Pressure-Volume and Flow-Volume, displayed waveforms can be cycled instantly with a touch of a button 3.Standard integrated metallic modular respiratory circuit; completely solves the problem of gas sealing under high temperature disinfection, easy to clean and disinfect 4.Power Failure Support Functions: Automatically converts to backup power mode during AC power outages 5.Equipped with electronic pressure differential flow sensor, imported respiratory control valve, stable and reliable, rapid response time 6.High precision five tube flowmeter, fitted with interlocking oxygen-nitrous oxide supply, guarantees oxygen output is never lower than 21% 7.Nonhazardous environmentally friendly frame, precise construction, elegant design, equipped with automated self-checking function during startup and an automatic self-calibrating sensor 8.Alarms: Audible and/or visual alarms for tidal volume, airway pressure, oxygen concentration, asphyxia, power failure, oxygen failure and other alarms, also features a alarm query function 9.Vaporizer: Imported tank components assembled locally; Enflurane, Isoflurane and Sevoflurane (Halothane optional). Also possesses self-compensating functionality 10.Advanced and stable Adjustable Pressure Limiting (APL) valve, suitable for low and ultra low flow anesthesia 11.Equipped with advanced international rotating Na-lime tank, easy-operate, requires only one hand, and uses imported PPSU material and temperature resistant to 134�°C 12. Multi-parameter Patient Monitor: Optional
Purpose: Dewatering and beneficiation of coal sludge and ore sludge, size 3...0 m; Dewatering and beneficiation of concentrate fines and fine materials, size 6…0, 5 mm Application: Concentration mills - dewatering and beneficiation of fine coal, ores, sand. Sludge tanks - dewatering of coal sludge and ore sludge, sand separation from sludge Mining plants - purification of industrial waters from mines, beneficiation of tailing dums of mining.
M2m, engineering, electronic, programming.
Electronics.
Medical equipments.Export & importation
Endoscopic equipment.
Cisco, LINKSYS, HP network equipment.
Gabbro stone mining- 40% of enterprise for sale.
Eggs, egg powder, egg yolk, egg white, albumen.
Turbine, Boiler, Avtomatic.
Distillation column, fractional distillation column, alcohol distillation column, gas distillation column, oil distillation column, petroleum distillation column.
Mining machinery.
Biodiesel equipment, rape seed.
Sugar, soybean, maize, corn, sunflower oil, oil seeds, milk products, diet products, sweets diet, butters, grains, buckwheat, elevator equipment, fertilizers, wood, agricultural machinery and equipment, industrial and mining equipment iron mines coal metallurgical, solar systems, energy, power plant, gas and diesel generators.
diiferent types of food processing machine are manufactured by utf group such as -pasta -puff pastry -cake -biscuits -bread -lavash -croissiant -papad -chapatii -snacks -rusk -bread sticks -grissini
Key features of the production line: Proofing of product at proofing chamber for improving quality of products; â?¢ Replaceable drums of forming machine for different kinds and sizes of product; â?¢ Options for additional equipment: - Automatic dough feeding system into extruder - Salt sprinkler at the oven entry - Oil sprinkling on the exit form the oven - Stackers for staking products in stacks; â?¢ Design of lines can be developed according to customerâ??s production premises. Equipment set of the line: - dough kneading device; - proofing chamber; - feeding conveyor; - extruder; - laminator; - three-modular rolling machine; - forming machine; - tunnel oven; - rotary conveyor; - cooling conveyor; - stacker Capacity - 300-1200 kg/h Quantity of dough layers: 8-16 Raw materials: flour Energy source electricity All components contacting with product are made of stainless steel AISI 304 Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
Organic creams, seafood, metals, services, telecom, banking products.Telecom and it services, banking applications, android, ios, windows
Surgical mask, kn95, antiseptic, rapeseed, rapeseed oil, sunflower oil, corn oil, sunflower seed, walnut, honey, coal, ferrous metal, non-ferrous metal.
Sports equipments.
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
