Lead ingots origin China Size:645*128*90mm Packing:lead ingot was wrapped by galvanized steel belt, 25pcs perbundle, about 1200 kg sperbundle. Price 1700USD CIFpayment 20% deposit TT and the final payment is paid after the container is sealed.
All types of rebars. Price after loi. For serious buyers! from 10000 mt/month. Standart rebar packing.
Steel bars, wire rod, hot rolled coils, sheets, re-bars, rebar.Shipping
Titanium slabs, ingots, bars, titanium alloys.
Titanium ingots, forged bars, rolled bars, sheets, plates, seamless tubes, wire.
Titanium bars, wire, rods, tubes, pipes, sheets and plates.
Cobalt salts, chromium nitrate, polyvinil alcohol, benzyl thiocyanate, tribasic lead sulphate.
Titanium materials:titanium ingots, titanium bars, titanium sheets, titanium plates, wire, titanium pipes.
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
Sunflower oil from the best sunflower varieties of the South of Ukraine. Refined and deodorized. Use: designated for a direct food consumption and food production. REFINED SUNFLOWER OIL Type: Refined, Winterized, Deodorized, Bleached. Standards: Conform to European Norm CEN/TC 307 or Standard of production country, and International Standard Organization ISO/TC 34/SC11, International Food Standards of United Nations and FAO Codex Alimentarius CODEX STAN 210-1999 Standard for Named Vegetable Oils. Quality: Fit for human consumption, free from foreign matter, any other oil or animal fats. Color: Light yellow, clear and transparent. Odor: Neutral odor, without an artificial odor additive. Visibility: Without any deposition and blurriness. Taste: Neutral, without an artificial taste, free from rancidity or any strange or bad taste and smell. Shelf Life: 24 months Physical and Chemical Analysis Values: (The values may vary within standards) Acidity (Free Fatty Acid): 0,3 maximum. Peroxide Value (meq O2 / kg Oil) at End of Expiry Date: 8,0 maximum. Peroxide Value (meq O2 / kg Oil) at Production Date: 1,0 maximum. Iodine Value (WIJS): 118 - 141 Moisture and Volatile Matter (% at 105oC): 0,2 maximum. Saponification Value (mg KOH / g oil): 188 - 194 Unsaponifiable Substances (%): 1,5 maximum. Insoluble Substances in Fat Solvent (%): 0,05 maximum. Refractive Index (at 40oC): 1,461 - 1,468 Specific Weight (g at 20oC): 0,910 - 0,925 Soap Content (%): 0,005 maximum. Amount of Phosphorous: Maximum 5 ppm. Remains of Solvent: None. Heavy Metal Analysis: Mercury (Hg): 0,02 mg / kg maximum. Cadmium (Cd): 0,02 mg / kg maximum. Arsenic (As): 0,05 mg / kg maximum. Copper (Cu): 0,1 mg / kg maximum. Lead (Pb): 0,1 mg / kg maximum. Iron (Fe): 1,5 mg / kg maximum. Zinc (Zn): 5 mg / kg maximum. Nutrition Facts in 100 gram: Energy: 829 kcal / 3400 kjoule Total Fats: 100 g Protein: 0 g Carbohydrate: 0 g Cholesterol: 0 g Vitamine: The product does not contain any added vitamine. GMO: Free from Genetically Modified Organisms (GMO). X-Ray Contamination Level: Meets requirements Euratom 3954 / 87. Halal Nutrition (Islam): Meets requirements. Kosher Meats (Jewish): Meets requirements. Vegan or Full Vegetarian: Meets requirements. Lacto Vegetarian: Meets requirements. Ovo - Lacto (Egg - Milk) Vegetarian: Meets requirements. PRODUCT NO GMO
Place of Origin: Xiamen,China Brand Name: OEM brand Model Number: Uzet-pipe-001 Plastic molds material:Steel P20.718HH, 2738 ,H13, 45#,C50 ect Shaping Mode: Plastic Injection Mold Product Material: Plastic Product: Household Product Precision: 0.005mm Design service: available Plastic Material: PP , PS, PET, PE ,ABS,ect Mould Base: LKM.HASCO,ect Cavity: Single/Multi Runner: Cold /Hot Surface treatment: machined finish Mold Life: 500000shots-1000000shots Design Software: UG ,Proe ,CAD/CAM,ect Lead Time: 25-30days Delivery Port: xiamen,China Packaging Details: wooden case + bubble bag cardbord box + bubble bag OEM Factory of Injection Plastic Mold Manufacturing from China Supplier Product Type Plastic injection mold(mould) Our Services Plastic mold design, plastic mold making, products sampling,plastic products produce,plastic injection molding, Material Aluminum,Brass,Stainless Steel,Copper,Plastic, Or as per the customersâ?? requirements Surface Treatment Anodizing,Sandblasting,Painting,Powder coating,Plating,Silk Printing,Brushing,Polishing,Laser Engraving Drawing Format .jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc Service Project To provide production design, production and technical service, mold development and processing, etc Testing Machine Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester and so on Packing Foam, Carton, Wooden boxes, or as per the customerâ??s requirements Payment Terms T/T,Western Union,Paypal,LC, DP,DA Certification SGS, ISO9001 FAQ 1. Q: What kind of products can you do? A:plastic mould, injection mold, Plastic injection molding , plastic parts mass production . 2. Q: What kind information is needed for quotation? A: 1) Sample photo with size or 2D/3D design 2) Product material 3) The quantity 4) Runner type: cold or hot 5) Mould steel type, P20, 718, 2738, H13, S136, 2316 etc. 3. Q: I have no 3D drawing, how should I start the new project? A: Sample is needed OR your ideas,then we could help to finish the 3D drawing. 4. Q: How long will it take for finishing injection mold? A: Usually it will take around one month to finish plastic injectioin mold. 5. Q: How about the samples? A: Some plastic product samples will be made after mold finished and also would send you for your checking 6. Q: How about the mould modify? A:Modifying will be processed for free according to your comments if any difference from currently after you saw samples.And new samples will be made. 7. Q: How about the proprietary rights of the plastic injection mold? A: Customer paid the mould so it all belong to Customer.
We can supply the following non-ferrous metals: Aluminum Ingots, Copper Ingots, Copper Cathode, Lead Ingots, Zinc Ingots. Please contact us to discuss the details of the transaction.
Berezivski mineral waters is one of the largest plant in Ukraine producing natural mineral water at source. Waters of our mineral springs are the most similar to the waters of a mineral spring of SPA Belgium. The stable and unique composition of Berezivska natural mineral water, its flavor qualities and a stylish design of a bottle, product assortment, advertising, commercial work of a team give us the possibilities to hold leading positions on the market of sales of mineral waters of Ukraine. We export our water to Russia, Kazakhstan, and Spain. The quality control system of our plant is certified compliant with international ISO 9001:2009 standard, and the production processes of TM "Berezivska" are certified. Berezivska mineral water is included into the Mineral waters of a planet catalogue. We offer competitive pricing, stable and high quality of production, decency and timeliness of deliveries that will provide high and stable incomes to your company. Berezivska natural mineral water will satisfy the highest requirements of the most exacting customers and consumers.
We supply sugar to any country. Please, if you are interested please contact me. PRICE (CIF SPOT): 12,500 MT= $ 440.00 25,000 MT = $ 390.00 50,000 MT = $ 370.00 75,000 MT = $ 360.00 100,000 MT = $ 345.00 200,000 MT = $ 305.00 PRICE (CIF ANNUAL CONTRACT) : 12,500 MT x 12 = $ 385.00 25,000 MT x 12 = $ 365.00 50,000 MT x 12 = $ 335.00 75,000 MT x 12 = $ 320.00 100,000 MT x 12=$305.00 200,000 MT x 12=$290.00 300,000 MT x 12=$280.00 PRODUCT: ICUMSA 45 Sugarwhite (IC 45). Origin: BRAZIL. White Refined Sugar â?? shallconformtothefollowingspecificationsand/oringternational Standards specifications, fitforhumanconsumption. SPECIFICATIONS: POLARITY at 20ºC: 99.80º Minimum SULPHATED ASH CONTENT: 0.04% MaximumbyWeight MOISTURE: 0.04% MaximumbyWeight MAGNETIC PARTICLES: mg/kg 4 SOLUBILITY: 100% Dry&freeflowing GRANULOMETRY: Fine Standard ICUMSA: Colour 45 ICUMSA attenuationindexUnits (Method #10-1978) Maximum Max AS: 1 P.P.M. MaxPb: 2 P.P.M MaxCu: 3 P.P.M. COLOUR: BrilliantWhite REDUCING SUGAR: 0.010% MaximuminDryMass RADIATION: Normal w/o presenceofcesiumoriodine SO2: mg/kg 20 HEAVY METALS, TOXIC ELEMENTS Maximummg / kgbasis ARSENIC 0.50 CADMIUM 0.05 COPPER 1.00 LEAD 1.00 MERCURY 0.01 ZINC 3.00 PESTICIDE TRACES Maximummg / kgbasis DDT 0.005 PHOTOXIN 0.01 HEXACHLORAN GAMMA ISOMER 0.005 MICROBIOLOGICAL LIMITS PATHOGENIC BACTERIA including SALMONELLA per 25 gram: Nil. Bacilluspergram: Nil CROP: CURRENT AVAILABLE (2014/2015)
Polyethylene pressure pipes PE-100 for sewerage systems. Polyethylene pressure pipes for sewerage are used for construction and repair of outdoor pipelines, transporting water of household and drinking supply.Leading raw suppliers are European manufacturers SABIK, TOTAL. Pipes are made of polyethylene PE 100 class and correspond to standard dimension ratio SDR 41 - SDR 6, with nominal diameters from25to500 mm, including main working pressures 4; 6; 8; 10; 12,5; 16; 20 bar. Pipes, produced in linear segments, have the length 12 m (or another by agreement with the customer). Pipes with diameter not more than 160 mm can be produced in hanks (cylinders) from 50 to 1000 m. Pipes with diameter up to 110 can be connected by means of mechanic (compression) fittings. Polyethylene pipes of major diameters are connected mainly by means of jam-weld or by means of thermistor fittings that requires special welding equipement. Such connection is monolithic and considered to be the most reliable. -------- Polypropylene casing pipes with connecting threads for the construction of water supply wells and also production wells. The sinking of wells using casing pipes allows to avoid groundwater pollution, and also increase the speed of sinking thanks to reduced diameter in comparison with usual steel pipes. Blue casing pipesfor wells have the following diameters: Pipes are made of copolymere propylenes, which have better mechanical and ecological chracteristics than PVC pipes for wells. ------- Two-layered fluted polymeric pipes for outdoor sewerage (POLYCORR). Polymeric pipes corresponds to the requirements of European standard project EN1401-1; 1999,material for pipes production-block-copolymer polypropylene PP of leading European manufacturers BASELL,?V?.Nominal bore D 200, 300, 400, 500, 600, 800,? type of tube, circular rigidity SN4, SN8,SN16. Pipes produced by means of continuos extrusion method, have double closed structure of wall. The smooth inner surface and the corrugated outer wall. Pipes are connected by means of flayers, produced on the pipes during production process. The color of standard pipes and molded pieces for sewerage -ginger, the color of inner walls of pipes - white. PP pipes are designed for nonramming underground systems of public sanitary and storm water drainage.
Agrarian center, a leading ukrainian agricultural company provides supplies of sunflower oil originated from ukraine. We export to any near and distant countries of the world: eu, africa, arab countries, asia. Sunflower oil refined, deodorized, chilled, cold pressed. Packaging: 1l and 5l pet bottles. In cardboard boxes, each box contains 15 bottles (1 l). We offer you a long-term and reliable cooperation! -
AGRARIAN CENTER, a leading Ukrainian Agricultural Company provides supplies of soybean oil originated from Ukraine to the CIS, EU, Near and Far abroad countries. Soybean oil - crude, unrefined, extraction, fat, vegetable, natural, liquid. It is made from seeds (beans) of soy commodity, the first grade, DSTU: 4534:2006. Without GMO. It is intended for processing in the oil and fat industry. The country of origin - Ukraine. Without prepackage, bulk in flexi-tanks. We offer you a long-term and reliable cooperation!
AGRARIAN CENTER, a leading Ukrainian Agricultural Company provides supplies of pe-tsai originated from Ukraine to the CIS, EU, Near and Far abroad countries. Celery cabbage is delicious, green, juicy, solid, high-quality, well-transportable over long distances, complies with the EU standards of processing. Grade: Belko. Size: 30cm or less. Packaging: plastic bag of 18 kg (moreover, each unit freshness is kept by covering with food film). On Euro pallets. Upon custom request, we also provide packing of Pe-tsai in other containers. Terms of delivery: FCA, FOB.
Agrarian center, a leading ukrainian agricultural company provides supplies of carrots originated from ukraine to the cis, eu, near and far abroad countries. Carrots are beautiful golden coloured, smooth, solid, tasty, juicy, high-quality, well-transportable over long distances, comply with the eu standards in terms of quality. Grade: abako. Length: 15 cm and more Packaging: string bag of 18-20 kg Palletized on pallets. Upon custom request, we provide: - packing in string bags of 2 kg, 4 kg and 10 kg - calibration according to a buyer's order - washing and polishing.
