Cardboard rolls.
Compostable eco friendly bags and film.Shipping
High quality chicken Paws. Country of origin - Brazil. Certified products. Contact us for photos, videos and more information.
High quality chicken Feet. Country of origin - Brazil. Certified products. Contact us for photos, videos and more information.
High quality chicken Midwings . Country of origin - Brazil. Certified products. Contact us for photos, videos and more information.
Instant oat flakes, high quality,origin - Ukraine, packing 400 grams ( like in the photo), (container 40 feet - 41352 pack)
All types of rebars. Price after loi. For serious buyers! from 10000 mt/month. Standart rebar packing.
Titanium ingots, forged bars, rolled bars, sheets, plates, seamless tubes, wire.
Steel bars, wire rod, hot rolled coils, sheets, re-bars, rebar.Shipping
Chicken mid-joint wings 2*7.5 kg NON-GMO, High Quality, Origin and produced in Ukraine. There are top quality chicken paws and wings of Ukrainian manufacturer. Manufacturing and freezing according to all quality standards. All certificates and research results, along with photos, are available for each product. Price per MT, USD CIF (HP/HK/TH): Chicken mid-joint wings 2*7.5 kg (02-29-03/23-07-32)1810 $ CIF Payment terms: 30% of prepayment and 70% of payment in the term of 10 days before the ship enters the port of destination. Product specifications and photos in the attachment.
Chicken mid-joint wings small NON-GMO, High quality, Origin and produced in Ukraine. There are top quality chicken paws and wings of Ukrainian manufacturer. Manufacturing and freezing according to all quality standards. All certificates and research results, along with photos, are available for each product. Price per MT, USD CIF (HP/HK/TH): Chicken mid-joint wings 2*7.5 kg small (02-29-03/23-07-32) 1810$ CIF Payment terms: 30% of prepayment and 70% of payment in the term of 10 days before the ship enters the port of destination. Product specifications and photos in the attachment.
Chicken paws NON-GMO, High Quality, Origin and produced in Ukraine. There are top quality chicken paws and wings of Ukrainian manufacturer. Manufacturing and freezing according to all quality standards. All certificates and research results, along with photos, are available for each product. Price per MT, USD CIF (HP/HK/TH): Chicken paws 2*7.5 kg (02-29-03) 1210 $ CIF Payment terms: 30% of prepayment and 70% of payment in the term of 10 days before the ship enters the port of destination. Product specifications and photos in the attachment.
Chicken paws 15 kg bulk NON-GMO, High quality, Origin and produced in Ukraine. There are top quality chicken paws and wings of Ukrainian manufacturer. Manufacturing and freezing according to all quality standards. All certificates and research results, along with photos, are available for each product. Price per MT, USD CIF (HP/HK/TH): Chicken paws 15 kg bulk (23-07-32) 1210 $ CIF Payment terms: 30% of prepayment and 70% of payment in the term of 10 days before the ship enters the port of destination. Product specifications and photos in the attachment.
Medical Meltblown. Made in - Ukraine; Density - 25 gm2 Roll Width - 175mm Roll length - from 1000m BFE - 98-99% PFE - 98-99% It is possible to make a density of 25 to 50 gm2, a width of 50 to 1000 mm. Certificates of quality and compliance with European standards. Abifarm is a national Ukrainian manufacturer of nonwoven materials.
LLC Alex group offers to you agricultural products. 1) Grains (packing - 25 kg/55 pounds paper three-layer bag): - oat groats -0.53 euro / kg; -orn grits - 0.48 euro / kg; - millet groats - 0.64evr / kg; rolled oats - 0.65 euro / kg; - peas - 0.45 euro / kg. 2) Flakes: - Oat assortment (mix of 3-9 cereals) - 0.64 euro / kg; - pea flakes - 0.58 euro / kg; - buckwheat flakes - 1.69 euro / kg; - rye flakes - 0.53 euro / kg; - corn flakes - 0.62 euro / kg; - wheat flakes - 0.46 euro / kg. ltd.alexgroup1@gmail.com All products are certified and comply with all environmental standards.
Place of Origin: Xiamen,China Brand Name: OEM brand Model Number: Uzet-pipe-001 Plastic molds material:Steel P20.718HH, 2738 ,H13, 45#,C50 ect Shaping Mode: Plastic Injection Mold Product Material: Plastic Product: Household Product Precision: 0.005mm Design service: available Plastic Material: PP , PS, PET, PE ,ABS,ect Mould Base: LKM.HASCO,ect Cavity: Single/Multi Runner: Cold /Hot Surface treatment: machined finish Mold Life: 500000shots-1000000shots Design Software: UG ,Proe ,CAD/CAM,ect Lead Time: 25-30days Delivery Port: xiamen,China Packaging Details: wooden case + bubble bag cardbord box + bubble bag OEM Factory of Injection Plastic Mold Manufacturing from China Supplier Product Type Plastic injection mold(mould) Our Services Plastic mold design, plastic mold making, products sampling,plastic products produce,plastic injection molding, Material Aluminum,Brass,Stainless Steel,Copper,Plastic, Or as per the customersâ?? requirements Surface Treatment Anodizing,Sandblasting,Painting,Powder coating,Plating,Silk Printing,Brushing,Polishing,Laser Engraving Drawing Format .jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc Service Project To provide production design, production and technical service, mold development and processing, etc Testing Machine Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester and so on Packing Foam, Carton, Wooden boxes, or as per the customerâ??s requirements Payment Terms T/T,Western Union,Paypal,LC, DP,DA Certification SGS, ISO9001 FAQ 1. Q: What kind of products can you do? A:plastic mould, injection mold, Plastic injection molding , plastic parts mass production . 2. Q: What kind information is needed for quotation? A: 1) Sample photo with size or 2D/3D design 2) Product material 3) The quantity 4) Runner type: cold or hot 5) Mould steel type, P20, 718, 2738, H13, S136, 2316 etc. 3. Q: I have no 3D drawing, how should I start the new project? A: Sample is needed OR your ideas,then we could help to finish the 3D drawing. 4. Q: How long will it take for finishing injection mold? A: Usually it will take around one month to finish plastic injectioin mold. 5. Q: How about the samples? A: Some plastic product samples will be made after mold finished and also would send you for your checking 6. Q: How about the mould modify? A:Modifying will be processed for free according to your comments if any difference from currently after you saw samples.And new samples will be made. 7. Q: How about the proprietary rights of the plastic injection mold? A: Customer paid the mould so it all belong to Customer.
Carbamide(Urea) H2N-CO-NH2 TDS- 2081-92 SPECIFICATIONS: 1. Nitrogen fraction of total mass on dry basise, %, not less 46.3-46.2 2. Biuret (Ureido Formamide) fraction of total mass, %, not more 0,6-1,4 3. Loose ammonia fraction of total mass, %, no more, for carbamide - crystal 0,01 - 0,01 - prilled 0,02- 0,03 4. Mass share of water, %, no more: - Method of drying 0,3 - Method Fishera 0,6 - 0,5 5. Friability, % - - 100 6. distribution of sizes, %: - fraction of total mass of granules with size, mm : 1 - 4, not less - - 94 less than 1, not less - 3-5 6-mm sieve residue, no more - Absence 7. Static hardness of granules, kgf/granule, not less - 0,7- 0,5 -0,3 Tha price is 230 $ FOB. Crystal carbamide (urea) is received from ammonia and carbon dioxide. carbamide is used in an industry as raw materials at manufacturing of pitches, glues, etc., for use in agriculture as mineral nitrogen fertilizer. Carbamide can be utilized in animal husbandry as fodder additive. Depending on purpose, two carbamide marks are produced: A- for industry; B for agriculture. Carbamide is non-combustible, fire-and is explosion-proof under normal conditions. As regards to its influence on organism, it falls into 3-rd class of hazardous substances. Carbamide is packed in paper bitumized of laminated bags, polyethylene bags, woven polymeric laminated bags woven polymeric bags with inserts, and also in soft specialized containers as MKR-1, OS. Carbamide is stored in closed store rooms protecting the product from rainfall. At storage of product in bulk its mixture with other fertilizers is not permitted. It is permitted to store carbamide containers and transport packages fastened by synthetic film on open areas. Warranty period of product storage 2 years from the date of manufacturing.
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers. Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows. The heating system is FANCOIL heaters connected to classical heating system. Basic equipment convectors as follows: • box (making possible options: fiberglass, metal powder-coated); • copper-aluminum heat exchanger; • flexible connection hoses with shut-off valves; • tangential fans (in models with forced convection) Optional equipment: • oak grill or duralumin (different colors, roll or longitudinal) • Electronic room thermostat; • converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300); • converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120); • smooth speed control of fans. Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting. Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors: • box of fiberglass-50 years • box with powder coating 10 years • wooden box (floor) - 2 years • copper-aluminum heat exchanger 10 years • aluminum grille-5 years • wooden lattice - 1 year • electrical parts - 5 years • valves - 1 year Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter. 9kg for 1 m.P sizes upon request
100% Compostable Bags From The Manufacturer Min. Order is 1 pallet (roughly 6,000 eur) Customisation available Perfect for eco-friendly retail chains Reach out for details!
Best quality chicken paws (claws) from the factory in iran. Delivery at the buyer's destination. Photos are available and factory is op[en for inspection. Sgs certificates at shipment. Your loi will be welcome. Paws of 35+ grams Length 7-9 cm 100% fresh and frozen Well dressed and cleaned. No bruises Excessive blood - no Bad smell - no Feather - no Broken bones no Moisture less than - 3% Blast frozen at -40 c Stocked at -18c
