We are manufacturers of SIP structures and wooden beams. We create innovative and reliable solutions for home construction. Committed to ensuring the success of your projects, we offer various solutions for building construction. SHELLBAU SIP panels are innovative NEW GENERATION structural insulation panels made from cement bonded particle board or OSB4.ð??¡ Insulation material polystyrene foam, gray-colored polystyrene foam with improved thermal insulation properties enhanced by the addition of graphite to the raw polystyrene, or dense wool. ð??¡ SIP panels are suitable for all constructions - walls, floors, and roofs. Additionally, we specialize in the production of wooden double joists, which are used for connecting SIP panels and constructing roofs. Entrust us with your project and get reliable, efficient, and long-lasting SIP home solutions! SHELLBAU benefits : â??Standart SIP panels: Panel width 1250mm â??ShellBau: Panels width 600mm ShellBau lightens the weight of the panels, making them easier to install. The frame is assembled twice as densely, providing additional strength. The same construction is used for same the floor, walls, and roof. â??Standart SIP panels: OSB 3 boards are used â??ShellBau: Cement particle board or OSB 4 board are used Cement particle board is thicker, stronger, and more resistant to fire and water. If comparing OSB 3 with OSB 4, OSB 4 is additionally coated, making it more water-resistant. However, cement particle board is more durable than OSB 4. â??Standart SIP panels: Wooden battens are used for connections â??ShellBau: I joist (I-beams) are used for connections. I joist (I-beams) are lighter, more reliable, and less prone to deformation compared to wooden battens. Standard SIP homes are typically built 1-2 floors high, but with the ShellBau system, buildings of up to 8 floors can be constructed. We kindly invite you to consider becoming a ShellBau representitive in your country.
200x400mm to 400x1200mm Thickness: 18mm-25mm-30mm All of our products are fired in 1180 celcius degrees and manufacturing as a firebricks
In the corner joints of the corner panel, the panels are locked to each other and the thermal bridge that is tried to be created is not broken and it is ensured to be mounted easily. It provides locked column turns with the reverse corner panel, and all kinds of column turns can be locked with the Z panel. It has 6-8-10-12-15 -18 and 20 cm thickness chrome, PVC, galvanized, polyester painted, corrugated or grooved products with desired dimensions up to 12 meters in length, with lock and unlock options.
Our facade panels provide heat, water, sound insulation and fire safety in order to meet the needs of the industry sector. With its economical, aesthetic and high quality, it safely protects the building from external atmospheric conditions. It is produced in hidden screw and externally screwed forms. Galvanized sheet and Aluminum sheet are used in different form options. The insulation materials used in the panel are Polyurethane (PUR), Polyisocyanate (PIR) and Rockwool. Recently, social and industrial buildings, factories and warehouses, shopping malls, etc. It is used as exterior coating materials of many buildings such as facade, interior partition or cold air rooms.
Our roof panels with stone wool, polyurethane and EPS insulation alternatives provide maximum heat, sound and water insulation. Sandwich panels come to the forefront in architectural preferences with their fast production and assembly possibilities, high bearing capacity and lightweight construction as well as high insulation properties.With the ease of assembly, time is saved in labor.
These are the products that provide the combination of the structure used in panel mounting and an aesthetic appearance at the corner joints. It provides a hygienic environment for the assembly of floor, wall and ceiling panels to each other and in the conditioned area created.It can be produced as Hygienic or Chrome, PVC, Polyester coated Galvanized Profile. Our products: Cornered inner-outer profiles - Corner connectors - Flat and Z profiles - U profiles for panel positioning - Ceiling hanger profiles and apparatus - Aluminum brackets
They do not need any other carrier structure and they are sandwich panels that will keep the cold storage storaged and carry both insulation and the weight of the structure. It has 6-8-10-12-15-18 and 20 cm thick chrome, PVC, galvanized, polyester painted, corrugated or grooved products with locked and unlocked options. All of our panels are in female-male form and the products with lock system ensure that the structures of the panels can be mounted / disassembled without deterioration. This provides the possibility to add or remove panels whenever desired and strengthens the structure of the panels. Our panels are CE certified, 42 kg / m³ polyurethane filled, with prefabricated features.
Our cold storage floor panels are generally preferred in small rooms or in cold rooms where the floor insulation application of the building is not suitable. With its locked and modular structure, the cold air chamber can be easily disassembled and moved to its new location. 6-8-10-12-15-18 and 20 cm thickness of our floor panels; The lower surface is made of polyester painted galvanized sheet, the upper surface is made of 90 mm thick hexagon non-slip (water resistant) polyurethane product. Depending on the needs of the project, it is also produced as polyester painted, chrome or PVC, the top surface of which is galvanized.
SANDWICH PANEL COMPATIBLE ROOF WINDOWS our covers are made of DKP(Galvanized)sheet. From to/outer side is 112 cm*90cm,outlet throat size is 45cm*60cm. Our top covers are tempered safety glass. Our covers provide 1 step ventilation and open 110 degrees,locked from inside. Our covers are shock absorber. We can produce our covers as top opening-closing as well,in accordance witl your request. Weight: 10 KG
PUR & PIR &rockwool insulated sandwich panel for roof and wall cladding
- Modular Cold Air Warehouses - Packed Type Modular Cold Air Warehouse and Panels - Cold Room Panels - Cold Room Doors and Accessories - Cold Room Stow Shelves - Cold Room Devices to the Food and Medicament Industry.
16-1220-2800mm 18-1220-2800mm Panels high gloss mdf
Slatpanel Vinyl Slatwall For The Decoration Of Shops And Garage * Newest extrusion and coating production technology * Compatible with standard roof and a large variety of hooks, shelves, baskets and specialty accessories. * Max. weight to be carried by slatpanel is 10 kg. for instance, in usage of 400 mm. 5 hook sloping arm. * Very light, does not add any additional load to the wall and can be easily handled and stored on the site. Specifications: * Made of heavy duty cellular PVC, Lead Free * ENVIRONMENT FRENDLY AND RECYCLED * With its impermeable skin it is unaffected by moisture, * Any fading or change in colors, no problems like pinking, rotting, rusting, etc. * B1 Class (DIN 4102-1) fire rating, does not burn by itself and extinguishes immediately when the flame source is removed * Is not effected by liquids in common use and resistant to most acids and alkalis, does not support any fungal and bacterial growth * Strong and durable, scratch resists Application Details: * As recommended, Slatpanels can be affixed directly to the galvanized c profiles in the construction area. * Masonry walls should first be framed with galvanized c profiles. It will be necessary to locate and mark the vertical position of the galvanized c profiles prior to installation. * Galvanized c profiles are fixed to the masonry with 6* 80 mm. coarse thread screw. We recommend at least 400 mm centre space between two galvanized c profiles. * The starting, bottom, inside out side corners and H type of trims are fixed accordingly, * If the slatpanel needs to be cut to size - cut the panels face down with a circular saw. Use a sharp blade with at least 60-80 teeth. * Slatpanels can be screwed directly with 3,9* 16 mm. drill bited screw into the newly installed galvanized c profiles starting from top to bottom for the completion of the work. * CEBECI's PVC Slatpanel systems are quick and easy to install and are ideal for exhibit displays. * It is at least 5 times lighter than most conventional MDF slatwall exhibit systems and can easily be handled by one person, so there is no need for expensive fork lift installations.
Foam Panel Think twice it is your home! * Cellular PVC-ue (Unplasticised expanded cellular polyvinyl chloride) foam * Co-extruded with rigid acrylic skin * Does not suffer from the discoloration problems due to the LEAD FREE formulation * Very long life span, when eventually replaced can be fully recycled * Dirt resistant and self clean with rain Specifications: Acrylic Skin does not fade * Thermal & acoustic self - insulated * No discolouration weatherable * Easy to clean no maintenance Chemical Stability * Fire retardance self extinguishing * Not effected by liquids * No bacteriological development Long last strong durable * Strenght wind loading * Easy to work with * Adding value
* Due to its hollowed form of profile and 9 mm thickness, the lambda (The coefficient of heat conductivity) value is far superior to other materials used in the internal wall insulation and it is great alternative to traditional tiling * Reduces condensation and is excellent where hygiene is important * It is highly recommended for the walls and ceiling of any room in house, office, factory, school and food industry. * Suitable for bath rooms and shower cubicles and steam rooms up to 60 ¦C. * The impermeable skin of Wall Panel is unaffected by moisture, Specifications: * Cellular PVC based, Lead-Free * Very light, it does not give any additional load to the wall * Easy to clean, no maintenance required * Does not effected by liquids in common use and resistant to most acids and alkalis, does not support any fungal and bacterial growth. * With its impermeable skin it is unaffected by moisture, Any fading or change in colors, no problems like rotting, rusting, etc. * B1 Class (DIN 4102-1) fire rating, does not burn by itself and extinguishes immediately when the flame source is removed * Strong and durable, scratch resists Where Lambries can be fitted Cebeci internal decorative panels are used in * Ceilings / walls, internal decoration, internal separations, Roof Soffits * Prefabricated buildings, Garages, Caravans, Worksite Buildings etc.
Master panel wall Net Coverage Width: 850mm. Thickness: 45mm. / 60mm.
Sandwich panels are composite materials produced of two dyed Galvanized or Aluminum corrugated plates filled (with PIR, PUR, Rock wool) for thermal insulation. Used as coating materials in the roof, wall and internal partition or cold rooms of the buildings, sandwich panels provide a quite high level of thermal, water, sound insulation; prevent moisture condensation. In addition, they are distinguished with their bearing capacity as well. Bearing capacity of the sandwich panel depends on the density, thickness of its filling material and the form of its metal surfaces. Sandwich panel is an economical solution when assessed within the context of cost-benefit analysis. Thickness of the metals (DGS, Aluminum) and filling materials is determined in accordance with the area of usage and the amount of load they will bear. The climate conditions of the region of usage should be taken into account while determining the thickness of the filling material. Sandwich panels set the outer shell of the buildings in an aesthetic and affordable way by providing thermal, water and sound insulation without the need for any coating such as plaster or dye. They are procured with the best prices and used in the buildings whose load-bearing system is of steel and prefabricated concrete, such as industrial buildings, military buildings, social buildings, agricultural buildings, sports facilities, construction sites, silos, hypermarkets, shopping malls, cold storage depots and marketplaces. The products to meet the requirements of any kind of architectural project are produced with aluminum or dyed galvanized sheet metals, in requested amounts and dimensions at Starmet.
High Quality Drywall Access Panel - Aluminium Frame - Different sizes from 20x20, 30x30, 40x40 until 60x120cm - Alternative Gypsum Board (White, Green, Red) available - Private Label is available
Product Code: BEO Panels Cold Room Panels BEO Cold Storage panels are manufactured and prefabricated in the locked features. 42 kg / m3 density polyurethane injection. In length from 2 m to 12 m, 80, 100, 120, 150, are manufactured in 200mm thickness. Cold Room Panels at standard 115cm standard cold room sandwich panels are manufactured to be locked. Cold Room Panels , produced as interlaced unlocked. Cold Room Panels to our good antibacterial and hygienic. BEO produced by Cold Room Panels , as well as the superior quality and long life is not easy, it can be done quickly and properly fitting is designed in nature. Cold Room Panel during the assembly will be required is predesigned All accessories and details, inner and outer surfaces, optionally, polyester coated galvanized steel (GBS) or stainless steel (lnox) are produced. and giving strength to the hair to form roll former machine used is increased and smoothness. Cold Room Panel General Features Panel Width (cm) 30-40 - 50-115 Panel Thickness (mm) 50-60 - 80-100 - 120-150 - 180-200 Panel Density 40 ± 2 kg / m Metal Plating Species Polyester - PVC - CrNi Color RAL 9002 Pattern Corrugated - Straight Insulation Polyurethane Thickness (mm) 0,50 mm
Cold storage lock panel floor Floor panels; The inner surface of 12 mm thick, surface layers of the original birch, non-slip, moisture-repellent, hygienic and practical, easy to maintain, the upper side is dark brown, hexagonal patterned 240 gr / m2 density phenolic resin laminated plywood outer surface is 0.50 mm thick hot-dip galvanized steel sheets IR.