We offer Royal Kraft RK9500W gnerators, 3-phase, 3,5kW. Technical data: Power supply: 230V/50Hz 3 phases Engine: 4-stroke with air cooling 3x sockets 230V 1x12V 1x400V Engine power: 5.2kW/7km Nominal power: 3.5kW Maximum power: 3.8kW Voltage regulator: Yes Start: manual Voltmeter: Yes Fuel level sensor: yes 12V output: yes Fuel tank capacity: 15 l (approximately 12 hours per tank) Fuel: 95 or 98 unleaded gasoline Materials: stainless steel, copper, aluminum, plastic The generator is equipped with shock absorbers. Weight: 39 kg
The insulators testing device HVTS-HP is designed for testing the insulation of power cables and solid dielectric with the rectified voltage of up to 100 kV, as well as testing solid dielectrics with the sinusoidal voltage of up to 100 kV, 50 Hz. The main difference between series devices Cable test and diagnosis system HVTS-HP devices from Portable Hi pot Tester HVTS-70/50 is the increased power output. There are two standard versions: 7.5 KVA and 17.5 KVA.
SWG-12 Mobile Cable Test and Fault Location System - is a complex solution for safe, fast and easy locating a faulty place on low and medium underground voltage cables. It includes a powerful high-voltage unit, which has a test, burn and surge generation modules, and a time-domain reflectometer for locating faults on cables. Main features: - Suitable for portable application - Easy to operate - Multiple fault location methods included - 10.4 High-contrast color TDR display - Improved convenience for operator - Heavy duty The high-voltage unit of the system provides with high-power up to 1100 Joules surges at 3; 6 and 12 kV ranges. At each range, the output voltage is smoothly adjustable. The rate of surge waves can be smoothly adjusted. The single manual shot option is also included. The DC output mode is provided for quick fault diagnostics. The 100 mA burn mode is available. Digital Impulse Reflectometer (TDR) provides you with 10.4-inch bright high-contrast TFT display with touchscreen. The 800 Ã? 600 pixels resolution makes the picture sharp. The touchscreen allows an operator navigate through the menu fast and easy. An alternative way of navigation is included. It is provided with a control knob. Reflectometer RIF-9 integrates a multiple ways of fault prelocation. It can be used either as a standalone device in TDR mode or in a conjunction with HVmodule, working in arc reflection mode. Reflectometer RIF-9 has USB interface. The package content includes software for PC (optional), which allows working with saved reflectograms. The firmware can be easily updated through USB interface by inserting a flash drive.
VLF-60 Cable Insulation Tester by KEP is a very low frequency high potential tester that ensures efficient testing and fault location on medium voltage cables. Testing principle Very low frequency (VLF) testing involves applying frequency in the range of 0.01 to 0.1 Hz to the cable under test, which is non-destructive to insulation of proper quality, but is enough to detect cable faults. Compared to DC cable testing, which can be damaging to good insulation, VLF testing does not have such a detrimental effect on the cable being tested and does not generate any travelling waves. Main features Efficient non-destructive cable withstand testing Portable, perfect for field testing Fully automatic testing cycle Automatic discharging Easy maintenance due to solid-type insulation system Breakdown voltage measurement and load recognition Easy-to-use software Does not need an external PC LCD touch screen
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Our company is a reliable supplier of cable and wire products, our specialists will always help you choose a cable or wire of good, namely the best quality, we work with the most famous and high-quality brands of Ukraine and not only, our company is ready to supply you following listed copper and aluminum cable, as: I. Power cables: NYY; NAYY; NYBY/NYRY; NAYBY/NAYRY; N2XY; N2XH; 2XBY/N2XRY; NA2XBY/NA2XRY; NA2XY. II. Building wire: NYM. III. Flexible cables: H05V-K; H07V-U; H07V-K; H05Z-K; H07Z-K; H07Z-U; H07Z-R; H03VV-F/H05VV-F; H03VH-H; H07RN-F; H01N2-D. IV. Control cables: NYY control cables; YSLY. V. Fire resistant power cable: (N)HXH-J FE180/E30; (N)HXH-J FE180/E90. VI. Bare copper strand: Bare copper strand VII. Overhead line: AsXSn Any volume, certified documentation, product labeling, correct packaging, we can do all this, we are waiting for your applications and look forward to long-term cooperation.
«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Hydraulic turbines.
Steam turbines.
- Automatic and power control relays - Time relays - Relays and protector and alarms of single-phase circuits on ground in circuits 6-10 kV - Relay protection and automatics - Phase control relays, isolation and pulsation - Electromagnetic relays.
Gas turbines.
"The stylish floor lamp of the directed light will provide illumination for any space, big or small. They are easy to move, so you can make any place a little more comfortable. This modern floor lamp will complement and decorate any interior"
Electro motor power from 90 w to 180 w, single-phase, capacitor. The power from 90 to 180 kw, operating voltage 220 v, motor connecting points (shaft outlet, shaft configuration, motor mounting holes) are determined individually with the customer. Also we can complete the engine with a thermal relay. The minimum . The minimum lot for delivery is from 100pcs up to 500pcs.
Heating area - up to 3 sq.m. Weight - 3 kg Dimensions - 750mm x 130mm x 14mm Power consumption - 157 Watt Manufacturer Warranty - 5 years Electric skirting panels warm up walls and help eliminate mold, fungus, moisture, and condensate in rooms that usually have cold corners or cold external walls. Heating such a room with an ordinary oil-filled radiator, electric water boiler, or electric fan heater will not solve the problem. Three different models of UDEN-S skirting panel heaters range between 100W, 150W, and 200W in power capacity. They can be used not only as a stand-alone heating system but also combined with other UDEN-S heaters for efficient heating and a comfortable feeling in the room. Beautifully designed, our skirting panel heaters are only 13cm in height and only 14 mm in thickness. They come in white color as standard but a customer can order any color from our rich palette (over 100 colors and shades) that will match the customer's interior.
Heating area - up to 4 sq.m. Weight - 3.5 kg Dimensions - 998mm x 130mm x 14mm Power consumption - 200 Watt Manufacturer Warranty - 5 years Electric skirting panels warm up walls and help eliminate mold, fungus, moisture and condensate in rooms that usually have cold corners or cold external walls. Heating such a room with an ordinary oil filled radiator, electric water boiler, or electric fan heater will not solve the problem. Three different models of UDEN-S skirting panel heaters range between 100W, 150W, and 200W in power capacity. They can be used not only as a stand-alone heating system but also combined with other UDEN-S heaters for efficient heating and comfortable feeling in the room. Beautifully designed, our skirting panel heaters are only 13cm in height and only 14 mm in thickness. They come in white colour as standard but a customer can order any colour from our rich palette (over 100 colours and shades) that will match the customer's interior.
USB Cable Gelius Pro Unimog2 is an excellent choice for recharging your devices and transferring data between them. It is perfect for your Android gadgets and tablets. The convenient 1 meter length is guaranteed to connect devices anywhere - at home, at work or in the car. Combining outputs for USB, USB-C and Micro-USB ports, this cable will definitely come in handy for all modern devices. In fact, its unique design allows you to choose the right plug specifically for your gadget. The cable itself is made of high quality, non-toxic materials for the environment and has a nylon braid, which increases its resistance to external damage, bends and refraction, and also resists tangling. The connectors are made of aluminum alloy and are highly conductive and resistant to corrosion and damage. There is a special seal made of thermoplastic elastomer between the plug and the winding, which will prevent cable breaks and kinks.
1 .Connector: lightning 2 .Function: Charge +Sync 3.length: 1,2 M 4 .Max Output:2.4A 5 . Color:Yellow connector+Blue cable 6 .Material:liquid soft glue line+ feel very soft
Luminaires are used for lightning of: Outdoor and indoor lightning facilities with emergency (reserve) lightning Housing of luminaires is made of aluminum alloy. ptics borosilicate glass or polycarbonate. Luminaires have anti-vandal protection. Different types of mounting allow to install luminaires without improvement of the existing mounting attachments.
