«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Our company can sell - oak wood fresh boards, next size Width from 150mm to 700 mm. Thickness from 320mm to 550 mm. Length 2 meters + 0.5; 2.5 meters + 0.5; 3.0 meters + 0.5. Payment - for minimal consignment (one lot of products) Quantity from 100-150 m3 to 300 m3 per month.
- Voltage 6000V - Voltage 10000V - Voltage 6000/3000V - Voltage 6000/10000V - Voltage 6300, 6600V - Voltage 380.
- Automatic and power control relays - Time relays - Relays and protector and alarms of single-phase circuits on ground in circuits 6-10 kV - Relay protection and automatics - Phase control relays, isolation and pulsation - Electromagnetic relays.
Direct current motors.
Diesel generators, gas-diesel generators, marine diesels, gas-turbine engines, boilers, transformers, isolators, turbo generator, turbines, breaker, pump, compressor, lathe, relay, contactor, automatic circuit breaker, electromagnetic starter, motor, press.
Kiln Dried Sawn Wood, Structural Wood, Glued Laminated Beams, Clt Panel, Clt Modules, Wooden Pellets, Formwork Panels And Beams, Mdf/hdf, Parquet Flooring And Laminate, Furniture Components, Wall Cladding, Formwork Panels, Kvh, Blockhouse, Timber Beams H20, Sawn Timber.
Rust converter, paints.
Power hand toos tools, non power hand tools., welding inverter and mma., consumables, cutting and grinding disks, welding electrodes.
Board games with miniatures for children and adults.Transportation
Solar Mounting Structures.
Wood, wood pellets, wood industrial and domestic pallets, sunflower husk pallets, briquettes pini kay, nestro, pine boards, pine lumber.
Edge glued panels from europian and canadian oak, ash and beech, oak, ash and beech lumber.Production
Wooden furniture, panels, furniture .
Stained glass, glass painting, decorative glass panel, stained glass windows, glass wall art, stained glass panel, mirrors.Manufacturing
Sunflower oil, soybean oil, wheat-flour top grade and first grade, sunflower meal, soybean meal, wheat flour, oak wood boards.Supplier of food products from Ukraine and other countries
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Hydraulic turbines.