A new ANG 01 aircraft has been designed and manufactured in 2019. ANG 01 is based on the concept of LA-50 aircraft, At the same time, ANG 01 is substantially more perfect than its predecessor. Thus, due the use of new carbon fiber materials, its weight was reduced and its strength characteristics were enhanced.
Owing to the usage of specialized computer programs, the company specialists have managed to implement an optimum structure of the fuselage and wing, having achieved hereby their best performance. We have also used the advanced products for computer-based wind-tunnel simulation that allows modeling the characteristics of the airframe and fine-tuning them at the development phase.
The development of the aircraft was performed, based on the latest technological achievements, with the use of the up-to-date CAD systems for aircraft design computing, which allowed to carry out the design strength aerodynamics testing, etc. with high precision directly in the computer. Due to the calculations solely in CAD systems, we have obtained the aircraft empty weight of 380-400 kg (maximum configuration), while the maximum take-off weight is of 950 kg. Thus, the payload is 550-570 kg, that is 137%-150% of its own weight.
Besides, to enhance the safety of the aircraft, it was equipped with a modern parachute rescue system GRS 6 800-990 SDS manufactured by the Czech company Galaxy GRS s.r.o.
Reliability and ease of control is provided by modern electronic SkyView HDX system manufactured by Dynon Avionics.
Specifications
Number of Seats 5
Engine Rotax 915 iS3A 141 HP
fuel Type Avgas A-92, A-95, A-98, 100LL
Propeller 3 blade, Variable Pitch Type
Landing Gear trycicle type, hydraulically retractable
Maximum Takeoff Weight 950 kg
empty weight 380 kg
The capacityof fuel tanks 245 l
wing area 11,3 m2
Wingspan 9,6 m
Aircraft Length 7,138 m
Height 2,65 m
fuselage width MAX 1,35 m
cabin height 1,2 m
Cabin length MAX 2.3 m
Wing loading 84 kg/m2
Landing Gear Tread 1.9 m
wheel size 8â?? (420 mm)
Luggage Compartment Capacity 780 liters
Maximum Lift-to-Drag Ratio 18.6
Max speed 360 km/h
Maximum cruising speed 345 km/h
Cruising speed 85% 310 km/h
landing speed 70 km/h
Cruising speed 65% 290 km/h
rate of climb 3,5 m/s
Takeoff Run 300 m
Landing Roll 150 m
at an altitude of 4000m Climb rate 8.3m / sec
optional equipment - spares and assemblies to metallurgical and mining equipment such as gears, shafts (length up to 8000 mm), crane parts (drums, wheels, balancers), reducers, traverses, pinion shafts, rolling mill parts (beams, spindles, pads), crasher screens, steel ladles, steel and blast furnace parts. Max .workpiece net weight for machining up to 50.000 kgs.
Hi,
We are a factory in Ukraine for producing fibre-reinforced plastic rebar, (FRP rebar).
If you interested, pls contact me
mykhalchukmax(AT)ukr.net
Thanks!
Max
1432 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers.
Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows.
The heating system is FANCOIL heaters connected to classical heating system.
Basic equipment convectors as follows:
• box (making possible options: fiberglass, metal powder-coated);
• copper-aluminum heat exchanger;
• flexible connection hoses with shut-off valves;
• tangential fans (in models with forced convection)
Optional equipment:
• oak grill or duralumin (different colors, roll or longitudinal)
• Electronic room thermostat;
• converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300);
• converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120);
• smooth speed control of fans.
Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting.
Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors:
• box of fiberglass-50 years
• box with powder coating 10 years
• wooden box (floor) - 2 years
• copper-aluminum heat exchanger 10 years
• aluminum grille-5 years
• wooden lattice - 1 year
• electrical parts - 5 years
• valves - 1 year
Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter.
Pts controller over fuel dispensers and atg systems for petrol stations is a forecourt controller intended to be used in connection with third party control system for petrol station (pos system, cash register, opt terminal, etc) to provide simultaneous remote control over petrol, diesel, cng and lpg dispensers and automatic tank gauge (atg) systems installed at petrol, cng and lpg stations and storage depots.
Pts controller provides control using the single common communication protocol. Pts controller works as a protocol converter and provides conversion of its common communication protocol into various proprietary communication protocols of fuel dispensers and atg systems.
Pts controller is supplied with a rich set of api (application programming interfaces) developed under most popular programming languages and environments in order to make comfortable and quick implementation of pts controller into control systems for petrol stations (pos system, cash register, opt terminal, etc).
For more information please visit our website www.Technotrade.Ua
signed to transmit / receive data via radio channel at a speed of up to 9600 bit / s in the frequency range (2410-2465) mhz with the transmitter output power up to 10 mw.
If cable routing between devices (which usually are using wired communication channels for data exchange) is impossible, then it is necessary to look for other means of communication, other than wired. Wireless transmission of data between devices is one of possible solutions for this problem. Wcd is a variation of radio extenders for communication lines using for communication interfaces rs-232 and rs-485.
For more information please visit our website www.Technotrade.Ua
Appearance pale yellow , viscous , clear liquid
Moisture0.25 % max.
F.F.A. ( as oleic ) 1.00 % max.
Acid value ( mg koh/g )2.00 % max.
Iodine value (wijs)82 û 90
Saponification value (mg koh/g )177 û 185
Hydroxyl value158 û 163
Relative density @ 30¦c 0.954 û 0.960 gm/ ml
Colour on lovibond in 5.25öcelly- 20.0 max. R - 2.0 max.
Colour garner4 g max.
Viscocity dpa s9.5 - 11
Pressured polyethylene three-layer black/white hose (bag) - diameter 2, 7 m. Thickness 240 mkm lenght 60 m - can contain 200 tons of grain or silage outdoors just in fields during two years.
Length - 11.80mtrs.
Dia. - 1.82mtrs.
Wall thickness - 14mm.
Weight - 8mt./pipe.
The Pipes are spiral welded
The pipes external surface is plastic quoted.
The innner surface of the pipe is painted.
It consists of glass plastic material cores or basalt plastic material cores with the diameter from 4 to 40 mm, length up to 12 meters ( it might be rolled in a coils) with the ribbed surface of a spiral shape. The composite armature is intended for applying in concrete structures with the pre-stressed and non-stressed reinforcement instead of using the traditional steel armature.
Steel coil
Steel grade: st. 3ps
2 x 1000 x c û 390 mt
2 x 1250 x c û 130 mt
3 x 1000 x c û 260 mt
3 x 1250 x c û 130 mt
4 x 1000 x c û 130 mt
Total quantity: 1040 mt
