Burak Galvaniz is a family company with a 30 years old history and is one of the leading companies in a metal sector. We produce various kinds of steel profiles for walls and ceilings (suspended,gypsum board); profiles of U,C,M, omega types,studs, steel angles, perforated corners, door and windows profiles. We pay great attention to the quality of the product itself and the quality of the its raw materials. We have all the needed certificates that confirm our quality.
Material Stainless steel Length 80 cm Diameter 16 cm Weight 3.60 kg Operating temperature -25C / 90C Standart NFC 17-102 / 2011 Max. Current Strength 200 kA Time to catch 71 µs
Material Stainless steel Length 51 cm Diameter 16 cm Weight 3 kg Operating temperature -25C / 90C Standart NFC 17-102 / 2011 Max. Current Strength 200 kA Time to catch 63 µs
is a black high density polyethylene copolymer designed for the extrusion of pipes. Turkmenistan orgin
Cold Rolled Coils and Slits, prime and second choice
Galvanised Coils and Slits prime and second choice
Galvanized sheets please email me for price
Handmade Wicker bookshelf, towel shelf, kitchen shelf. All natural and very decorative 3 tiered or 4 tiered shelves.
COLOUR COATED PRODUCTS Colour coating of coils means continuous applying of paint to flat steel strip (rolled in a coil shape) with polyurethane rolls using high-tech automation. Colour coated strip is continuously produced on the line as described in the below steps. Coils are opened, top and back surfaces of the strip are cleaned (by applying a special chemical agent and rinsing it off), chromated (an operation to increase the corrosion resistance and to enhance the paint adherence). After that the strip passes through the oven, and the primer is applied to it (paint is applied only to top surface, while back surface is covered with high adhesive polyurethane back coating paint). Thereafter, the strip passes through another oven. If colour coating is requested over the primer on both sides, the paint is applied as the last layer and the strip is dried in the furnace. Depending on the customers request, protecting film may be applied, and the colour coated strip is rolled in a coil and packed.
Having passed Hot Strip Mill and Continuous Pickling Line, after rolling on Cold Reversing Mill (CRM), full hard products with surface quality and thickness (0.25-2.00 mm) suitable for further processing on HDGL are produced. Zinc coating is applied by continuous annealing followed by immerging of the strip into zinc pot on Hot Dip Galvanizing Line (HDGL) To protect the surface of galvanized products from corrosion, chemical passivation and protective oil may be applied. Products with thickness ranging between 0.25-3.00 mm and width ranging between 800-1530 mm may be produced on Hot Dip Galvanizing Line.
NATURAL ALUMINYUM PLAIN COILS AND STRIPS DIMENSIONS Alloy : 1XXX, 3003, 3005, 3103, 3105, 5005, 8XXX Temper : H0, H1X, H2X, H3X, DDQ Thicknes : 0,20mm - 3,00mm Width : 500mm - 2200mm PAINTED ALUMINYUM DIMENSIONS Paint Type : Polyester, PVDF Colours : Ral Colours Alloy : 1XXX, 3003, 3005, 3103, 3105 Temper : H1X, H2X, H3X Thicknes : 0,30mm - 1,00mm Width : 300mm - 1500mm
With Starmet corrugated sheets, thanks to their property of giving radius (curve) shape, it is possible to apply coating with application in place of a thermal insulation layer between two layers of corrugated sheets at the vaulted roofs with aesthetic appearance. Another area where the single layer corrugated sheets are used are the terrace roofs. In such applications, there is water insulation with membrane at the upper part of the roof. Starmet Yapı , in order to meet such needs of the sector in conformity with the values of the project provided by the customers, performs production according to the vaulted roofs, in the computer-controlled bending machine with an affordable price and high quality. Form 27/200 corrugated sheet, form 38/151 corrugated sheet, form 18/838 corrugated sheet, form 52/1000 DECK corrugated sheet, fand form 75/215 corrugated sheet are produced. It gives the advantage of easy and fast assembly on roof and wall, saving on the bearing construction thanks to its lightness, does not take a big place in construction sites and warehouses, is environment friendly due to its recycling feature. Areas of application; It offers safe and affordable solutions of high quality in the buildings whose load-bearing system is of steel and prefabricated concrete, such as industrial buildings, military buildings, social buildings, agricultural buildings, sports facilities, construction sites, silos, hypermarkets, shopping malls and marketplace buildings.
Our titanium cutting wires; It is suitable for use in hand cutting tools, CNC cutting machines and block cutting machines from all manufacturers worldwide. Titanium Cutting Wire; The basis of the wires suitable for hot cutting used in EPS and similar foam cutting are titanium alloy wires that have been strengthened with special alloys and made suitable for hot cutting as a result of long trials and experiences. In order to cut the desired speed and quality, the wire produced with suitable alloys must be passed through a series of processes. In these processes, it increases the breaking resistance of the wire. Advantages of Our Cutting Wire; Makes fast cutting The surface of the material comes out clean Works for a long time without breaking Wire can be stretched as desired It does not elongate as it gets hot. Our cutting wires; It is suitable for use in hand cutting tools, CNC cutting machines and block cutting machines from all manufacturers worldwide. Titanium Cutting Wire; The basis of the wires suitable for hot cutting used in EPS and similar foam cutting are titanium alloy wires that have been strengthened with special alloys and made suitable for hot cutting as a result of long trials and experiences. In order to cut the desired speed and quality, the wire produced with suitable alloys must be passed through a series of processes. In these processes, it increases the breaking resistance of the wire. Advantages of Our Cutting Wire; Makes fast cutting The surface of the material comes out clean Works for a long time without breaking Wire can be stretched as desired It does not elongate as it gets hot.
Cast iron (GG15, GG20, GG25), Ductile Iron (GGG30, GGG40, GGG50, GGG60), Cast steel (X20Cr13), Alloy steel, Stainless steel (SS304, SS310, SS316), etc. metals are carefully manufactured with our 7 ton casting capacity (in one pot). In our R&D unit, within our structure, products suitable for your demands are started drawing, design and processing with your final approval. The control of drawing, design, casting and labor costs control by us. That's the basis of to produce quality products.
Hello everyone. we are removing hematite iron ore in Mersin / Turkey. This is a new field. We got all their legal permissions. The area is very close to Turkey / Mersin sea port in Mediterranean. It is in a hot area. Iron can be removed for 12 months. Total ore is 360,000 tons, our target is 30,000 tons per month. iron tenor above 55%. If you contact me, I can send test reports. Respects
We will remove the Hematite Iron Ore in Turkey / Mersin / Anamur. There will be no intermediaries in this business. we are targeting 25.000 Tons per month. total 300.000 tons. our place is close to the Mersin sea port. Mersin is a hot region. We can extract it for 12 months. average 60% tenor.
Copper and Brass production
Standard Aluminium Sheets, Foiled Aluminium Sheets, Painted Aluminium Sheets, Aluminium Treas Plates, Standard Aluminium Coil, Bright Aluminium Coil, Embossed Aluminium Coil, Mosque Domes Alloy : 1XXX, 3003, 3005, 3103, 3105, 5005, 5754, 5083 Temper : F, H0, H111, H1X, H2X, H3X, H00 Thickness : Min. 0,18 mm. Max. 20 mm Width : Min. 500 mm. Max. 2.200 mm Length : Min. 400 mm. Max. 8.000 mm
Standard Aluminium Sheets, Foiled Aluminium Sheets, Painted Aluminium Sheets, Aluminium Treas Plates, Standard Aluminium Coil, Bright Aluminium Coil, Embossed Aluminium Coil, Mosque Domes Alloy : 1XXX, 3003, 3005, 3103, 3105, 5005, 5754, 5083 Temper : F, H0, H111, H1X, H2X, H3X, H00 Thickness : Min. 0,18 mm. Max. 20 mm Width : Min. 500 mm. Max. 2.200 mm Length : Min. 400 mm. Max. 8.000 mm
Using copperbond earth rods is the most economical method of achieving a low earth resistance. 99,95% pure copper is applied electrolytically to a high tensile strength, low carbon steel core and forms a metallurgical bond between the steel core and the copper.
