Vacuum coating, pump.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99. GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: - "Very Low Sulphur" is mazut with a sulphur content of 0.5% - "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0% - "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0% - "High Sulphur" is a mazut with a sulphur content of 2.0-3.5% - Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
Rumex confertus, radices High quality horse dock root, herb for wholesale Dishes made from horse sorrel leaves are very popular. Not fresh leaves are used, but dried ones - during drying, fermentation occurs, and they acquire a pleasant taste, and the characteristic bitterness disappears. Extract from the roots and rhizomes gives a yellow dye; leaves and stems give a green dye. The rhizome can be used to tan leather. In veterinary medicine, the roots are used for intestinal and skin diseases. The roots are used in the tanning industry and as a dye. All parts of the plant are used for medicinal purposes, separately - leaves with petioles, fruits in panicles, root (lat. Radix Rumicis conferti) We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine
Anethum graveolens, semen High quality dill seeds for wholesale. Dill seeds are the fruits of this herb, which taste like caraway seeds. The product has a rich chemical composition: vitamins B, vitamin C, A, potassium, calcium, phosphorus, magnesium, iron, copper, manganese, polyunsaturated acids. Is used in medicine and culinary. We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine
Taraxacum officinale, radices High quality dried organic or conventional Common dandelion root for wholesale Dandelion leaves, flowers, and roots are all edible. Dandelion roots are rich in inulin (up to 40% in autumn), sugars (up to 18% in autumn): fructose, sucrose, galactose. All parts of the dandelion can be used in cosmetology: stems, leaves, petals and roots.And of course is used in medicine. We provide drying of our products meeting all requirements to keep max of useful substances Country of origin - Ukraine
Rubus idaeus, folia High quality raspberry leaf for wholesale.Raspberry leaves are a well of vitamins and other useful substances. Their number is even difficult to count. Yes, raspberry leaves contain vitamins A, B, C, K, E, PP, acids (salicylic, folic), trace elements (potassium, manganese, cobalt, copper, iron, zinc, phosphorus, molybdenum, iodine, magnesium), carbohydrates , fiber, flavonoids, mineral salts, polysaccharides, tannins, as well as essential oils. Raspberry leaves can be used in cosmetology, medicine and for making tea. We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine
Taraxacum officinale, folia High quality dried organic or conventional Common dandelion leaf for wholesale Dandelion leaves, flowers, and roots are all edible. Dandelion leaves are rich in phosphorus, calcium and iron, contain many proteins, which increases their nutritional value. All parts of the dandelion can be used in cosmetology: stems, leaves, petals and roots.And of course is used in medicine. We provide drying of our products meeting all requirements to keep max of useful substances Country of origin - Ukraine
Wild black elderberry from the Odessa region of Ukraine with the maximum amount of useful substances in comparison with other regions and organized cultivation. Elderberries contain vitamins C and E, carotene, essential oils, glucose and fructose, tannins, salibutsin, chrysanthemum, various amino acids. Black elderberry are widely used in pharmaceuticals to create drugs for the treatment of diabetes mellitus, hepatitis, gastric and duodenal ulcers. In food industry black elderberry is for pies, jellies, jams, ice cream, yogurt and alcoholic beverages. In folk medicine it has been used for centuries as a medicinal plant because anthocyanins are known phytochemicals that are good for human health. Elderberry harvesting season usually lasts from mid-August to mid-September, depending on the region and variety. The harvesting climate in the south of Ukraine preserves all the useful properties of elderberries Elderberries are harvested fully ripe. Drying takes place on modern drying equipment under the supervision of specialists with the maximum heating temperature of 50 C. Next, elderberries are triple-cleaned. We offer black elderberries in two forms: whole berry and crushed into powder. The price may vary depending on the volume and season. We will provide any additional information upon your request. Fito-Export, medicinal plant supply partner for your business. Contact: Sergey Chekhovsky * Wild plants * Quality 99.9% purity * Max amount of green as low as 0.1% * Purification method: color-sorting machine * Max drying temperature 50 C * Humidity 10% - 12% * Packaging weight 25 kg OR on request * Production capacity 50 tons per season * High nutrient content from the south of Ukraine
Rosehips (lat. Rosa Canina) are especially rich in vitamin C, it gives a boost of immunity and increases the body's resistance to viruses and infections. It is a powerful bactericidal, anti-inflammatory and phytoncidal agent. Season of picking is from September to November. White-flowered and red-flowered species of wild rose, which we collect in the Odessa region of Ukraine, are one of the record holders for the content of vitamin C. Rosehips are also contain carotenoids, beta-carotene, lutein, zeaxanthin, andlycopene. Rosehip products help to strengthen immune system, improve skin, reduce arthritis pain. Workers carefully hand pick berries fully ripen. Raw material product is taken to our facility where it gets cleaned with water and dried in a temperature-controlled heating room. Then berries are cleaned of peduncles and twigs, leaves, defects and unripe berries. Each batch get tested and receives a quality certificate. * Wild plants * Max drying temperature 50 degrees C * Humidity (9% -10%). * Purification method: color-sorting machine * Packaging weight 25 kg OR on request * Production capacity from 100000 tons per season * High nutrient content from the south of Ukraine The price may vary depending on the volume and season. Ecologically clean Odessa region in Ukraine allows us to collect wild plants with a high content of nutrients. At your request, we will provide a photo and any information about a particular batch. Fito-Export, medicinal herbs supply partner for your business.
