Silicomanganese (Simn65%) size: 10-80 mm Quality indexes: Si 17.2%; Mn 65.3%; C 2.4%; P 0.35%; S 0.02% Lumps use: Ferrosilicomanganese MnS17P35 for the metallurgical industry. Ferrosilicomanganese MnS17P35 is a brittle alloy of iron, silicon and manganese, which is widely used in the metallurgical industry to deoxidize steel. Ferrosilicomanganese gives the alloy shock resistance and brittleness in bending. Quantity available per month: 300t Packing: big bags
Rice husk ash is used in the production of special high-quality steel with low thermal conductivity and density. ZRSH is added to the heat-insulating mixture to cover the mirror of the metallurgical ladle, which additionally ensures compliance with the temperature regime of continuous casting processes. Ash is used as a filler in polymers and rubbers for the production of car tires, as an adsorbent for heavy metals for wastewater treatment. In the pharmaceutical industry, ash is added to stabilize emulsions, as an agent, thickener and suspending gel in the preparation of semi-solid products, in perfumery, RHA is added as a filler for toothpastes and creams. Equally important is the use of rice husk ash as a natural source of high performance amorphous silica.
Oil and gas industry: Accelerating the process and improving the efficiency of well drilling; increasing the life of drilling equipment; drilling fluids and plug cements of low density and high strength. Construction: ultralight and ultra-lightweight concrete; high-strength and low-density thermal and acoustic insulation boards; increased adhesion of concrete or brick walls, excellent leveler. dry mortars, lime and liquid mortars, cements, plaster, insulating roof coatings and soundproofing materials - lightweight, smooth surface, low cost, heat resistant, shrinkage resistant. sensitizer for the use of emulsion BBs. paints - resistance to chemical corrosion and light, thermal insulation, smoothness. Styrofoam: Aircraft, spacecraft, ship construction - low density and moisture absorption, high mechanical properties of materials for vibration damping, insulation and thermal protection. Ceramics: Refractory materials and coatings, insulation materials. Plastics Epoxy resins: production of polyethylene - improving strength and abrasion resistance. production of bearings, cameras, furniture and its accessories - tensile strength, impact strength, hardness, resistance to heat and light. Profiled materials, pipes, plates - dimensional stability, rigidity, heat resistance; TV housings, auto parts - compressive strength, bending elasticity, shrinkage reduction.
Rutile, ilmenite, zircon, kyanite sillimanite, kaolin.
Metal sludge, slag, zinc dross, zinc skimming, zinc ash, dust..Exporter and importer
Cenospheres, microspheres, fly ash, slag.
Agrotrading products like sunflower oil, rape oil, corn, wheat, building materials like fly ash, lime.
Urea 46%, aluminium ingots (al 87, al91, ak5m2), salt, chrome concentrate.
Kaolin, Zircon Sand/Silicate, Rutile, Ilmenite, Kyanite, Airon Oxide.
Zinc oxide, zircon flour, sand, micronized zirconium silicate, rutile, leucoxene.
Ferrosilicon FS10 Lumps dimentions: 0-800 mm Quality indexes: Fe (75-88), Si (8-12.5), Al (0.5-2.0), C(0.4-2.0), Ti(0.3-3.5), S(0.08-0.25), Cu(0.03); Lumps use: Ferrosilicon FS10 for the foundry and engineering industry. Ferrosilicon FS10 is a ferroalloy, the main components of which are metals such as iron and silicon. Ferrosilicon is used as a deoxidizing and alloying additives for the smelting of electrotechnical, spring, corrosion and heat-resistant steels. Quantity available : 2500t Packing: big bags
Graphite, flake graphite, natural flake graphite, expandable graphite.
Natural flake graphite.
Ferromanganese HC size: 10-80 mm Quality indexes: Mn 75-82%; C 7%; Si 1%; P 0.2%; S 0.02% Lumps use: Ferromanganese HC for the metallurgical and foundry industry. Ferromanganese HC its a manganese and iron alloy, which is widely used for deoxidation and alloying of steel in the metallurgical and foundry industries. Ferromanganese HC increases hardness of the steel, anti-corrosion properties and rupture resistance. Quantity available per month: 250t Packing: big bags
Fly ash is used: In the production of lightweight concrete. Low-cement concrete is used in the preparation of road bases. Fly ash is also used in slag-silicate concretes, which are used to repair roads, airfields, bridges, as well as in the construction of acid-resistant floors in chemical plants, livestock farms, and metallurgical facilities. In the production of foam concrete, its introduction into the foam concrete mixture increases the aggregate stability of the mixture between the beginning and end of the cement dough setting, which prevents the movement of components and prevents negative effects on the formation of the structure. Fly ash easily replaces cement in the production of mortars, ready-mixed concrete, and finished products. It is used as an additive to cement without reducing its activity, is used in the preparation of concrete for road construction, and as an additive to clay in the manufacture of tiles and bricks. As a component of dry construction mixes: production of dry masonry mixes consisting of cement, sand, fly ash, ICP, and powdered superplasticizer.
As a dense and hard material, dolomite is widely in demand in construction - in finishing works and for the construction of low-rise buildings. Also, the mineral is an important element of the refractory treatment of blast furnaces for steel processing and is used as a flux for melting iron materials. In addition to the above, dolomite: used as raw material for ceramics, glass, cement, fertilizers; used in the production of pesticides, paints; is the basis for creating decorative and building stones; acts as a filler in the production of asphalt, concrete blocks, etc. A large amount of powdered dolomite (dolomite flour) is actively used in the creation of float glass. Limestone material is also added to the soil to reduce acidity and "sweeten" the land. This special material plays an important role in a variety of components used to manufacture residential and commercial construction products: plasters (including waterproof); mastics; roofing systems; construction connections; marble and polymers; concrete blocks; floor coverings - composite vinyl tiles, etc.
Various, Rheological control, Flow agent, Anti-caking agent, Anti- blocking agent, Anti-settling agent, Spray aid, Thickening agent, Carrier, Viscosity control agent, Glossing or matting agent, Chemical intermediate, Stabilization agent, Filler, Reinforcing agent in: Coatings, Adhesives and/or sealants, Silicone elastomer, Rubber products, Suspension, Dispersion, Batteries, Cosmetics, Inks and toners, Paints, Hygiene and sanitary products.
Bentonite cat litter.
Microsphere, basalt, nanotubes, fly ash..
We offer liquid organic and mineral-organic fertilizers depending on your needs. Intended for soil nutrition and sub-root, extra-root feeding of cereals, legumes, all fruit and vegetable crops, trees, plants, flowers throughout their entire development cycle. The main advantages of use: - 1 ton of biofertilizers is enough for 50 ha; - The content of humic acids in biofertilizers in dry matter ranges from 13% to 28%; - Acceleration of plant growth and development, shortening of the growing season, earlier ripening by 8-10 days; - Increase in the yield of agricultural crops by 20 - 40%; - Increasing the resistance of plants to adverse environmental conditions: drought, high and low temperatures, toxic substances such as pesticides, herbicides, heavy metals. Composition of biofertilizers: Total nitrogen - 5.57%, incl. ammonium nitrogen - 0.8%; Phosphorus - 2.57% ; Potassium - 6.9% ; Copper - 3.2 mg/l ; Zinc - 3.63 mg/l ; Manganese - 6.6 mg/l; Cobalt - 0.03 mg/l ; Iron - 20.66 mg/l. The cost of mineral biofertilizers depends on the composition and volume of fertilizers. Each batch has a Certificate of Conformity.
