Body / Housing: DKP Sheet Metal Body Sensor Type : Motion Light Source : SMD LED Color Temperature : 3000 K / 4000 K / 6500 K CRI >80 IP Value : IP 20 Installation: Surface Mounted POWER: 18W LUMINOUS FLUX(lm) : 2.000 COLOR TEMPERATURE (K) : 3.000/ 4.000 / 6.500 DIMENSIONS : 290*290*50,5 mm BEAM ANGLE : 360° DETECTION RANGE : 9 m INSTALL HEIGHT : 2.8 m SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min
Body / Housing: DKP Sheet Metal Body Sensor Type : Motion Light Source : SMD LED Color Temperature : 3000 K / 4000 K / 6500 K CRI >80 IP Value : IP 20 Installation: Surface Mounted POWER: 18W LUMINOUS FLUX(lm) : 2.000 DIMENSIONS : 290*290*50,5 mm BEAM ANGLE : 360° DETECTION RANGE : 9 m INSTALL HEIGHT : 2.8 m SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min .Emergency Light Time : 3 Hours
Body / Housing: DKP Sheet Metal Body . Optic: Glass / Polycarbonate /Opal Diffuser . Sensor Type : Motion. Light Source : E27 .IP Value : IP 20. Installation: Surface Mounted DIMENSIONS : 290*290*90,8 mm .BEAM ANGLE : 360° .DETECTION RANGE : 9 m. INSTALL HEIGHT : 2.8 m. SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min. Emergency Time : 3 Hours
Body / Housing: DKP Sheet Metal Body .Sensor Type : Motion Light Source : E27 (25W*2 Max.) IP Value : IP 20 Installation: Surface Mounted DIMENSIONS : 290*290*90,8 mm BEAM ANGLE : 360° DETECTION RANGE : 9 m INSTALL HEIGHT : 2.8 m SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min
High Quality H07V-U (NYA) Copper Conductor PVC Insulated Electrical Cable EN 50525-2-31 Wholesale Product
Ref. No: F10115 Material: Stainless Steel Acc.to NFC-17 102 T:60s Weight = 1,50 kg Height = 50 cm
Ref. No: F10120 Material: Stainless Steel Acc.to NFC-17 102 T:30s Weight = 1,38 kg Height = 50 cm
Bus and Truck spare parts are supplied original or aftermarket quality. Products are directly from OEM or official dealers. We supply Mercedes, MAN, TEMSA, Otokar, BMC or Karsan spare parts original or aftermarket. We have connections with manufacturers of replacement parts as well. Setra, Neoplan, Tourliner, Travego, Tourismo, Atego, Actros, Axor spare parts parts all in our product range.
Yass erkek terminaller
POLYMER INSULATOR EXTERNAL TYPE MEDIUM VOLTAGE SEPARATORS Polymer Insulator External type medium voltage separators are manufactured with fuse and grounded with fuse. They are designed for working at medium voltage networks up to 36 kV. They are manufactured according to TSE standards and TEDAÅ? Specifications. Separators are three phased and they can be manufactured as double poled monophase upon request. Separators are used for separating transmission lines in order to perform repair and revision works at certain parts of medium voltage networks. Therefore separated line can be seen easily. Separation mechanism can be delivered as manual controlled or drive controlled.
We can supply lots of kind switgear equipments with best quality.
Metal Clad Switchgears SETAS Metal Clad Switchgears are switching and control cubicles manufactured between 1 kV 40.5 kV comply with IEC 62271-200 standards. SMC series Metal Clad Switchgears are defined with following features according to IEC 62271-200 standards. 3mm sheet steels LSC 2B class Loss of Service Continuity Pm Partition Class AFLR Internal Arc Classification 4 earthed accessible compartments Maximum personnel safety with 31.5 kA/ 1 s internal arc test. Safety electrical and mechanical Interlocking systems. Withdrawable type Vacuum / SF6 Circuit Breaker for fast and easy servicing General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lightening Impulse withstand Voltage : 40185 kV Rated Frequency : 50/60 Hz Rated Current ( natural ventilation ) : 6303150 A Short Circuit withstand Current : 1631.5 kA ( 3 s ) Internal Arc withstand Current : 1631.5 kA ( 1 s ).
SME series Metal Enclosed Switchgears are defined with followwing features 2 mm sheet steel LSC 2A Loss of Service Continuity Pl Partition Class AFL Internal Arc Classification 3 earted accessible compartmments Maximum personel safety with up to 25 kA / 1s internal arc test Safety electrical and mechanical Interlocking systems SF6 gas insulated Circuit Breaker allows fast and easy servicing Grounding systems with ensured continuity. General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lighting Impulse withstand Voltage : 40185 kV Rated Frequency : 50 / 60 Hz Rated Current : 6301250 A Short time withstand current : 16/20/25 kA ( 1 sec ) Internal Arc withstand Current: 16/20/25 kA ( 1 sec ).
16a 250v Body :vo polyamide Rocker : polycarbonate Terminals: cuzn30 ms70 Contacts:silver contacts Kema_keur , enec05 , rohs
General use sockets Use in : general Origin : turkey Brand : krg All of the krg products are manufactured sourcing original sample by using converse engineering and cad/cam methods and strictly tested through our high-tech quality control laboratory. Unit weights : 2kg/each
The behavior of the LDRB isolators is highly linear in shear stiffness and the damping ratio is 2 - 3% of critical damping. There is no creep in the material and the stability of the modulus of elasticity is very good. Advantages of LRDB insulators; they can be modulated in a simpleway and they are less affected by the factors that have mechanical behaviors. These insulators may need additional damping elements.
Nimrof TARZ27S Electronic Fault Locator is designed to complement conventional test instruments in the debug and troubleshooting process. Nimrof TARZ27S is suited for todays varied signal circuit cards where Analog and Digital are mixed together. It provides to find faulty component on the electronic board in a short time by using power-off test method. Nimrof TARZ27S Component Tester allows more than 100 various voltage combinations, it operates by applying a low current AC signal to two points of electronic equipment. The current flow appear a vertical signature deflection, while the applied voltage appear a horizontal deflection. Together they form a unique V/A signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.
Ballast model wattage Main current power factweightdimension Flb18 18 w 0, 37 a 0, 48 0, 4 k151 x 42 x 28 mm Flb20 20 w 0, 37 a 0, 48 0, 4 k151 x 42 x 28 mm Flb36 36 w 0, 43 a 0, 47 0, 4 k151 x 42 x 28 mm Flb40 40 w 0, 42 a 0, 47 0, 4 k151 x 42 x 28 mm Flb58 58 w 0, 67 a 0, 50 0, 4 k151 x 42 x 28 mm Flb65 65 w 0.67 a 0, 47 0, 8 k155 x 41 x 32 mm Advantages High efficacy factor Low operating cost Less heating Doesnt cause glaring Various white color options Suitable for high intensity light Applications Residentä°al lighting Commercial lighting Household environments Indoor-outdoor lighting Extreme conditions (such as freezers) Technical features Wire type : enameled copper Body material : nylon 66/nylon 6 fireproof material (with fiber glass) for carcass. Siliceous sheet on body parts Standards : ts en 61347-2-8 Average lifetime : tw marking 105â?� (average lifetime of 10 years continuous operation @ 105â?�) Other specifications High quality screw-in or insert terminal blocks as standard Quick and easy wiring Long lifetime Silent working Our company addresses; Head office Soganlik yeni mah. Ataturk cad. No: 6/1 else apt. Daire: 9 (kat: 8), 34880 Kartal / istanbul Factory Kucuk sanayi sitesi 25. Cadde no: 77/a Corum-turkey
COMPOSITE SILICONE SUSPENSION AND TENSION ISOLATORS ELOPAR-branded composite silicone isolators are made from silicone rubber material. Metal bonding elements of isolator is made from forged steel material. Isolator core is made of reinforced fibreglass. It is ECR type and free of boron. Silicone thickness on the isolator core is above 3 mm and silicone thickness on the metal caps is above 5 mm. Manufactured according to IEC 61109 and IEC 62217 standards, ELOPAR-branded composite silicone isolators comply with TEDAÅ?-MYD/2009-055 specifications. All tests for isolators were conducted at EGU-HV Laboratory a.s/Czech Republic, and isolators passed all tests successfully. Advantages: - Resistant to impacts. - Provides high electrical values. - Resistant to extremely hot or cold weather and ultraviolet rays of sun. - No risk of cracking or fraction. - Water repellent. - Easy to assembly, mount and transport thanks to its light weight. - Long-lasting, free of maintenance.
It manufactures electrical panels in the electricity distribution and transmission sector with its competent engineering staff with over 20 years of experience in the fields of power systems, automation, communication and electrotechnics.