Turkish Nylon Mesh Suppliers and Manufacturers

Nylon bag Min: 1 tone(1.000 kg.)

It is used for carrying the retail products sold at the markets by the consumer. The market bag produced by high density polyethylene is also known as

Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan Nylon + Elastan

100% cotton yarn from 16ne to 100 ne Nylon 6 texturized yarn 40 to 70 deniers raw white and extruder black. Pallets

wire mesh

Nylon.

The price will be determined according to the order amount and the order date. We have 2 factories in Turkey and in Canada. We will ship the products according to the region.

wire mesh cable trays H=1-300mm wire mesh T and L bends covers

Reinforced mesh is a kind of general purpose metal constructions used for reinforcement of construction projects, protection against mechanical damage and to ensure long term and trouble-free building operation. Reinforcing mesh is made of class AI and AII rebars and low carbon indented steel wire. can be made in any size you want.

Visit our website and contact us for further information. 1 x 40' container

Brief Introduction of Wire Mesh Cable Tray Systems: These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits. Features and Benefits of Wire Mesh Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes 9. Heights Shown are Internal Dimensions Manufacturing: Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP) Mode: Top curved / Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional Suggestions: 1). MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. 2). SURFACE FINISH: A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free. B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays. Specification for power and communications cabling containment. 1). SCOPE Steel Wire Cable Tray conforming to the material and performance of this specification. 2). GENERAL A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. B). Surface Treatments: i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2) ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729. iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L) C). Steel Wire Cable Tray Widths & Depths i). Cable Tray dimensions are all internal. ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm. iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm All trays are of 3005mm long 3). SPECIFICATION a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -: 4 mm for trays of widths up to 150mm 4.5 mm for trays of widths of 200mm 5.0 mm for trays of widths of 300mm 6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050) c). Trays will be constructed with a 50mm x 100mm mesh configuration. d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray. e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray. f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld. 4. TESTS, CERTIFICATION AND CONFORMITY a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537. b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification. c). Fire test certification should be published in accordance with the E30/E90 standard. d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result. We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays. PSC

Reinforced mesh is a kind of general purpose metal constructions used for reinforcement of construction projects, protection against mechanical damage and to ensure long-term and trouble-free building operation. ... Reinforcing mesh is made of class AI and AIII rebars and low-carbon indented steel wire.can be made in any size you want.

All size types are needed to be evaluated by the production and quality teams.

BARD 3DMAX MESH 0115310 BARD 3DMAX MESH 0115311 BARD 3DMAX MESH 0115320 BARD 3DMAX MESH 0115321

BARD MESH PERFIX PLUG 0112770 BARD MESH PERFIX PLUG 0112780

Nylon bag.

Polyester, nylon.

Free vibrating screens are produced with 1,2,3,4 layers in every theoretically possible dimension. They are used to separate the broken material inside the plant. The capacity of the screen can vary depending on the size of the desired product. Free vibrating screens operate an average of 7 mm in width. Gradation and moisture of the material, which will be eliminated plays an important role in the capacity of the screen. Vibration-resistant ball bearings and eccentric shaft which is placed on the screen body are driven with eccentric weights at the both end of the shaft. There are ellipsoid vibration in the front and rear parts of the screen and a circular vibration in the middle parts of the screen. Vibrating body sits on the main frame through a sufficient number of heavy-duty helical springs.

BARD MESH FLAT AND PRESHAPE 0113710