Air Freshener Car&Home Ecco Cosmetic designed to remove unpleasant odors and generate light aromas to living quarters, kitchens, bathrooms and toilets, car interiors etc., without leaving marks on upholstery, fabric, furniture. The air freshener has a unique premium perfume scent.
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names.
Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400
Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol.
D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).
Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.
The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:
L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);
- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%
REBCO (Russian Export Blend Crude Oil) is a sort of Russian Export Crude Oil with a mixture formed in the system of pipeline Transneft by mixing heavy sour crude Ural from the Volga region and low-sulfur oil in Western Siberia, the relevant characteristics to the brand Urals.
Urals brand oil is supplied through the Baku-Novorossiysk pipeline system and the Druzhba pipeline.
Components of petroleum are separated using a technique called fractional distillation, i.e. separation of a liquid mixture into fractions differing in boiling point by means of distillation, typically using a fractionating column.
Petroleum includes not only crude oil, but all liquid, gaseous and solid hydrocarbons.
Our company exports to contries such as Malasia, Singapore, China, Taiwan and all countries in Europe and parts of Africa
We'll be glad to have a deal with you.
aluminum ingot is a large block of refined, molten aluminum cast into a mold, serving as a primary raw material for manufacturing various aluminum products like sheets, cans, auto parts, and construction materials. Produced from purified alumina via electrolysis, these ingots vary in size and type, from high-purity forms for specialty uses to alloy ingots for general industry, and are crucial for light weighting in automotive and aerospace sectors
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99.
GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock.
For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels:
- "Very Low Sulphur" is mazut with a sulphur content of 0.5%
- "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0%
- "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0%
- "High Sulphur" is a mazut with a sulphur content of 2.0-3.5%
- Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
We export to Europe the following range of products: black and white mustard seeds, buckwheat and confectionery sunflower (seeds)
We make delivery by our cars in bulk or packed the cargo in liner bags.
We export to Europe the following range of products: black and white mustard seeds, buckwheat and confectionery sunflower (seeds)
We make delivery by our cars in bulk or packed the cargo in liner bags.
Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but consists of several thousands of hydrocarbon compounds in which the elements carbon and hydrogen are present in all molecules and, in part, are bound to other elements.
The hydrocarbons can be divided into three main groups: paraffinic, naphthenic and aromatic. Paraffinic hydrocarbons can be further divided into two subgroups: normal paraffinic and iso- paraffinic.
Paraffinic hydrocarbons are the best lubricants. The distillation process in the refinery separates the hydrocarbons contained in the crude into cuts based on the molecule size.
Furthermore, as many unwanted substances as possible are removed in the process, such as sulphur, aromatic hydrocarbons, paraffin wax, etc. In other words the mineral oil production process is physical cleaning and the end product is so-called paraffinic base oil.
Most of the hydrocarbons in the base oil are paraffinic, but it also contains naphthenic and aromatic molecules. When the finished lubricant, such as motor oil, is made of these, several additive compounds are used to improve the base oil properties.
The final outcome can also be so-called naphthenic base oil, where most of the hydrocarbons are naphthenic. Their cold properties are excellent.
Trailed cultivators
Designed for continuous pre-sowing cultivation of the soil with simultaneous cutting of the root system of weeds, grinding, leveling (rolling) the surface of the field, as well as for the care of couples. Cultivators have a powerful frame design, successful placement of working bodies in rows, which allows processing the surface layer of the soil without clogging with plant debris. Cultivators in the process of execution of the process create a uniform pre-sowing bed. The depth of tillage is set by the depth adjustment mechanism and the hydraulic cylinders of the cultivator's lifting-lowering.
Combine trailed fodder
mows and picks up dried seeded and natural herbs from rolls, mows maize and other high-stem crops with their simultaneous grinding and loading of crushed mass into vehicles, which is used for direct feeding to cattle or making haylage, granulated and briquetted fodder, grass flour and silage.
Limpidity- Limpid without lees
Smell, Taste- The taste of the depersonalized oil odour less
Color value, amount of iodine mg, Max : 3.0
Acid value mg KOH/g, Max: 0.2
Weight part of non oleaginous impurities, Max: No
Peroxide value, ½ mmol/kg, max: 1.0
Weight part of Phosphorus compound max: In terms of stearooleocytin, % No, in terms of P20, % : No
Weight part of moisture and impurities, %, Max: 0.1
Food and energy value per 100 g of product:
Carbohydrates g : 0.0
Fats g: 99.9
Energy Value, Kcal: 899,0
