Pellet press is a machine that mixes powdered raw materials or mixed products with steam, mechanically compresses them with a die and rollers, and turns them into pellets of various diameters (1,8- 16 mm Dia). This process makes the feed more dense and easy to transport, makes it easier for the animals to digest, and reduces the dust in the feed. It preserves nutrients, provides a homogeneous distribution, and reduces feed waste, thus providing a balanced nutritional source to animals. In pelleted feed, quality increases and harmful microorganisms are destroyed. In industrial feed production, these machines make the production of large quantities of feed efficient and standardized.
GENERAL FEATURES:
All parts with product contact are made from stainless steel
Single Motor with belt drive
Adjustable feeding auger rpm
Automated steam adjustment system adjusted to the feeding auger rpm
By the adjustable blades, desired pellet length
Automatic central greasing system
Temperature monitoring with PT 100 sensors
Inhibitor magnet system for metals that may escape the pressing chamber
Safety pin feature in case of sudden overloads and impacts
Automatic or mechanical roll adjustment
Optional slow die rotation system
Optional temperature and speed sensor on rolls
Pellet coolers are used to reduce the hot pellets coming out of the pellet press to the ambient temperature. The waiting time of the pellet in the cooler is controlled by adjustable level sensors on the cooler. By the temperature sensors at the pellet cooler outlet, the pellet feed temperature is seen at the machine discharge. By the distributor system at the inlet of the pellet cooler, evenly cooling is captured at every point by ensuring a homogeneous distribution and product height within the cooler. The feed dust in the hot air going to the aspiration unit is sent back to the system by the aspiration cyclone. After cooling, the pellets hardens and dust formation is prevented during packaging.
The moisture is reduced to extend the shelf life of the pellets.
Single or double-deck models are available depending on the intended use
GENERAL FEATURES:
Lower body side sheets are specially designed for fresh air intake
The lower grate can be driven by motor, pneumatic or hydraulic
The lower grate is designed to allow air entry
Body sheets have bolt and nut connections for easy assembly/disassembly
Solid fuel boilers are manufacturing for free(independent)houses, villas, workplaces, offices for economical heating and comfort about 20.000-120.000 kcal/h capacity range and six models.
HIGH EFFICIENCY
Boilers have %88 efficiency with ergonomics control panel, servo motor hardware, special interior design and water grill system.
USING FACILITY
Through to large feeding cover, filling the fuel and ignition operation can make easily. With easy using control panel, boiler work maximum efficiency and economical type automatically by adjusting the fan speed and boiler temperature adjustment. Thanks to movable and rotary water grill only moving the ash arm empty the ash in to the ashtray..
* Solid-fuel thermo block Boilers manufacturing, between 60.000/350.000 kcal/h capacity, 5 models and desired capacity special producing.
* Boiler is working as full automatic.
* Montage is acceptable to air passages. Fuel loading and burning process eventuate as full automatic.
* Through special interior design, efficiency is high and energy cost very low than LPG and diesel fuel.
* When the after working, come into regime and arrived to desired heating.
* Fuel feeding is from bottom and continual, for this blaze donÆt deflate.
* Perfect heat insulation for the Boiler, and external interview electrostatic paint, for this it has got very aesthetic.
* Through from special interior design, burning and after burning out of gas, take as maximum degree, harmful effluent gas and chimney heating to be lowered minimum value.
* Our manufacturing is acceptable according to TSE and International Standards. Boiler steel is high quality and long life for that reason boiler life is longer than others.
741 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Solid fuel boilers with stoker are manufacturing for free (independent) houses, villas, workplaces, offices for economical heating and comfort about 30.000-60.000 kcal/h capacity range and three models.
HIGH EFFICIENCY
Boilers have %88 efficiency with high sensitive digital control panel and special interior design. Also fuel feeding is under the combustion chamber so boiler efficiency is higher and waste materials are less than others.
SOOT CLEANING
Cleaning of the soot, make once or twice a year by special boiler interior design. Cleaning cover is back side of the boiler so this, cleaning is easier than other boilers.
* ¦ETIK ISI SANAYI EKO SG series manufacturing between 75.000-800.000 kcal/h capacity and 13 models.
* EKO SG series through special interior design has got %92 efficiency.
* It is working as without problem, with natural gas, LPG, Fuel Oil and with diesel fuel.
* Interior design is come into being, steel body and 4 transition system .Through this system, heat transfer and efficiency is very high.
Through from special interior design, burning and after burning out of gas, take as maximum degree, harmful effluent gas and chimney heating to be lowered minimum value.
When the using acceptable burner, chimney output gas heating not exceeding 180 degree.
* Control panel usable is very easy.
* Through the with hang burner and cleaning cover, combustion chamber and slices can be clean as very easy.
* At the Boiler, use the refractor concrete and through heat losing.
Boiler water heat can be control from on the control panel. Control panel has got necessary equipment, for the Boiler safety working.
* Perfect heat insulation for the Boiler, and external interview electrostatic paint, for this it has got very aesthetic.
* Our manufacturing is acceptable according to TSE and International Standards. Boiler steel is high quality and long life for that reason boiler life is longer than others.
Making moulds and aluminum injection, manufacturing the qualified productions in both products for the automotive and spare parts sector with aou rasing capacity from 0.1 kg to 4 kg in the pressed casting, from 0.3 kg to 100kg in the aluminium sand casting
We are trying to gain or inventing the products to be produced for the first time by our Research and Development Institute by means of the computer programmes called UNIGRAPHICS Cad-Cam. We also make moulds for plastic and aluminium injection.
Best way to retain product freshness and preserve quality by packing harvested materials in a range of 25-50 kg bags and also other industrial products such as manure, fertilizer, bolt etc. Our machines not only provide a significant contribution in the feeding animals by preserving materials longtime freshness and productivity to the livestock sector but also decrease workload of industrial sectors.
Best way to retain product freshness and preserve quality by packing harvested materials in a range of 25-50 kg bags and also other industrial products such as manure, fertilizer, bolt etc. Our machines not only provide a significant contribution in the feeding animals by preserving materials longtime freshness and productivity to the livestock sector but also decrease workload of industrial sectors.
Best way to retain products' freshness and preserve quality by wrapping harvested materials such as silage , pulp, sawdust, all roughage feeds etc.. in range of 100,500,1000 kg . Our machines provide a significant contribution in the feeding animals by preserving materials' longtime freshness ( if bale protected under appropriate conditions, protect its freshness long times and productivity so that the expenses stemming from animal feed is minimized.
Fast heat-up
As a result of large and well-positioned heating surfaces the water in the Reflex-Marvel boiler is heated extremely fast and evenly, offering the highest possible convenience in heated water for you.
Optimal heat insulation
High-quality insulating foams and linings ensure the highest possible protection against heat losses. Highest economy.
Different needs - different products
Reflex-Marvel boilers of the "S" series come with a nominal content of 150, 200, 300, 400 or even 500 litres to meet your individual needs.Reflex-Marvel boiler can be combined easily with all heating systems for oil,gas or solid fuels.Reflex-Marvel boilers are highly suitable for low -emperature heating systems. From the single-family house to the large commercial enterprise we have the right hot-water boiler for you. Reflex-Marvel boiler are produced accurate to size in cylindrical design and made of quality sheet steel ST 37-2.
Direct Bitumen Manufacturer & Exporter from Iran and Iraq. We produce and supply Bitumen 40/50, 60/70 and 80/100 in bulk and new steel drums. We offer competitive prices, consistent quality and reliable production capacity for international markets. SGS/Intertek inspection can be arranged, and serious buyers are welcome to visit and inspect our factory, laboratory, storage and loading facilities before cooperation. We are seeking long-term partnerships with reliable importers, distributors and trading companies worldwide.
Our company manufactures the products up to 500 kgs in demanded spectral analysis. Especially it does the products of bronze gears and bolts used for the gear boxes and reductors with endless screws. we also do the assembling of these parts.
