Our product can be used in food industry/industrial food makers/indusrtial kitchens/etc. We propose high quality product and competitive prices! We use an individual approach, therefore in each case we make a calculation of the cost of production. We are ready to make calculations, samples, and series of orders for you. Let`s improve youre business with us! We will be happy to answer on all your questions! For more information follow: https://alliancesteel.com.ua/en/ https://www.instagram.com/alliance.steel/
Luminaires are used for lightning of: Outdoor and indoor lightning facilities with emergency (reserve) lightning Housing of luminaires is made of aluminum alloy. ptics borosilicate glass or polycarbonate. Luminaires have anti-vandal protection. Different types of mounting allow to install luminaires without improvement of the existing mounting attachments.
Specifications: Model: GP-AWC01 Input: 9V/2A 9V/2.7A or 12V/2A Output: 15W/10W/7.5W/5W (Phone) 2.5W (Apple Watch SI, S2, S3, S4, S6) 5.0W (Phone orTWS Earphone: Apple AirPods 2, Pro; Input Interface: Type-C port Transmission Distance (Phone):
Port C C1/2 output: 5V3A, 9V3A ,12V3A, 15V/3A, 20V3.25A A output: 5V3A, 9V2A , 12V1.5A Type C1: 5V3A, 9V3A ,12V3A, 15V/3A, 20V2.25A Type C2/A: 5V3A, 9V2A ,12V1.5A (C2/A Share 5V3.6A) Watt 65W
PD 22.5W(compatible with QC3.0)Type-C bidirectional fast charging Capacity: 30000 mah Size: 142 66 39 mm Material: ABS+ aluminum alloy Micro input : 5V2A 9V2A 12V1. 5A ;Type - C input: 5V3A 9V2A 12V1. 5A ; Type - C output : 5 V/3A 9V2A 12V1. 6A ; USB OUTPUT: 4. 5V5A 5V3A 9V2A 12V1 5A Color: retro green, cool black, red, royal blue
The insulators testing device HVTS-HP is designed for testing the insulation of power cables and solid dielectric with the rectified voltage of up to 100 kV, as well as testing solid dielectrics with the sinusoidal voltage of up to 100 kV, 50 Hz. The main difference between series devices Cable test and diagnosis system HVTS-HP devices from Portable Hi pot Tester HVTS-70/50 is the increased power output. There are two standard versions: 7.5 KVA and 17.5 KVA.
SWG-12 Mobile Cable Test and Fault Location System - is a complex solution for safe, fast and easy locating a faulty place on low and medium underground voltage cables. It includes a powerful high-voltage unit, which has a test, burn and surge generation modules, and a time-domain reflectometer for locating faults on cables. Main features: - Suitable for portable application - Easy to operate - Multiple fault location methods included - 10.4 High-contrast color TDR display - Improved convenience for operator - Heavy duty The high-voltage unit of the system provides with high-power up to 1100 Joules surges at 3; 6 and 12 kV ranges. At each range, the output voltage is smoothly adjustable. The rate of surge waves can be smoothly adjusted. The single manual shot option is also included. The DC output mode is provided for quick fault diagnostics. The 100 mA burn mode is available. Digital Impulse Reflectometer (TDR) provides you with 10.4-inch bright high-contrast TFT display with touchscreen. The 800 Ã? 600 pixels resolution makes the picture sharp. The touchscreen allows an operator navigate through the menu fast and easy. An alternative way of navigation is included. It is provided with a control knob. Reflectometer RIF-9 integrates a multiple ways of fault prelocation. It can be used either as a standalone device in TDR mode or in a conjunction with HVmodule, working in arc reflection mode. Reflectometer RIF-9 has USB interface. The package content includes software for PC (optional), which allows working with saved reflectograms. The firmware can be easily updated through USB interface by inserting a flash drive.
VLF-60 Cable Insulation Tester by KEP is a very low frequency high potential tester that ensures efficient testing and fault location on medium voltage cables. Testing principle Very low frequency (VLF) testing involves applying frequency in the range of 0.01 to 0.1 Hz to the cable under test, which is non-destructive to insulation of proper quality, but is enough to detect cable faults. Compared to DC cable testing, which can be damaging to good insulation, VLF testing does not have such a detrimental effect on the cable being tested and does not generate any travelling waves. Main features Efficient non-destructive cable withstand testing Portable, perfect for field testing Fully automatic testing cycle Automatic discharging Easy maintenance due to solid-type insulation system Breakdown voltage measurement and load recognition Easy-to-use software Does not need an external PC LCD touch screen
Luminaires are used for lighting of: Premises with high safety standards Production and storage premises Mining and refining plants Rail depot Technological transport Luminaires are produced in basic modifications with power varied from 40 to 204 W. Housing of luminaires is made of alluminium. Spreader and optics polycarbonate. Luminaires are anti-vandal. Different types of mounting allow to install luminaires without improvement of the existing mounting attachments.
Luminaires are used for lighting of: ï?² Premises and areas with high explosion hazard (Fuel refiners and storage, gas stations) Luminaires are produced in basic modifications with power varied from 15 to 225 W. Housing of luminaires is made of aluminium or rough-service polycarbonate. Spreader polycarbonate. Luminaires have anti-vandal protection. Voltcontrol system can be installed into luminaires.
LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch. LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output. The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate. A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω). MAIN FEATURES: Portable and lightweight Moistureproof and dustproof case Advanced LiFePO4 internal battery with fast charging option High-contrast graphic OLED display Multifrequency operation Operating frequencies can be changed upon request Internal transmission loop antenna Automatic load impedance matching Ability to work with energized 0.4kV cables (inductive connection) Overload protection Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
Automatic circuit breaker tester UPA-3 is designed for testing and ampere-second characterization of automatic AC current circuit breakers. The device allows registering the value of the supplied current and timing the automatic circuit breaker switching interval. Circuit breaker tester UPA-3 is a mobile device, which could be easily transported to a required testing location. Circuit breaker tester UPA-3 operates on the principle of varying the power in the primary circuit of the matching power transformer and, respectively, varying the output current, flowing through the automatic circuit breaker under the test. Power regulation could be done either through an external regulator (RNO or VR) or through a built-in thyristor controller.
"The stylish floor lamp of the directed light will provide illumination for any space, big or small. They are easy to move, so you can make any place a little more comfortable. This modern floor lamp will complement and decorate any interior"
Electro motor power from 90 w to 180 w, single-phase, capacitor. The power from 90 to 180 kw, operating voltage 220 v, motor connecting points (shaft outlet, shaft configuration, motor mounting holes) are determined individually with the customer. Also we can complete the engine with a thermal relay. The minimum . The minimum lot for delivery is from 100pcs up to 500pcs.
Flexible WC connector reinforced. Lenght: 330/558/830 mm.
Own production, capacity up to 50kg/h, is mainly designed for processing hard vegetables and fruits.Voltage is 220V, the number of revolutions to 3000 rpm.
Generator set for factories and enterprises with the need for autonomous power supply of more than 2000 kWt. (Gas piston unit of container design, power over 2.5 MW) Model: MTU 20V4000 GS Fuel: natural gas Manufacturer: "mtu A Rolls-Royce solution" Working principle: piston engine Condition: new Detailed specifications will be sent as a PDF file in messengers or by e-mail. In the presence of 5 pcs., geographically located in Turkey, ready to provide fast delivery to any city
LED lamp 'Round Fixture MG FLASH URBAN', model 'M-UR-400-30', white frame with dimensions 400 x 80 mm, 30W, luminous flux 3600 lumens, color temperature 4000 K, LED OSRAM
LED lamp 'Linear Lamp MG LINE', model 'M-LN-1000-40', white frame with dimensions 1000 x 67 x 80 mm, 40W, luminous flux 5400 lumens, color temperature 4000 K, LED OSRAM
The sensor temperature measuring of the steel equipment or axle bearing is designed to measure the temperature of axle boxes with the transferring data to wagon controller. The temperature sensor is attached directly to the axle box cover with a bolted connection. The power element of the temperature measuring sensor is a built -in battery. Fastening type bolted joint; Range of working temperatures 40 + 85 C Range of measured temperatures 40 + 125 Accuracy of temperature measurement 0.5 Frequency plan EU433 ; The period of communication is adjusted; Type of antenna built-in ; Sensitivity -114 dBm ; Radio communication range in the tunnel up to 100 m ; Transmitter output power up to 20 mW ; Built-in battery capacity 2700 mAh ; Continuous battery life p to 2 years ; Dimensions, mm not more than 119 x 32 x 32 ; Weight, g, not more than 300 ; Total service life, years, not less than 10 ; The operating mode is long ; Dust and water protection rating IP65.
