Our company is ready to supply you with Copper Cathode. We are authorized sellers of the copper cathode from the manufacturer directly. Specification: Cu Purity: 99.97% 99.99% Weight of each sheet: 125kgs +/- 1% Size/Dimensions: 914mm x 914mm x 12 mm (appr.) Net weight in each pallet: 2 MTs +/- 1% Minimum weight in each container: 20 MTs. approx. Gross weight of each container: 22.20 MTs. approx. Packing: In pallets banded by aluminum bands Origin: South Africa Payment Terms: DLC Price CIF: 8000$
copper cathode 6000 mt/ monthly - 20% LME, L/C payment terms 99,99% Purity origin China
Copper, steel plates, steel wire, copper scrap.Shipping and logistics
Copper cathode, aluminium, crude sunflower oil, refined sunflower oil, rapeseed oil, sugar, equipment.International trading, buying and selling
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Iron scrap, stainless steel scrap.
Sugar, wheat flour, milling wheat, corn oil, sunflower oil, frozen chicken, date, sesame seeds, cement, iron, copper, plastic.
Sugarcane, beet sugar, wheat flour cereals like corn, wheat, barley, soya beans, sunflower, rapeseed, soybean, blco rebco crude oil, petroleum products like JP54, lng, JETA1, D2 D6, EN590, aluminum, cathode copper.
«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Sunflower, soybean, rapeseed cake (granulated/non granulated), sunflower, soybean, rapeseed meal (granulated/non-pelleted), sunflower, soybean, rapeseed oil, green peas, yellow/whole or halves corn/wheat, sunflower/soybean seeds, wood or sunflower husk pellets, alcohol (ethanol).
GFRP rebar with sand coating has better adhesion to concrete. It's available in rods d 4-32mm or in coils of 50-200m.
GFRP rebar with sand coating has better adhesion to concrete. It's available in rods d 4-32mm or in coils of 50-200m.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).