Iron scrap, stainless steel scrap.
Copper, steel plates, steel wire, copper scrap.Shipping and logistics
Titanium sheets plates Titanium rolled sheets 0.5 to 70mm thickness
Sugar, wheat flour, milling wheat, corn oil, sunflower oil, frozen chicken, date, sesame seeds, cement, iron, copper, plastic.
«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Kaolin, Zircon Sand/Silicate, Rutile, Ilmenite, Kyanite, Airon Oxide.
Titanium ingot Electron-beam single melted Surface machined Ti6al-4v dia 370-400mm Grade-2 dia 600-800mm
Titanium bars Titanium hot-rolled bars Titanium forged bars
Titanium slab Titanium slabs grade-2, vt1-0
Titanium wire Grade 2 Vt-20 2v
Titanium ingots, titanium slabs, titanium bars, titanium plates, sheets, titanium seamless tubes and wire, titanium tanks.
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
The Gelius Pro GP-CH013 Magnetic Car Phone Mount is fully adjustable for optimal 360-degree viewing conditions. The easy installation process allows the driver to securely and safely attach the mount to the dashboard or windshield. With a thin metal plate (included) between the device and the case, simply place your phone on the circular magnetic mount. The durable suction cup and soft foam padding keep your device safe even on the most rugged terrain. IMPORTANT NOTE. Thick phone cases may interfere with the magnetic attachment of this product. The supplied metal plate may not work properly with curved back devices. For Qi-enabled phones, the supplied small round plate is recommended as the square plate may interfere with wireless charging. 3-IN-1 GRIPPING SYSTEM: Durable sticky rubber suction cup and two-stage lever provide a secure grip on the dashboard while a strong magnetic plate holds your phone in place. A versatile car mount that attaches almost any phone to your dashboard or windshield. 3-in-1 Grip System: Durable sticky rubber suction cup and two-stage arm provides a secure grip on the dashboard while a strong magnetic plate holds your phone in place. Powerful magnet holds your phone securely for a secure fit. Easy to Clean: Durable sticky rubber suction cup does not leave marks or marks on the dashboard. Adjustable View: Flexible aluminum arm and articulated hinge allow you to freely adjust your viewing angle. Supplied with two magnetic plates. You can use it between the case and your phone, or you can attach it directly to your phone. Thick phone cases may interfere with the magnetic attachment of this product. Supplied in bulk packaging (non-retail packaging) Extra Protection: The non-slip silicone pad serves as a protective layer between your phone and the car mount and prevents your phone from slipping and scratching.
Silicomanganese (Simn65%) size: 10-80 mm Quality indexes: Si 17.2%; Mn 65.3%; C 2.4%; P 0.35%; S 0.02% Lumps use: Ferrosilicomanganese MnS17P35 for the metallurgical industry. Ferrosilicomanganese MnS17P35 is a brittle alloy of iron, silicon and manganese, which is widely used in the metallurgical industry to deoxidize steel. Ferrosilicomanganese gives the alloy shock resistance and brittleness in bending. Quantity available per month: 300t Packing: big bags
Ferromanganese HC size: 10-80 mm Quality indexes: Mn 75-82%; C 7%; Si 1%; P 0.2%; S 0.02% Lumps use: Ferromanganese HC for the metallurgical and foundry industry. Ferromanganese HC its a manganese and iron alloy, which is widely used for deoxidation and alloying of steel in the metallurgical and foundry industries. Ferromanganese HC increases hardness of the steel, anti-corrosion properties and rupture resistance. Quantity available per month: 250t Packing: big bags
Ferrosilicon FS10 Lumps dimentions: 0-800 mm Quality indexes: Fe (75-88), Si (8-12.5), Al (0.5-2.0), C(0.4-2.0), Ti(0.3-3.5), S(0.08-0.25), Cu(0.03); Lumps use: Ferrosilicon FS10 for the foundry and engineering industry. Ferrosilicon FS10 is a ferroalloy, the main components of which are metals such as iron and silicon. Ferrosilicon is used as a deoxidizing and alloying additives for the smelting of electrotechnical, spring, corrosion and heat-resistant steels. Quantity available : 2500t Packing: big bags
Incaldu Multi-function Fitness Treadmills with Massage have proven to be the most reliable treadmill in the professional Gym Ind INCALCU--NA6 home-use motorized Fitness treadmill: 1. 30 pre-set user training programs. 2. Massage, sit up and other attached functions. 3. Handle bar pulse. 4. Back walking function. 5. Running plate can be folded and when be unfolded,it will lay down slowly by buffer. 6. Soft stop and record of the total runned distance. 7. Display: time, distance, calorie, pulse, program and speed. 8. Motor Power: 2.5 HP DC motor with PWM control system. 9. Speed: 0.8 -- 16 km/h. 10. Physical Dimention: 1800*750 mm 11. Running area: 1300*450 mm 12. Meas.: 1865 * 770 * 335 mm 13. Capacity: 110 kgs .
foldable flat treadmill household treadmills will always come equiped with the patented FlexDeck Shock Absorption foldable flat treadmill INCALCU--NA9A Fitness foldable motorized household treadmill: 1. 12 pre-set user training programs. 2. 7 blue backlight LCD display 3. Handle bar pulse. 4. MP3 Speaker function. 5. Running plate can be folded and when be unfolded, it will lay down slowly by buffer. 6. 8 direct keys for speed change and speed adjustable button on the handle bar. 7. Soft stop and record of the total runned distance. 8. Display: time, distance, calorie, pulse, program, speed and circuit qty. 9. Motor Power: 2.5 HP DC motor with PWM control system. 10. Speed: 1.0 -- 16 km/h. 11. Incline: 0% -- 15% 12. Physical Dimention: 1780*800 mm 13. Running belt: 1300*450 mm 14. Meas.: 1800 * 810 * 350 mm 15. Capacity: 110 kgs.
