free from foreign or objectional flavours. Honey flavours will vary according to floral sources and harvest locations.
Our specialization is the production of various cookies: sugar, prolong, cracker, as well as one that you may not have seen before: with incredible combinations with marshmallows, marmalades, natural fillings made with the addition of pectin, agar-agar, natural egg whites, apple puree and dairy products. Can be sale in the packaging or on the weight.
Kiln Dried Sawn Wood, Structural Wood, Glued Laminated Beams, Clt Panel, Clt Modules, Wooden Pellets, Formwork Panels And Beams, Mdf/hdf, Parquet Flooring And Laminate, Furniture Components, Wall Cladding, Formwork Panels, Kvh, Blockhouse, Timber Beams H20, Sawn Timber.
Wooden and stone sculptures, handcrafts such as wooden bowels, wooden masks, ; wooden animals , bushman statures , wooden spoons, walking sticks, leather products such as hand bags, belts, wallets . wood normally used, light, wood and hard wood, such as teak, mahogany, black ebony, rose wood and also olive wood, chess boards. fabric bags of different types and sizes, cushion covers, african fabrics cushion covers, hand embroidery products, patch work, table clothes and table napkins or serviettes..
Confectionery.
