Find Verified Work Benches Suppliers, Manufacturers and Wholesalers

Solid Fuel Thermoblock


* Solid-fuel thermo block Boilers manufacturing, between 60.000/350.000 kcal/h capacity, 5 models and desired capacity special producing.

* Boiler is working as full automatic.

* Montage is acceptable to air passages. Fuel loading and burning process eventuate as full automatic.

* Through special interior design, efficiency is high and energy cost very low than LPG and diesel fuel.

* When the after working, come into regime and arrived to desired heating.

* Fuel feeding is from bottom and continual, for this blaze donÆt deflate.

* Perfect heat insulation for the Boiler, and external interview electrostatic paint, for this it has got very aesthetic.

* Through from special interior design, burning and after burning out of gas, take as maximum degree, harmful effluent gas and chimney heating to be lowered minimum value.

* Our manufacturing is acceptable according to TSE and International Standards. Boiler steel is high quality and long life for that reason boiler life is longer than others.

Laminate or Melamine top with alumimium profiled melamine legs.

Adjustable backrest and seat. Chromium plated base with wheels. Foam with 32 dansity. Ergonomic design.

Panel with melamine top melamine panel with aluminium laminate
Sizes: l:240 w:60 h:110cm

Active neckrest, gaslift and backrest controlled by under armrest buttons, sliding seat, adjustable armrest height, chromium plated steel frame, backrest with mesh that is covered by genuine leather.

30mm melamine faced chipboard table top with leather writing pad, 30mm Gofrato painted MDF under top, Aluminium supported legs.

Specifications of the Boiler TSM 300
Capacity 300 lt/day
Volume 220 lt.
Serpentine Chrome, Nickel Flexible (Cr-Ni L 316)
Insulation 50 mm Glasswool
Boiler ST 37 Sheet
Fluid Anti-freeze & Water
Overlay Fiberglass Casing
Extra Heater 2000 Watt Resistance with thermostat
Net Weight 65 kg.
Full Weight 285 kg.
Working Pressure 6 bar
Test Pressure 10 bar
Expansion 10 lt.
Product Codes/
Specifications WUNDER PREMIUM 1808
Absorption Panel Cooper Strip 0.12 mm
Absorption Panel Coating* Titanium Coated
Manifold/Flow Lines Copper
Welding Method Ultrasonic
Glass Overlay* Low Iron Tempered
Insulation* Glass Wool
Leak-proofing Alumunium & EPDM & Silicon
Dimensions 1988x1218x90 mm
Weight 31,4 kg.
Flow PipeCount 10
Flow Pipe Diameter °8 mm
Manifold Pipe Diameter °18 mm
Liquid Capacity 1.04 lt.
Flow Rate 100 lt/h
Test Pressure 20 bar
Working Pressure 10 bar
Pressure Loss Tolerances 1.0 mbar
Heat Resistance 232 ¦C
Casing Electrostatic Painted Aluminium
Base Sheathing Embossed-finished Aluminium.

Liquid-Gas Fuel Boiler

* ¦ETIK ISI SANAYI EKO SG series manufacturing between 75.000-800.000 kcal/h capacity and 13 models.

* EKO SG series through special interior design has got %92 efficiency.

* It is working as without problem, with natural gas, LPG, Fuel Oil and with diesel fuel.

* Interior design is come into being, steel body and 4 transition system .Through this system, heat transfer and efficiency is very high.
Through from special interior design, burning and after burning out of gas, take as maximum degree, harmful effluent gas and chimney heating to be lowered minimum value.
When the using acceptable burner, chimney output gas heating not exceeding 180 degree.

* Control panel usable is very easy.

* Through the with hang burner and cleaning cover, combustion chamber and slices can be clean as very easy.

* At the Boiler, use the refractor concrete and through heat losing.
Boiler water heat can be control from on the control panel. Control panel has got necessary equipment, for the Boiler safety working.

* Perfect heat insulation for the Boiler, and external interview electrostatic paint, for this it has got very aesthetic.

* Our manufacturing is acceptable according to TSE and International Standards. Boiler steel is high quality and long life for that reason boiler life is longer than others.

Solid Fuel Boiler

Solid fuel boilers are manufacturing for free(independent)houses, villas, workplaces, offices for economical heating and comfort about 20.000-120.000 kcal/h capacity range and six models.


HIGH EFFICIENCY
Boilers have %88 efficiency with ergonomics control panel, servo motor hardware, special interior design and water grill system.

USING FACILITY
Through to large feeding cover, filling the fuel and ignition operation can make easily. With easy using control panel, boiler work maximum efficiency and economical type automatically by adjusting the fan speed and boiler temperature adjustment. Thanks to movable and rotary water grill only moving the ash arm empty the ash in to the ashtray..

9 piston pump 1000 rpm per minute work revolution :175 bar 80 liter

19 kilogram

1. working system by phase
2. multihead scale group
3. product contact surface ansi 304 cr-ni stainless steel
4. serve system horizantal jaw and pallet unit
5. 9â?? touch screen
6. photocel on / off working
7. regular and sensetive vertical / horizantal sealing with p.i.d controller
8. closed system electric ve mechanic
9. emergency stop
10. fault / problem warning system
11. automatic film stablizer shaft
12. easy use panel / board for operator

Number of Drums 2 pcs
Working Width 165 cm
Number of Blades 6 pcs
Weight 360 kg
Tractor Power 25-45 HP

The PFN Lag Screw has a diameter of 11mm and is channeled throughout its entire length. It also features a cannulated structure and works integrally with the compression screw.

AGRIMP Combined Thresher can both work on pulley-belt system or by the use of a shaft. It works out wee, barley, oats, rye, and similar products productively and fast. With additional devices you can harvest lentil chickpea; broad bean etc. and demanded type of straw for stock breeding, which can be gotten by changing the sieves. Crops become clean by two shaking systems. It is sacking. System that makes it comfortable to the user to put the ropes into a sack or to deliver them to a trailer which pulled at the back. It brings an easy way of using by in the front mounted adjustable drawbar and fizzed drawbar at the back.

AGRIMP Combined Thresher can both work on pulley-belt system or by the use of a shaft. It works out wee, barley, oats, rye, and similar products productively and fast. With additional devices you can harvest lentil chickpea; broad bean etc. and demanded type of straw for stock breeding, which can be gotten by changing the sieves. Crops become clean by two shaking systems. It is sacking. System that makes it comfortable to the user to put the ropes into a sack or to deliver them to a trailer which pulled at the back. It brings an easy way of using by in the front mounted adjustable drawbar and fizzed drawbar at the back.

With a minimum pressure our machine ensures sensitive deviding without warming the dough. Our machine has a ss drum and self lubrication system for smooth working. Different sizes and capacities available.

1. Easy Working Ability
2. Powder Products Screw Unloading System
3. Filling Motor Servo Motor (Omron)
4. Machine Parts Which Will Contact To Goods Ansi 304 Cr-ni
5. Horizontal Jaw Group Servo Motor (Omron)
6. Pallet Group Servo Motor (Omron)
7. Easy Use 7 Touch Screeen Monitor
8. Able To Work With Photocell And Without Photocell
9. P.i.d Control System For Horizontal And Vertical Jaw System
10. Package Order
11. Closed System Electroncs
12. Emergency Stop Ability
13. Error System
14. Automatic Chaft

The PFN Compression Screw works in integration with the PFN Lag Screw. If compression up to 5mm is desired on the fracture line, the compression screw should be selected to be 5mm shorter than the lag screw. If 10mm compression is desired, the compression screw should be selected to be 10mm shorter than the lag screw.

Description
It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.
Leaf blades make shear cuts by moving in the opposite direction of each other with hair harpssa in the hair harpses. (In this model, hair is ly mobile on harpses.)
The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.
The wing behind the cutting section opens the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel.
It can be used even in small garden type tractors that do not tire the tractor.
The cutting part position adjustment is hydraulically adjusted before going down the tractor.
The blades work in each position (Including in the upright position).
It can be used efficiently in harvesting green feed crops and legumes.
The recommended use is 2-3 normal gears 12-16 gas. (Operator, field status may vary depending on tractor type.)

Double Cutter Bar Mowers
It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.
The two blades move in the opposite direction on top of each other, cutting shear.
There are no harpses on the blades in this model.
The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.
The wing behind the cutting section opens the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel. It can be used even in small garden type tractors that do not tire the tractor.
The cutting part position adjustment is hydraulically adjusted before going down the tractor.
The blades work in each position (including in the upright position).
It can be used efficiently in harvesting green feed crops and legumes.
The recommended use is 2-3 normal gears 12-16 gas. (Operator, field status may vary depending on tractor type.)

Model /- MTY - 350
Warehouse Volume / (lt) - 350
Number of Discs / (pcs) - 1
Number of Leaves - (pcs) - 4 & 6
Dispenser Setting / (p) - MANUAL
Cycle / (p) - 540 D/DK
Working Width / (m) - 16 & 20
Length / (cm) - 115
Weight / (cm) - 135
Width / (cm) - 100
Total Length / (kg) - 50

EXPLANATION:

It is small in size, large in function, very easy to carry and use, you can easily transfer to your tractor and vehicles in the field, in the garden, in the garage, with tankers and barrels.

It is made of durable and high quality material with its aluminum body structure.

Thanks to the durable and high quality intermediate button, the stop and start commands are in the hands of the user and provide great convenience.

DZY - 220 Volt SMALL Submersible Liquid Transfer Pump; With its extremely useful, portable, water - resistant structure, it provides better performance, transfer, pressure increase and convenience.

Level DC pumps, in cases where AC (220 volts) electrical connection is not available or operation is required in different areas, allow easy connection to vehicle batteries with its 3 meter cable and battery clips, and become your biggest assistant in your liquid transfer processes.

Our pumps are guaranteed against manufacturing faults and you should receive your pump in working condition. It is not guaranteed against usage errors.

In case of user - induced errors, repair, maintenance and repair services are provided according to the user's request.

USAGE AREAS:

Diesel transfer to your vehicles
irrigation
Aquarium filling and emptying
Suitable for filling or emptying caravans and boats
Tractor
Harvester
work machines,
truck, trailer, caravan
Fishing boats, dinghy etc. diesel in vehicles
0 - 10 oil, water
Etc. It is used in filling, discharging and evacuation processes of liquid substances.
INSTRUCTIONS FOR USE:

Prevent leaking and air intake by using hose clamps on hose connections.
Run for a maximum of 45 minutes and rest for 15 minutes without interruption.
The pressure height is 3 meters from the ground.
Do not run dry and idle.
Never use in flammable and combustible materials such as gasoline, thinner, acid!
Use 12 volt DZY pumps in 12V accumulators, use 24 volt DZY pumps in 24V accumulators!
The 12 volt DZY submersible pump works on accumulators between 18 - 200 amps. The 24 volt DZY submersible pumps works on accumulators between 36 - 400 amps.
TECHNICIAL SPECIFICATIONS:

Voltaj: 220 V DC

ALANKO Electronic Bird Scare Cannon protects your plantations, your fruit and vegetable gardens from unwanted birds and wild animals in an environmentally friendly way without giving any harm to the nature and helps you to gather a bumper crop.
It works with a propane tank up to 20 bars
Low gas consumption â?? 20 lb. propane tank delivers approximately 17,000 explosions
Works with a 12V battery (the battery and the charger are included)
The battery life is between 30 to 45 days after the first charging according to the explosion interval selected.
There are single or double explosion options with five different explosion intervals (2-5-10-15-30 minutes or random).
It produces a sound of 120 db.
It can be adjusted to operate only during the day, only at night or 24 hours uninterruptedly.
It runs problem-free in bad weather conditions.
The plastic parts are resistant to ultraviolet rays and the metal parts are galvanized.
The easy to install and easy to use.

50 / 20 ton capacity c type deep drawing press
Table dimensions ààààà.à 500 x 600 mm.
Moving table dimensions à.... 480 x 600 mm.
Strokeàààààààààààà..500 mm. (adjustable)
Work capacity àààààà.à..600 mm.
Main cylinder diameteràà....160 mm./ 250 bar
Height of table from base .à950 mm.
Advance speed ààààààà...150 mm/sec
Pressing speed .ààààààà.32 mm/sec
Return speed àààààààà.180 mm/sec
Working pressure àà.ààà.250 bar (adjustable)
Cushion capacityàààà..àà.20 ton (adjustable)
Cushion cylinder diameterà.110 mm.
Cushion stroke ààààààà.170 mm. (adjustable)
Cushion dimensionsààà.àà390 x 460 mm.
Motor powerààààààààà.11 kw 15 hp 1450 rpm/min.
Pump ààààààààààà..àà.42 l/m.
Hydraulic equipment àààààaron
Electricity equipment à.àààsiemens

Delivery period:stock
Price :12.000 euro

Motorized animals are coin operated or time setting amusement rides that work with rechargeable batteries, can go forward and turn left and right with music. They are the current trend for child amusement. These electric motorized animals are mobile and allow children to ride the animal of their preference in parks, shopping centers, game centers, playgrounds and zoos at a safe and regulated speed of preference. Both children and adults may ride these animals at the same time.

Motorized animals are coin operated or time setting amusement rides that work with rechargeable batteries, can go forward and turn left and right with music. They are the current trend for child amusement. These electric motorized animals are mobile and allow children to ride the animal of their preference in parks, shopping centers, game centers, playgrounds and zoos at a safe and regulated speed of preference. Both children and adults may ride these animals at the same time.

Motorized animals are coin operated or time setting amusement rides that work with rechargeable batteries, can go forward and turn left and right with music. They are the current trend for child amusement. These electric motorized animals are mobile and allow children to ride the animal of their preference in parks, shopping centers, game centers, playgrounds and zoos at a safe and regulated speed of preference. Both children and adults may ride these animals at the same time.

Electrical overhead travelling cranes can be useed generally closed areas also open area like factories or stock area.

Design, engineering, manufacturing, installation and all kind of technical service of overhead cranes which can be used in shipyard, steel sector, machine manufacturer, store area, marble factories who need to lift any load are our main work.

We have solutions according to customer requirements like low headroom overhead crane or suspended overhead crane. EOT Cranes which are using generally at closed area are manufactured at two main kind. Double girder electrical overhead travelling cranes and single girder electrical overhead cranes.

Our main products are electrical over cranes, gantry cranes, jib cranes, monorail hoists, double girder crane hoists, transfer trolleys, elevator hoists, chain hoist, electrical wire rope hoists, endcarriages for overhead or gantry cranes also special proccessing crane fro galvanizing factory, shipyard cranes, shaft gantry cranes, smart crane systems, container gantry cranes, port cranes, power station cranes. what you need about electrical overhead crane systems that is our work.
Also Arnikon engineering has everything about electrical overhead travelling crane systems like as radio frequency remote control, bus bar systems, motorised or spring cable reel, limit switches, power carriying and transfer systems, cable carriying systems, electrohiydraulic or electromagnetic brakes. We have dealers and distributors in Alger, Iraq, Russia, Syria, Iran, Azerbaijan, Jordan, Israel, Saudi Arabia, UAE, Bahrain, Egypt, Morocco, Tunus, Kenya, Senegal, Pakhistan, Kazakhistan etc. And our overhead crane systems are working all over the world.durmus.yaman@arnikon.com.tr

Electrical overhead travelling cranes can be useed generally closed areas also open area like factories or stock area.

Design, engineering, manufacturing, installation and all kind of technical service of overhead cranes which can be used in shipyard, steel sector, machine manufacturer, store area, marble factories who need to lift any load are our main work.

We have solutions according to customer requirements like low headroom overhead crane or suspended overhead crane. EOT Cranes which are using generally at closed area are manufactured at two main kind. Double girder electrical overhead travelling cranes and single girder electrical overhead cranes.

Our main products are electrical over cranes, gantry cranes, jib cranes, monorail hoists, double girder crane hoists, transfer trolleys, elevator hoists, chain hoist, electrical wire rope hoists, endcarriages for overhead or gantry cranes also special proccessing crane fro galvanizing factory, shipyard cranes, shaft gantry cranes, smart crane systems, container gantry cranes, port cranes, power station cranes. what you need about electrical overhead crane systems that is our work.
Also Arnikon engineering has everything about electrical overhead travelling crane systems like as radio frequency remote control, bus bar systems, motorised or spring cable reel, limit switches, power carriying and transfer systems, cable carriying systems, electrohiydraulic or electromagnetic brakes. We have dealers and distributors in Alger, Iraq, Russia, Syria, Iran, Azerbaijan, Jordan, Israel, Saudi Arabia, UAE, Bahrain, Egypt, Morocco, Tunus, Kenya, Senegal, Pakhistan, Kazakhistan etc. And our overhead crane systems are working all over the world.

EXPLANATION:

It is small in size, large in function, very easy to carry and use, you can easily transfer to your tractor and vehicles in the field, in the garden, in the garage, with tankers and barrels.

It is made of durable and high quality material with its aluminum body structure.

Thanks to the durable and high quality intermediate button, the stop and start commands are in the hands of the user and provide great convenience.

DZY - 12 Volt B�°G Submersible Liquid Transfer Pump; With its extremely useful, portable, water - resistant structure, it provides better performance, transfer, pressure increase and convenience.

Level DC pumps, in cases where AC (220 volts) electrical connection is not available or operation is required in different areas, allow easy connection to vehicle batteries with its 3 meter cable and battery clips, and become your biggest assistant in your liquid transfer processes.

Our pumps are guaranteed against manufacturing faults and you should receive your pump in working condition. It is not guaranteed against usage errors.

In case of user - induced errors, repair, maintenance and repair services are provided according to the user's request.

USAGE AREAS:

Diesel transfer to your vehicles
irrigation
Aquarium filling and emptying
Suitable for filling or emptying caravans and boats
Tractor
Harvester
work machines,
truck, trailer, caravan
Fishing boats, dinghy etc. diesel in vehicles
0 - 10 oil, water
Etc. It is used in filling, discharging and evacuation processes of liquid substances.
INSTRUCTIONS FOR USE:

Prevent leaking and air intake by using hose clamps on hose connections.
Run for a maximum of 45 minutes and rest for 15 minutes without interruption.
The pressure height is 3 meters from the ground.
Do not run dry and idle.
Never use in flammable and combustible materials such as gasoline, thinner, acid!
Use 12 volt DZY pumps in 12V accumulators, use 24 volt DZY pumps in 24V accumulators!
The 12 volt DZY submersible pump works on accumulators between 18 - 200 amps. The 24 volt DZY submersible pumps works on accumulators between 36 - 400 amps.
TECHNICIAL SPECIFICATIONS:

Voltaj: 12 V DC
Kullan�±m Alanlar�±: Mazot, su, s�±v�± aktarma
Rekor kal�±nl�±�?�±: 19 mm
Litre/ Dk: 20 - 25 LT.
Amper: Max. 2 Amper
Kablo Boyu: 3 metre
Airlik: 540 Gr
Sirekli Ialima: 45 - 60 Dakika
Dinlendirme: 15 - 20 Dakika
Basin y kseklik: 4 Metre
Uzunluk / ap: 20cm/ 50mm

Model Storm 2200
Length 2700 mm
Width 2400 mm
Height 4100 mm
Working Width 2200 mm
Power Required 110-200 hp
P.T.O 750 or 1000 rpm
Number of Knife 12
Number of Wheel 2
Number of Shaft 2
Tractor Connection 3 Point Lifting System
Blower System Hydraulic and Electronic System
Chimney Layout Hydraulic 360
Machine Weight 2000 kg

BKV BTV Model Pressure Relief Control Valve are hydraulically operated control valves and designed to maintain valve upstream pressure value constant and stable, regardless of flow rate variations. When line pressure is higher than the adjusted pre-set valve pressure level, inlet pressure is kept stable by opening fully the valve. In case of sudden pressure increase, it releases the higher pressure wave in a pressure sensitive manner and in this way, the water system works regularly. When there is no flow in the main valve, it closes by itself as fully tightness. The valves hydrodynamic body is designed for unobstructed flow path and provides excellent and highly effective modulation capacity for high differential

1. Color Touch 12 Beijher Display (Sweden)
2. Plc Control Unit Beijher Ethercat (Sweden)
3. Pallet Control Jaskawa (Japan) With Servo Control
4. Air Shaft Roller Holding Unit
5. Pid Temperature Control System On The Screen
6. Online Connection
7. Printed Packaging Photocell Control By Sick (German)
8. Program Storage
9. Feature To Work Wä°th Encoder For Unprinted Packaging
10. Seeing The Number Of Packaging And Capacity On The Screen
11. Festo ( Japan) Pneumatic Equipment
12. Error System On The Screen
13. 8-10 Bar Air Requirement
14. Electricity Consumption: 7 Kw

Works with propane gas cylinders
No power supply needed, ignition by magneto
Explosion time gap selection between 2 and 30 minutes
Producing 110 to 120 db. sound
2500 explosions with an standard LPG cylinder
Effective area of 10000 m2
Runs flawlessly in any weather conditions
Plastic parts are resistant to ultraviolet rays and galvanized metal parts
Easy to setup and simple to operate.
CE certified.
Using the tripod, the cannon rotates around its axis at each blast.
Effective in different directions due to rotation
Useful for tall plants such as crops and sunflowers
Adjustable height between 1 and 1.5 meter
Galvanized steel pipes
KBS M1 & KBS M2

Description

It is connected to the tractor with 3 hanger system and works with the movement

it receives from the tail shaft.

The blades cut shear with two-way movement between harpses. (Harps on this model Is still)

The automatic protection mechanism on It Is switched on when stuck in an obstacle, preventing damage to the machine.

The wings behind the cutting section open the tractor wheel space, preventing grains from spilling by crushing the harvested product by the wheel. It can be used even in small garden type tractors that do not tire the tractor.

Hydraulic and Mechanical type two types are available.

It can be used efficiently in harvesting green feed crops and legumes.

Recommended usage method 1-2 normal gear 10 -14 gas shaped. ( Operator, Field Status may vary by Tractor Type. )

Description

It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.

The blades cut shear between the harpses with two-way movement. (Harps are still in this model)

The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.

The wings behind the cutting section open the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel. It can be used even in small garden type tractors that do not tire the tractor.

There are two types of hydraulic and mechanical types.

It can be used efficiently in harvesting green feed crops and legumes.

Recommended use is 1-2 normal gears 10 -14 gas. (operator, field status may vary depending on tractor type.)

Mechanical
Model Panther 100
Machine Round Baler & wrapper Machine
Weight 5500 kg
Length 8600 mm
Width 2200 mm
Height 2600 mm
Wheels Dimension 400/60-15.5
Number of Wheels 2
Number Axel Single Axel
Vehicle connection Single point from front
Bale Dimension 550*630 mm
Bale weight 70-120 kg
Capacity 60 Bales/h
Chamber working system Gear to Gear with chain
Compaction system Roller with rubbber belt
Hydraulic Unit Two different hydraulic unit with cooling fan
Net or Film binding system Pneumatic 700 mm wide
Wrapping System Double wrapping arm with 375 mm Film roll
Electrical
Required Power 10kw
Required Volt 380 volt (3 phase)
Operating System Electronic Control System
PTO Optional

EXPLANATION:

DZY - 220 Volt 1 Outboard Liquid Transfer Pump; It provides better performance and transfer pressure increase with its external outlet function.

In cases where AC (220 volts) electrical connection is not available or operation is required in different areas, D�¼zey DC pumps are your biggest helpers in your liquid transfer processes by easily connecting to vehicle batteries with a 3 meter cable and battery clips.

USAGE AREAS:

Diesel transfer to your vehicles
irrigation
Aquarium filling and emptying
Suitable for filling or emptying caravans and boats
Tractor
Harvester
work machines,
truck, trailer, caravan
Fishing boats, dinghy etc. diesel in vehicles
0 - 10 oil, water
Etc. It is used in filling, discharging and evacuation processes of liquid substances.
INSTRUCTIONS:

Use 12 volt DZY pumps in 12V accumulators, use 24 volt DZY pumps in 24V accumulators!

Never use in flammable and combustible materials such as gasoline, thinner, acid!

Do not run dry and idle.

TECHNICIAL SPECIFICATIONS:

Voltaj: 220V AC/ KW 0.75

The pipe is manufactured from 100% virgin unplasticized polyvinyl chloride compound (PVC-U). No re-worked material is used. The pipe is produced under an ISO 9001-2000 Quality System.

Duzgunler Plastic pipes are produced in a range of pressure ratings 4, 6, 10 and 16 Bar. Duzgunler Plastic pipes are produced in a range of nominal pressure (PN) at 20°C. The appropriate derating factors should be applied for working pressures when subjected to higher temperatures. The nominal outside diameters and nominal wall thickness are based on an overall service (design) coefficient C=2,5 from 50 mm.to 90 mm. and C= 2 from 110 to 355.

Duzgunler Plastic pipe is used in a wide range of applications, such as:
* Irrigation systems main/sub-mains.
* Chemical industrial processes.
* Pressurized water supply
(city town, industrial, home, commercial.)
* Drainage/sewage applications.
* General services, domestic water, A/C drainage.
* Ducting, electrical, telecommunication.
* Industrial process plants oil/gas/petrochemical.
* Desalination processes, brine disposal, mineral water

Features of Duzgunler Plastic U-PVC pipes:
* Fully compliant with TS 274 EN 1452 and ISO standards.
* Resistant to a wide range of chemicals and corrosion.
* High Impact Resistance
* Quality assured and tested to the strict specifications of the standard for dimension compliance, impact resistance, burst pressure, flattening & joint tightness.
* Smooth internal bore for low friction losses.
* Compatible with the full range of PVC-U Pressure fittings.
* Long service life under a wide range of conditions.
* Will not support combustion.

There are 4 types according to their pressure resistance:
PN4
PN6
PN10
Pn16

Available Diameters (mm) :
50
63
75
90
110
125
140
160
200
225
250
280
315
355
400

Technical Features:
Raw Material: U-PVC
Standard: TS 274 EN 1452
Dimension: Pipes produced in ranging from Ø 50 mm. dia. up to Ø 400 mm. dia.
Normally supplied in 6 m length Others can be supplied on request.
Connection: rubber ring joint for all size

Technical Features:
-Gravity: 1350 < p < 1460 kg/m²
-Opaque: max. % 0,2
-Deformation heat: 80 C
-Resistance to diklormetan: Resistant
-Quantity of vinilcloridmonome: less than 1ppm
-Resistance of int. Pressure: Two times of nom pressure
-Resistance to stroke: TIR < % 10


Unpacked.

Dear Sir/Madam
Please be noted that our Company is the exporter/manufacturer of Packaging Machine.
We are exporting our products directly and indirectly to Germany, Italy, Holland, Denmark, Romania, Bulgaria, Slovakia, Iceland, Iran, Qatar and most of the African region. Some of them within the scope of the contract \ fason manufacturing agreement.
Our company with its experienced engineer team is trying to get its place in domestic and foreign markets at the levels through increasing its facilities in design, project, counseling, production and turnkey solutions.
We have already experience in export business, particularly in your region. Since we have recently received many requests for our products from your country. So, we would be pleased to work together to achieve mutual business objectives with mutual collaboration.
Please find attached files as our new models. If you are interested, we will be happy to send you any further information. We may be available in the near future to discuss the subject with you as well.
Thanking for your kind interest and we look forward your early reply, we remain,

Each deck can work independent of each other in the electrical multi deck oven. As the bases of decks are stone, they distribute the heat to each deck equally. The heat (inside deck bottom and top heat) and the steam temporization can be arranged optionally on different rates. Thus, it is assured to bake different production on every deck. There is the fermentation cabinet which is situated under the oven for the pre-cooking fermentation, through which the heat and moisture rates can be arranged. It can be used as single deck and can be added with deck, hood and fermentation cabinet optionally and according to needs. It assures minimum energy consumption. It is easy to transport thanks to the tires on the oven.

Bakery & Confectionery Machines

We are offering the following bakery equipment:

Flour sifter, water measuring tank, dough mixers both high speed and spiral, dough hoist, dough divider, rounder, moulder, auto panner, conveyor system, inter-prover, bakery machine, bakery proofer, rotary & swing tray baking oven, depanner, cooling tunnel & bread slicer and other bakery machinery. Cookie making plant, bun plant, toast machines, plantery mixer, pizza baking ovens, dough sheeters etc.