Sawdust and wood chips, wood pellets, appliances. coal. petrolium.
Power hand toos tools, non power hand tools., welding inverter and mma., consumables, cutting and grinding disks, welding electrodes.
Cases for hunting and fishing, cases for optic, cases for photo, video cameras.
Meat processing machines, spare parts for steam engine turbines.
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Our company is a reliable supplier of cable and wire products, our specialists will always help you choose a cable or wire of good, namely the best quality, we work with the most famous and high-quality brands of Ukraine and not only, our company is ready to supply you following listed copper and aluminum cable, as: I. Power cables: NYY; NAYY; NYBY/NYRY; NAYBY/NAYRY; N2XY; N2XH; 2XBY/N2XRY; NA2XBY/NA2XRY; NA2XY. II. Building wire: NYM. III. Flexible cables: H05V-K; H07V-U; H07V-K; H05Z-K; H07Z-K; H07Z-U; H07Z-R; H03VV-F/H05VV-F; H03VH-H; H07RN-F; H01N2-D. IV. Control cables: NYY control cables; YSLY. V. Fire resistant power cable: (N)HXH-J FE180/E30; (N)HXH-J FE180/E90. VI. Bare copper strand: Bare copper strand VII. Overhead line: AsXSn Any volume, certified documentation, product labeling, correct packaging, we can do all this, we are waiting for your applications and look forward to long-term cooperation.
«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Hydraulic turbines.
Steam turbines.
Gas turbines.
Luminaires are used for lighting of: Premises with high safety standards Production and storage premises Mining and refining plants Rail depot Technological transport Luminaires are produced in basic modifications with power varied from 40 to 204 W. Housing of luminaires is made of alluminium. Spreader and optics polycarbonate. Luminaires are anti-vandal. Different types of mounting allow to install luminaires without improvement of the existing mounting attachments.
Luminaires are used for lighting of: ï?² Premises and areas with high explosion hazard (Fuel refiners and storage, gas stations) Luminaires are produced in basic modifications with power varied from 15 to 225 W. Housing of luminaires is made of aluminium or rough-service polycarbonate. Spreader polycarbonate. Luminaires have anti-vandal protection. Voltcontrol system can be installed into luminaires.
We produce embossing rolls for the production of paper napkins, towels, wallpaper, gravure rolls for applying acrylic foam (used in wallpaper production), as well as for embossing other various materials such as foil, metal, leather, wood, mdf, plastic film and others. ). The embossing pattern is agreed with the customer. Possibility of producing these shaft sizes: diameter up to 400 mm length up to 4 meters both according to the drawings of the Customer, and according to your We produce embossing rolls with different patterns and different sizes. "LASER ENGRAVING" - deep engraving (large assortment of drawings). "MECHANICAL" - the method, when transferred to a paper base, makes it "fluffy" and pushes through even the most low-quality base. (the assortment of drawings is not large). "CARDBOARD" (reciprocal) - we make according to any size, we make reconstruction of shafts. Delivery time and price depend on the complexity of the shaft manufacturing.
Wood lumber, sewing machines , recycle car battery , face masks, surgical gloves , surgical gown , electric car chargers.
Our product can be used in food industry/industrial food makers/indusrtial kitchens/etc. We propose high quality product and competitive prices! We use an individual approach, therefore in each case we make a calculation of the cost of production. We are ready to make calculations, samples, and series of orders for you. Let`s improve youre business with us! We will be happy to answer on all your questions! For more information follow: https://alliancesteel.com.ua/en/ https://www.instagram.com/alliance.steel/
LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch. LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output. The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate. A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω). MAIN FEATURES: Portable and lightweight Moistureproof and dustproof case Advanced LiFePO4 internal battery with fast charging option High-contrast graphic OLED display Multifrequency operation Operating frequencies can be changed upon request Internal transmission loop antenna Automatic load impedance matching Ability to work with energized 0.4kV cables (inductive connection) Overload protection Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
LED lamp 'Round Fixture MG FLASH URBAN', model 'M-UR-400-30', white frame with dimensions 400 x 80 mm, 30W, luminous flux 3600 lumens, color temperature 4000 K, LED OSRAM
LED lamp 'Linear Lamp MG LINE', model 'M-LN-1000-40', white frame with dimensions 1000 x 67 x 80 mm, 40W, luminous flux 5400 lumens, color temperature 4000 K, LED OSRAM
