Sandwich panels are composite materials produced of two dyed Galvanized or Aluminum corrugated plates filled (with PIR, PUR, Rock wool) for thermal insulation. Used as coating materials in the roof, wall and internal partition or cold rooms of the buildings, sandwich panels provide a quite high level of thermal, water, sound insulation; prevent moisture condensation. In addition, they are distinguished with their bearing capacity as well. Bearing capacity of the sandwich panel depends on the density, thickness of its filling material and the form of its metal surfaces. Sandwich panel is an economical solution when assessed within the context of cost-benefit analysis. Thickness of the metals (DGS, Aluminum) and filling materials is determined in accordance with the area of usage and the amount of load they will bear. The climate conditions of the region of usage should be taken into account while determining the thickness of the filling material. Sandwich panels set the outer shell of the buildings in an aesthetic and affordable way by providing thermal, water and sound insulation without the need for any coating such as plaster or dye. They are procured with the best prices and used in the buildings whose load-bearing system is of steel and prefabricated concrete, such as industrial buildings, military buildings, social buildings, agricultural buildings, sports facilities, construction sites, silos, hypermarkets, shopping malls, cold storage depots and marketplaces. The products to meet the requirements of any kind of architectural project are produced with aluminum or dyed galvanized sheet metals, in requested amounts and dimensions at Starmet.
High Quality Drywall Access Panel - Aluminium Frame - Different sizes from 20x20, 30x30, 40x40 until 60x120cm - Alternative Gypsum Board (White, Green, Red) available - Private Label is available
Product Code: BEO Panels Cold Room Panels BEO Cold Storage panels are manufactured and prefabricated in the locked features. 42 kg / m3 density polyurethane injection. In length from 2 m to 12 m, 80, 100, 120, 150, are manufactured in 200mm thickness. Cold Room Panels at standard 115cm standard cold room sandwich panels are manufactured to be locked. Cold Room Panels , produced as interlaced unlocked. Cold Room Panels to our good antibacterial and hygienic. BEO produced by Cold Room Panels , as well as the superior quality and long life is not easy, it can be done quickly and properly fitting is designed in nature. Cold Room Panel during the assembly will be required is predesigned All accessories and details, inner and outer surfaces, optionally, polyester coated galvanized steel (GBS) or stainless steel (lnox) are produced. and giving strength to the hair to form roll former machine used is increased and smoothness. Cold Room Panel General Features Panel Width (cm) 30-40 - 50-115 Panel Thickness (mm) 50-60 - 80-100 - 120-150 - 180-200 Panel Density 40 ± 2 kg / m Metal Plating Species Polyester - PVC - CrNi Color RAL 9002 Pattern Corrugated - Straight Insulation Polyurethane Thickness (mm) 0,50 mm
Cold storage lock panel floor Floor panels; The inner surface of 12 mm thick, surface layers of the original birch, non-slip, moisture-repellent, hygienic and practical, easy to maintain, the upper side is dark brown, hexagonal patterned 240 gr / m2 density phenolic resin laminated plywood outer surface is 0.50 mm thick hot-dip galvanized steel sheets IR.
We are manufacturers of SIP structures and wooden beams. We create innovative and reliable solutions for home construction. Committed to ensuring the success of your projects, we offer various solutions for building construction. SHELLBAU SIP panels are innovative NEW GENERATION structural insulation panels made from cement bonded particle board or OSB4.ð??¡ Insulation material polystyrene foam, gray-colored polystyrene foam with improved thermal insulation properties enhanced by the addition of graphite to the raw polystyrene, or dense wool. ð??¡ SIP panels are suitable for all constructions - walls, floors, and roofs. Additionally, we specialize in the production of wooden double joists, which are used for connecting SIP panels and constructing roofs. Entrust us with your project and get reliable, efficient, and long-lasting SIP home solutions! SHELLBAU benefits : â??Standart SIP panels: Panel width 1250mm â??ShellBau: Panels width 600mm ShellBau lightens the weight of the panels, making them easier to install. The frame is assembled twice as densely, providing additional strength. The same construction is used for same the floor, walls, and roof. â??Standart SIP panels: OSB 3 boards are used â??ShellBau: Cement particle board or OSB 4 board are used Cement particle board is thicker, stronger, and more resistant to fire and water. If comparing OSB 3 with OSB 4, OSB 4 is additionally coated, making it more water-resistant. However, cement particle board is more durable than OSB 4. â??Standart SIP panels: Wooden battens are used for connections â??ShellBau: I joist (I-beams) are used for connections. I joist (I-beams) are lighter, more reliable, and less prone to deformation compared to wooden battens. Standard SIP homes are typically built 1-2 floors high, but with the ShellBau system, buildings of up to 8 floors can be constructed. We kindly invite you to consider becoming a ShellBau representitive in your country.
We produce PVC Sandwich Panel in . We are a manufacturer firm. Price is representative. If you want to buy products in wholesale, please contact us. If you want to examine our products
Made in Turkey wall panels. We can make any design and any size
We are able to design and manufacture the various categories of steel products in any quantity with any design, purpose, size, color and special feature such as generator canopies (chassis and cabins), containers, different parts of industrial machines, pump canopies, air conditioning cabinets . You can check our catalog via our website :
Plasters providing heat, sound and fire insulation
- Cement-based, high performance, elastic thin plaster mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. SCOPE OF APPLICATION - On rough plaster indoors and outdoors in buildings - As a finishing coat on exposed concrete - Plastering of thermal insulation boards in jacketing thermal insulation systems - It is used to repair fine cracks and gaps on old plaster or concrete surfaces.
EPS(expanded polystyrene) foam is among the largest commodity polymer. EPS is consisted of closed cells which are glued together. It is rigid and tough and has good thermal insulation and damping property. EPS Expanded Polystyrene Insulation 2400mm x 1200mm x 30mm/150mm/175mm/200mm
We can supply any need of electric panels. We just need your drawing.
Driving Force: 8 Joule Impact Voltage: 35.000 V 12V 7A Battery Operated With its solar energy feature it charges its own battery. Usage areas - In the field of farming, against the bear -Puters, in certain areas Animal grazing, - In the nurseries against Bear and Pigs, - Against the Pig in the Corn and Sunflower Fields, - Pigs and bears for cultivated crops, The Bear, Pig and DRIVING 100% FINAL SOLUTION. EARS FOR YOU, YOU'RE TIME ... !!! Usually, you can use this product, which is used by our friends, for many purposes. In herd, you can use your animals to spread in the regions you want and grind with grazing. Your time is up to you. Pest control in the cornfield, In the fight against the bear in the nurseries, It is the Definitive and Most Effective Solution. It's cola in the field, in the fields, in the night, in the garden, There's no need to keep watch over the bee hives. % 100 Trust 100% Customer Satisfaction We will be with you with our 24/7 continuous support.
DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance. Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials. 1. THERMAL INSULATION â?¢ When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun itions. crease in nc d insulation ise when applied to walls. s crucial like hospitals, hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTIONâ?¢ This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space. THICKHNES: 1 mm WIDTH: 4 mm We can be produced in any length up to 6 meters
DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance. Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials. 1. THERMAL INSULATION When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun itions. crease in nc d insulation ise when applied to walls. s crucial like hospitals, hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTION This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space. SIZES: THICKNESS : 3 mm WIDTH : 40 mm We can be produced in any length up to 6 meters
Metal Clad Switchgears SETAS Metal Clad Switchgears are switching and control cubicles manufactured between 1 kV 40.5 kV comply with IEC 62271-200 standards. SMC series Metal Clad Switchgears are defined with following features according to IEC 62271-200 standards. 3mm sheet steels LSC 2B class Loss of Service Continuity Pm Partition Class AFLR Internal Arc Classification 4 earthed accessible compartments Maximum personnel safety with 31.5 kA/ 1 s internal arc test. Safety electrical and mechanical Interlocking systems. Withdrawable type Vacuum / SF6 Circuit Breaker for fast and easy servicing General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lightening Impulse withstand Voltage : 40185 kV Rated Frequency : 50/60 Hz Rated Current ( natural ventilation ) : 6303150 A Short Circuit withstand Current : 1631.5 kA ( 3 s ) Internal Arc withstand Current : 1631.5 kA ( 1 s ).
SME series Metal Enclosed Switchgears are defined with followwing features 2 mm sheet steel LSC 2A Loss of Service Continuity Pl Partition Class AFL Internal Arc Classification 3 earted accessible compartmments Maximum personel safety with up to 25 kA / 1s internal arc test Safety electrical and mechanical Interlocking systems SF6 gas insulated Circuit Breaker allows fast and easy servicing Grounding systems with ensured continuity. General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lighting Impulse withstand Voltage : 40185 kV Rated Frequency : 50 / 60 Hz Rated Current : 6301250 A Short time withstand current : 16/20/25 kA ( 1 sec ) Internal Arc withstand Current: 16/20/25 kA ( 1 sec ).
Profiles... Plastic profiles.
Aluminium Composite Panels, we have B1, B2 and A2 classes of production and have also been certified by SGS. Also our ACP coatings are under guarantee of HYDO as we use Hyro coated Aluminium Sheets on our products.
Aluminium Composite Panels, we have B1, B2 and A2 classes of production and have also been certified by SGS. Also our ACP coatings are under guarantee of HYDO as we use Hyro coated Aluminium Sheets on our products.
