Please click here to check who's online and chat with them.

Find Verified Copper Pipes Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : -   Kiev   Odessa  
Mar-22-21

Copper Cathode From Russia

$164.00
MOQ: Not Specified
 
Offer of copper cathode 99,999 % for export
Ingots, weight 1 kg, vacuum packed in boxes of 25 kg
Copper (metallic) high purity Isotope Cu63 / Cu65
Price at 164 euros customs
Payment when loading in Russia, Voronezh
Other forms of payment can be discussed
Apr-30-23

Copper Cathode

$5.4k
MOQ: Not Specified
Supplier From Kiev, Ukraine
 
Copper cathode 99.98%
Price 5400 USD
TT is 30% of the deposit and the final payment is paid after the container is sealed
Jun-16-22

Copper Cathode

$6.0k
MOQ: Not Specified
Supplier From Kiev, Ukraine
 
Copper Cathode from genuine supplier .
Price 6000 USD MT CIF
MOQ 500
Also have copper millberry 5000 usd MT
Aug-13-21
 
We are offering you the Copper Wire Scrap Millberry 99.99% at $3800 Mt/cif any port
Copper detailed specification :

Wire diameter: 0.30mm, 0.25mm, 0.20mm
Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg
Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2

Copper Scrap CERTIFICATE OF ANALYSIS

Item Standard Result
Cu% 99.9 min 99.99
Sb% 0.002max 0.001
As % 0.002max 0.0006
Fe% 0.005 max 0.0012
Ni% 0.002 max 0.0008
Pb % 0.005max 0.0025
Sn% 0.002max 0.0007
S% 0.005max 0.003
O% 0.002max 0.001
Zn% 0.005max 0.002
P% 0.001max 0.0002

ELEMENTS VALUE RESULT
Copper Cu 99.95% Min.
Cobalt Co 0.001% Max.
carbon C 0.003% max
Iron Fe 0.005% Max.
phosphorus P 0.01% Max.
sulphur S 0.01% Max.
Znic Z 0.03% Max.

Minimum Order: 25 MT
Capacity: 10,000 mt
Location: Eastern Europe
Payment terms: Bank transfer only.
Supply Ability
Supply Ability
30000 Metric Ton/Metric Tons per Month


Regards
Newman Cole
Aug-07-15

Floor Convector Fancoil

$174.00
MOQ: Not Specified
Supplier From Kiev, Ukraine
 
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers.
Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows.
The heating system is FANCOIL heaters connected to classical heating system.
Basic equipment convectors as follows:
• box (making possible options: fiberglass, metal powder-coated);
• copper-aluminum heat exchanger;
• flexible connection hoses with shut-off valves;
• tangential fans (in models with forced convection)
Optional equipment:
• oak grill or duralumin (different colors, roll or longitudinal)
• Electronic room thermostat;
• converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300);
• converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120);
• smooth speed control of fans.

Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting.
Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors:
• box of fiberglass-50 years
• box with powder coating 10 years
• wooden box (floor) - 2 years
• copper-aluminum heat exchanger 10 years
• aluminum grille-5 years
• wooden lattice - 1 year
• electrical parts - 5 years
• valves - 1 year
Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter.


9kg for 1 m.P
sizes upon request
125 Copper Pipes Suppliers
Short on time? Let Copper Pipes sellers contact you.
Apr-30-23

Copper Wire

$4.3k
MOQ: Not Specified
Supplier From Kiev, Ukraine
 
Copper wire 99.97%
Price 4300 USD
TT is 30% of the deposit and the final payment is paid after the container is sealed
Sep-09-16
 
Polyethylene pressure pipes PE-100 for sewerage systems. Polyethylene pressure pipes for sewerage are used for construction and repair of outdoor pipelines, transporting water of household and drinking supply.Leading raw suppliers are European manufacturers SABIK, TOTAL. Pipes are made of polyethylene PE 100 class and correspond to standard dimension ratio SDR 41 - SDR 6, with nominal diameters from25to500 mm, including main working pressures 4; 6; 8; 10; 12,5; 16; 20 bar. Pipes, produced in linear segments, have the length 12 m (or another by agreement with the customer). Pipes with diameter not more than 160 mm can be produced in hanks (cylinders) from 50 to 1000 m. Pipes with diameter up to 110 can be connected by means of mechanic (compression) fittings. Polyethylene pipes of major diameters are connected mainly by means of jam-weld or by means of thermistor fittings that requires special welding equipement. Such connection is monolithic and considered to be the most reliable. --------

Polypropylene casing pipes with connecting threads for the construction of water supply wells and also production wells. The sinking of wells using casing pipes allows to avoid groundwater pollution, and also increase the speed of sinking thanks to reduced diameter in comparison with usual steel pipes. Blue casing pipesfor wells have the following diameters: Pipes are made of copolymere propylenes, which have better mechanical and ecological chracteristics than PVC pipes for wells. -------

Two-layered fluted polymeric pipes for outdoor sewerage (POLYCORR). Polymeric pipes corresponds to the requirements of European standard project EN1401-1; 1999,material for pipes production-block-copolymer polypropylene PP of leading European manufacturers BASELL,?V?.Nominal bore D 200, 300, 400, 500, 600, 800,? type of tube, circular rigidity SN4, SN8,SN16. Pipes produced by means of continuos extrusion method, have double closed structure of wall. The smooth inner surface and the corrugated outer wall. Pipes are connected by means of flayers, produced on the pipes during production process. The color of standard pipes and molded pieces for sewerage -ginger, the color of inner walls of pipes - white. PP pipes are designed for nonramming underground systems of public sanitary and storm water drainage.
Mar-25-14
Supplier From Kiev, Ukraine
Apr-25-16
Supplier From Kiev, Ukraine
Feb-08-19
 
Customizable fittings for bathroom and Kitchen. Faucets, wash bashins etc
Mar-26-13
Supplier From Kiev, Ukraine
May-12-18
Supplier From Kiev, Kiev, Ukraine
Nov-20-18
 
Place of Origin: Xiamen,China
Brand Name: OEM brand
Model Number: Uzet-pipe-001
Plastic molds material:Steel P20.718HH, 2738 ,H13, 45#,C50 ect
Shaping Mode: Plastic Injection Mold
Product Material: Plastic
Product: Household Product
Precision: 0.005mm
Design service: available
Plastic Material: PP , PS, PET, PE ,ABS,ect
Mould Base: LKM.HASCO,ect
Cavity: Single/Multi
Runner: Cold /Hot
Surface treatment: machined finish
Mold Life: 500000shots-1000000shots
Design Software: UG ,Proe ,CAD/CAM,ect
Lead Time: 25-30days
Delivery Port: xiamen,China

Packaging Details:
wooden case + bubble bag
cardbord box + bubble bag

OEM Factory of Injection Plastic Mold Manufacturing from China Supplier
Product Type Plastic injection mold(mould)
Our Services Plastic mold design, plastic mold making, products sampling,plastic products produce,plastic injection molding,
Material Aluminum,Brass,Stainless Steel,Copper,Plastic, Or as per the customersâ?? requirements
Surface Treatment Anodizing,Sandblasting,Painting,Powder coating,Plating,Silk Printing,Brushing,Polishing,Laser Engraving
Drawing Format .jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc
Service Project To provide production design, production and technical service, mold development and processing, etc
Testing Machine Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester and so on
Packing Foam, Carton, Wooden boxes, or as per the customerâ??s requirements
Payment Terms T/T,Western Union,Paypal,LC, DP,DA
Certification SGS, ISO9001



FAQ
1. Q: What kind of products can you do?
A:plastic mould, injection mold, Plastic injection molding , plastic parts mass production .
2. Q: What kind information is needed for quotation?
A: 1) Sample photo with size or 2D/3D design
2) Product material
3) The quantity
4) Runner type: cold or hot
5) Mould steel type, P20, 718, 2738, H13, S136, 2316 etc.
3. Q: I have no 3D drawing, how should I start the new project?
A: Sample is needed OR your ideas,then we could help to finish the 3D drawing.
4. Q: How long will it take for finishing injection mold?
A: Usually it will take around one month to finish plastic injectioin mold.
5. Q: How about the samples?
A: Some plastic product samples will be made after mold finished and also would send you for your checking
6. Q: How about the mould modify?
A:Modifying will be processed for free according to your comments if any difference from currently after you saw samples.And new samples will be made.
7. Q: How about the proprietary rights of the plastic injection mold?
A: Customer paid the mould so it all belong to Customer.
Dec-29-18
Supplier From Kiev, Ukraine
Oct-18-21
Supplier From Kiev, , Ukraine
Jun-10-19
Supplier From Kiev, Ukraine
Jun-02-23
Supplier From Kiev, Kiev Oblast, Ukraine
Jun-08-17
Supplier From Kiev, Ukraine
Sep-26-16
Supplier From Kiev, Ukraine
Supplier Of Sugar   |   Sesame Seeds   |   Vanilla   |   Chia Seeds   |   Charcoal   |   Wood Shavings   |   Chickpeas   |   Coffee Beans   |   Soybean Oil   |   Pepper   |   Copper Scrap   |   Health Food   |   Beverages   |   Coffee   |   Sunflower Oil   |   Corn Oil   |   Firewoods   |   Cashew Nuts   |   Soft Drinks   |   Fish   |   Mango   |   Briquette   |   Milk & Milk Products   |   Lentils   |   Chocolates   |   Flour   |   Printing Paper   |   Shrimps & Prawns   |   Pumpkin Seeds   |   Wood Chips   |   Copper Plate Scrap   |   Fresh Shrimps   |   Wheat Flour   |   Shampoo   |   Fresh Mackerel Fish   |   Used Clothings   |   Pistachio   |   Walnuts   |   Copper Scrap   |   Meat & Poultry   |   Flax Seeds
Jun-17-16
Supplier From Kiev, Ukraine
125 Copper Pipes Suppliers
Short on time? Let Copper Pipes sellers contact you.