The mill is designed for grinding grains, chaffy, bean, corn, grain mix, oil cake, mill cake and other raw materials, except mineral ones. The mills are installed at the feedstuff plants.
Applications: Designed for the supply of water to industrial plants and communities. They are used also for agricultural land irrigation and drainage.
Capacity, Q = 400 m3/h, Head, H = 105 m, Speed of rotation, 1470 rpm, NPSHr = 4.5 m
The pump units shall be rigidly anchored to the foundation, and piping shall be rigidly connected to the pumps.
The TsN type pumps are centrifugal, horizontal, spiral with horizontal split casing, with transfer channels, two- or four-stage, with single-entry impellers symmetrically arranged on the shaft according to type BB1 or BB3 API 610. The pump rotor is supported by grease-lubricated roller bearings. Shaft seals are gland packing. The pump casing is the main part of the pumps, which consists of the lower and upper half of the casing, connected together by studs.
In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types.
Tempered glass constitutes flat glass, subjected special thermal treatment tempering, in result of witch in glass volume arise naturally distributed internal tensions, witch enlarge mechanical glass strength and provide special (safe) character of its destruction. Increase of mechanical strength (while bend can reach 250 mpa that is five times higher than in usual flat glass) stipulates increase of glass thermal resistance in 3-4 times (since 40 till 180 0c). Flat glass has thermal resistance by 40 0c, tempered glass by 180 0c, that prevents tempered glass from destruction while overheating and temperature difference. It is very important while using in external glass cover by toned and reflex glasses with absorption factor of thermal energy more than 25 %, when glass can get hot till 90 0c.
In europe, lately, is widely spread the use of tempered glass with the purpose of safety, longevity and reliability.
Bent tempered glass almost does not differ from tempered flat glass, the difference becomes apparent only on the final stage of the process. Glass after heating section comes to tempering section, where in a short period of time flat glass bends by the forming rollers. The forming rollers are usually set according to the radii models and forms.
USE:
Structural flat glass cover of buildings façades
Shops and supermarkets windows
Partitions in apartments and offices
Glass doors
Saunas doors (tempered glass stands perfectly heat strokes)
Stairs and parapet fences
Roofs, roof visors
Winter gardens building
Electric and gas ovens doors
Escalators side supporting planes.
Our company can offer:
Tempering of clear float glass, thickness: from 4 till 19 mm
Tempering of toned on the whole glass
Tempering of reflex (sun protective) glass.
Key features of the production line:
The length of production line depends on product range from 4.5m up to 10.0m;
Wide range of products due to replaceable units:
- feeding of liquid fillings
- sprinkling with sugar, poppy seeds, sesame, etc.
- twisting in a roll
- one- and multiple folding
- surface cuts
Equipment set of the line:
- forming table
- calibrator
- cutting unit
- a sprinkler of loose ingredients with a humidifier and pressure roller
- depositor of liquid filling
- folding nodes
- guillotine
Capacity: 100 - 500 kg/h
Energy source: electricity
All components contacting with product are made of stainless steel AISI 304
Drives and components are made in Europe
Control system is carried out with controller and TOUCHSCREEN
Stopper BH140 is a horizontal flexible safety barrier. It is designed to protect walls and equipment. It is manufactured in single- and multi-sectional versions. Made of extra strong plastic polymer. The Stopper evenly distributes the mechanical load over its entire surface, thereby it does not deform. Moreover the barrier maintains the integrity of the floor and vehicles in the event of a collision. It is highly proof against the action of moisture, ultraviolet and temperature difference. It can be used in cold rooms.
Advantages
Protection
The horizontal barrier reliably protects the territory from collision with machinery: walls and equipment will be safe and secure.
Shock absorption
The flexible safety barrier absorbs and dissipates impact energy. It is achieved by means of the use of an extra strong plastic polymer and a construction solution.
Cost reduction
Stopper BH140 will protect property from damage due to careless driving. Thereby you can avoid the expenses on the repair of equipment, forklift and cargo.
Versatility
The barrier is proof against the action of moisture, ultraviolet, heat and cold, therefore it can be used in various premises: industrial, warehouse, cold rooms, etc.
Signal color
It has a bright yellow color, which makes the fencing visible to the driver of the machinery when performing complex maneuvers in a confined space.
Aesthetics
The horizontal barrier has a contemporary design and will be a googdly addition to the interior of your premise.
10 Acupressure Rollers Suppliers
Short on time? Let Acupressure Rollers sellers contact you.
