The insulators testing device HVTS-HP is designed for testing the insulation of power cables and solid dielectric with the rectified voltage of up to 100 kV, as well as testing solid dielectrics with the sinusoidal voltage of up to 100 kV, 50 Hz. The main difference between series devices Cable test and diagnosis system HVTS-HP devices from Portable Hi pot Tester HVTS-70/50 is the increased power output. There are two standard versions: 7.5 KVA and 17.5 KVA.
SWG-12 Mobile Cable Test and Fault Location System - is a complex solution for safe, fast and easy locating a faulty place on low and medium underground voltage cables. It includes a powerful high-voltage unit, which has a test, burn and surge generation modules, and a time-domain reflectometer for locating faults on cables. Main features: - Suitable for portable application - Easy to operate - Multiple fault location methods included - 10.4 High-contrast color TDR display - Improved convenience for operator - Heavy duty The high-voltage unit of the system provides with high-power up to 1100 Joules surges at 3; 6 and 12 kV ranges. At each range, the output voltage is smoothly adjustable. The rate of surge waves can be smoothly adjusted. The single manual shot option is also included. The DC output mode is provided for quick fault diagnostics. The 100 mA burn mode is available. Digital Impulse Reflectometer (TDR) provides you with 10.4-inch bright high-contrast TFT display with touchscreen. The 800 Ã? 600 pixels resolution makes the picture sharp. The touchscreen allows an operator navigate through the menu fast and easy. An alternative way of navigation is included. It is provided with a control knob. Reflectometer RIF-9 integrates a multiple ways of fault prelocation. It can be used either as a standalone device in TDR mode or in a conjunction with HVmodule, working in arc reflection mode. Reflectometer RIF-9 has USB interface. The package content includes software for PC (optional), which allows working with saved reflectograms. The firmware can be easily updated through USB interface by inserting a flash drive.
VLF-60 Cable Insulation Tester by KEP is a very low frequency high potential tester that ensures efficient testing and fault location on medium voltage cables. Testing principle Very low frequency (VLF) testing involves applying frequency in the range of 0.01 to 0.1 Hz to the cable under test, which is non-destructive to insulation of proper quality, but is enough to detect cable faults. Compared to DC cable testing, which can be damaging to good insulation, VLF testing does not have such a detrimental effect on the cable being tested and does not generate any travelling waves. Main features Efficient non-destructive cable withstand testing Portable, perfect for field testing Fully automatic testing cycle Automatic discharging Easy maintenance due to solid-type insulation system Breakdown voltage measurement and load recognition Easy-to-use software Does not need an external PC LCD touch screen
Automatic circuit breaker tester UPA-3 is designed for testing and ampere-second characterization of automatic AC current circuit breakers. The device allows registering the value of the supplied current and timing the automatic circuit breaker switching interval. Circuit breaker tester UPA-3 is a mobile device, which could be easily transported to a required testing location. Circuit breaker tester UPA-3 operates on the principle of varying the power in the primary circuit of the matching power transformer and, respectively, varying the output current, flowing through the automatic circuit breaker under the test. Power regulation could be done either through an external regulator (RNO or VR) or through a built-in thyristor controller.
High voltage field testing equipment, insulating liquids testing and cable and calibration test vans.
The sensor temperature measuring of the steel equipment or axle bearing is designed to measure the temperature of axle boxes with the transferring data to wagon controller. The temperature sensor is attached directly to the axle box cover with a bolted connection. The power element of the temperature measuring sensor is a built -in battery. Fastening type bolted joint; Range of working temperatures 40 + 85 C Range of measured temperatures 40 + 125 Accuracy of temperature measurement 0.5 Frequency plan EU433 ; The period of communication is adjusted; Type of antenna built-in ; Sensitivity -114 dBm ; Radio communication range in the tunnel up to 100 m ; Transmitter output power up to 20 mW ; Built-in battery capacity 2700 mAh ; Continuous battery life p to 2 years ; Dimensions, mm not more than 119 x 32 x 32 ; Weight, g, not more than 300 ; Total service life, years, not less than 10 ; The operating mode is long ; Dust and water protection rating IP65.
Enclosures, telecom cabinets, vandal proof cabinets, optical fiber cables and connectors..Manufacture
We produce embossing rolls for the production of paper napkins, towels, wallpaper, gravure rolls for applying acrylic foam (used in wallpaper production), as well as for embossing other various materials such as foil, metal, leather, wood, mdf, plastic film and others. ). The embossing pattern is agreed with the customer. Possibility of producing these shaft sizes: diameter up to 400 mm length up to 4 meters both according to the drawings of the Customer, and according to your We produce embossing rolls with different patterns and different sizes. "LASER ENGRAVING" - deep engraving (large assortment of drawings). "MECHANICAL" - the method, when transferred to a paper base, makes it "fluffy" and pushes through even the most low-quality base. (the assortment of drawings is not large). "CARDBOARD" (reciprocal) - we make according to any size, we make reconstruction of shafts. Delivery time and price depend on the complexity of the shaft manufacturing.
LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch. LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output. The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate. A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω). MAIN FEATURES: Portable and lightweight Moistureproof and dustproof case Advanced LiFePO4 internal battery with fast charging option High-contrast graphic OLED display Multifrequency operation Operating frequencies can be changed upon request Internal transmission loop antenna Automatic load impedance matching Ability to work with energized 0.4kV cables (inductive connection) Overload protection Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
Public transport, local payment systems, access control and management systems. turnstile, avm/tvm, validators, parking, axle bearing temperature monitoring.Development
Medical Equipment & Mask, Food Products, Construction Materials, Sunflower Oil & Product, Bar & Beverages, Automotive Spare Parts, Cooking Oils, Electronic & Hardware Products, Sports Items.Shipping
Vivassens products are the scientific discovery, very powerful natural immunostimulants and immunomodulators. strengthening of immunity is already seen during the first period of treatment (2 weeks). the results of preclinical studies have shown its high efficiency. due to its special form (paste) the absorption of all useful materials, vitamins, amino acids, micro and macro elements, photocompositions, begins in the mouth ( the action of fulvic acid, a very powerful catalyst) before they enter the stomach, away from the hydrochloric acid action. chelated vitamins and minerals (digestion only together with amino acids) are the best and most effective way of their absorption. We offer the following types of bio-paste:
Grain Energy LLC produces aerodynamic grain separators "ASM" with a capacity of 5 to 50 t/h intended for cleaning and calibration: wheat, barley, flax, soybeans, coffee, sunflower, corn and other crops. Minimal energy consumption due to the use of a frequency converter of European production. The efficiency of the separator is VERY high. The output of the cleaned and calibrated material occurs through 7 trays: - the first gets the largest debris (stones, pieces of earth, stems, spikelets, etc.); - material from the middle part of the ear, corn cob or sunflower cap gets into 2-3 trays. This is the most viable material of the whole heap, seed germination rate up to 98%; - material from the bottom of the ear gets into 4-5 trays - this is commercial grain, varietal, which will bring the maximum profit - grain from the upper part of the ear (unripe, light, halves, crushed grain) falls into 6-7 trays. Which in an unclean heap significantly reduces the cost of the harvested crop! Advantages of the ASM grain cleaning machine �· Work with material of any moisture and debris; Versatility - works with any bulk materials: grain, groats, chaff, etc. Low power consumption; All parts are cut by plasma cutting - precision during assembly and quality of the separator; high performance; Only high-quality European components; Does not require complex care and maintenance; Modular assembly-disassembly system; During aerodynamic separation the seed is not injured, the marketable grain has a high degree of purification from grain, mineral and other impurities. Allows you to prepare high-quality and viable seed 2 years warranty. Grain Energy LLC successfully sells equipment to the countries: Ukraine, France, Lithuania, Latvia, Albania, Bulgaria, Romania, Hungary, Austria, Germany. We carry out dispatch and support of equipment for export. We are looking for partners in your country.
Greenpower is a company that develops and manufactures environmentally friendly equipment for charcoal production since 2001, presents new charcoal kiln ck-4 euro. Charcoal kiln ck-4 euro refers to fourth generation of charcoal kilns of euro type, which are designed for low-temperature pyrolysis of carbon-containing materials (lump wood waste of logging and woodworking industries, firewood of soft and hard species, fuel briquettes (pini-kay, nielsen, nestro, ruff)) to obtain high quality charcoal and heat energy. The uniqueness of the euro kiln technology is following: we do not move raw material from chamber to chamber, we move the process that provides high performance at relatively low cost. Charcoal kiln ck-4 euro is capable of producing up to 70 tons of high quality charcoal per month. The main advantages of ck-4 euro are: mechanization and automation of control of charcoal kiln operation, remote control, alarm mode, the complete absence of emissions during operation and others.
GreenPower company offers the best-quality charcoal from pini-kay briquette produced by law-temperature pyrolysis. Pini-kay briquette charcoal is suitable for use in metallurgy as well as for domestic use - fireplaces, barbeques, etc. It is eco-friendly product and does not emit any smoke and smell. Technical specifications: Material - 100% hardwood briquettes Fixed carbon content is more than 85% Ashes content is no more than 1% Volatiles content is no more than 12% Burning time is more than 5 hours. Packaging sizes and materials can be discussed..
Drying complex or drying chamber (dryer for firewood, wood dryer) is designed for quick drying of technical wood or fuelwood (firewood with a moisture content
GreenPower company produces and sells filter elements of various capacities multicyclone or battery cyclone. It belongs to a group of mechanical cleaners with dry cleaning method of high efficiency. Cleaning efficiency from particles sized 5-10 μm is 90%, while from particles that are larger is 99%. Production of cyclone elements from basal castings of modular construction improves their efficiency, durability and simplified assembly. Possible places of multicyclone (battery cyclones) using: ferrous and non-ferrous metallurgy enterprises, granaries and processing plants, bread-baking complex, oil-extraction plants, starch plants, energy industry, cement plants, chemical industry, coal industry, gas pipelines.
GreenPower company specializes in the design and manufacture of complexes, allowing to neutralize - to utilize MSW (municipal solid waste), industrial waste, medical waste, port waste, quarantine and other hazardous waste in the place of their formation, thus eliminating the need for daily removal to the utilization site. Our complexes are designed for complete and absolutely safe neutralization of medical waste and other hazardous waste. The waste processing (waste utilization) or waste destruction is provided by method of THERMOCATALYTIC NEUTRALIZATION OF WASTE - environmentally friendly process. This development combines two key technologies, which are recognized by the world environmental community and the project "Europe, free from toxicants-2" as promising and close to industrial use. Complexes can be developed with capacity of 100 kg/hour, 300kg/hour, 500 kg/hour and 1000 kg/hour. If you have any questions, please donâ??t hesitate to contact us by phone +380577174464 or send us email to info[at]piroliz.org
Environmentally friendly equipment for chaarcoal production, charcoal, charcoal from pini-kay briquettes.
Personal protection equipment and cable fasteners.Manufacturer
