Automatic tyre changer
Automatic tyre changer for 10 û 22 ( inside locking 12 -22, outside locking 10 û 20) wheels complete with automatic lubricator, tyre lever, plastic protection for bead breaker blade 230/400v. 50hz three phase motor, with pneumatic tilting back vertical positions, with pneumaticly operated system which locks the mounting/demounting tool 3mm. Away from the rim edge, with inflating gun.
Optional : tubeless tyres inflating device from slides with pedal control and air tank.
Working pressure 8 û 12 bar
Bead breaker force2500 kg.
Working voltage380v three-phases
Working voltage (optional)220v single-phase
Motor power1, 1 kw- 1, 5 hp / 1500 rpm
Weight235kg
Width845mm
Dept1030mm
Height1950mm
Plate height780mm
Max. Wheel diameter1000mm
Wheel width3 û 12
This unique machine is used to correct and straighten all kinds of
Defected steel and alloy rims
Mechanic motor 0, 55 kw, 1400 rpm, 0, 75hp,
7.3 ampere, 3 phase - single phase, 220v - 380 v
Hydraulic motor 0, 55 kw 900 rpm, 0, 75hp,
8.7 ampere, 3 phase - single phase, 220v - 380 v
Sound level 35 db
Hydraulic piston power
Total pressure = ðr2 x 160 (working pressure bar)
Total pressure = 3, 14* (3, 15 x 3, 15) = 31, 156kg
Total pressure = 31, 156 x 160 = 4 984, 96kg
Diameter of piston cylinder we used is 63mm which comes to as radius 3, 15 cm.
As you have seen above formula you can have 5 tons of total pressure while working on our rsm1800 / rsm2200 machines.
Standard accessories list
1. 18 pcs rim attaching center
2. 1 pcs (mihengir) metal pointer
3. 6 pcs press tips
4. 3 pcs support axis for press tips
5. 1 pcs lever
6. 1 pcs lathe pen
7. 1 pcs upper support
8. 1 pcs lower support
9. 4 pcs support pins
10. Flange nuts and bolts
Optional accessories list
1. S1, ac motor drive (speed control unit)
2. Mmp150, magnetic metal pointer
This unique machine is used to correct and straighten all kinds of defected steel and alloy rims
Mechanic motor 0, 55 kw, 1400 rpm, 0, 75hp, 7.3 ampere, 3 phase - single phase, 220v - 380 v
Hydraulic motor 0, 55 kw 900 rpm, 0, 75hp, 8.7 ampere, 3 phase - single phase, 220v - 380 v
Sound level 35 db
Hydraulic piston power
Total pressure = ðr2 x 160 (working pressure bar)
Total pressure = 3, 14* (3, 15 x 3, 15) = 31, 156kg
Total pressure = 31, 156 x 160 = 4 984, 96kg
Diameter of piston cylinder we used is 63mm which comes to as radius 3, 15 cm.
As you have seen above formula you can have 5 tons of total pressure while working on our rsm1800 / rsm2200 machines.
Standard accessories list
1. 18 pcs rim attaching center
2. 1 pcs (mihengir) metal pointer
3. 6 pcs press tips
4. 3 pcs support axis for press tips
5. 1 pcs lever
6. 1 pcs lathe pen
7. 1 pcs upper support
8. 1 pcs lower support
9. 4 pcs support pins
10. Flange nuts and bolts
Optional accessories list
1. S1, ac motor drive (speed control unit)
2. Mmp150, magnetic metal pointer
Hydraulic piston power
Total pressure = ðr2 x 160 (working pressure bar)
Total pressure = 3, 14* (3, 15 x 3, 15) = 31, 156kg
Total pressure = 31, 156 x 160 = 4 984, 96kg
Diameter of piston cylinder we used is 63mm which comes to as
Radius 3, 15 cm.
As you have seen above formula you can have 5 tons of total pressure while
Working on our rsm2200 / rsm2400 / rsm2600 machines.
Standard accessories list
1. 18 pcs rim attaching center
2. 1 pc (mihengir) metal pointer
3. 6 pcs press tips (in different forms)
4. 3 pcs support axis for press tips
5. 1 pc lever
6. 1 pc lathe pen
7. 1 pc upper support
8. 1 pc lower support
9. 4 pcs support pins
10. Flange nuts and bolts
On standart export pallets
163 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
Mechanic motor 0, 55 kw, 1400 rpm, 0, 75 hp - 7, 3 ampere, 3 phase - single phase // 380 v - 220 v
Hydraulic motor 0, 75 kw, 900 rpm, 1 hp - 8, 7 ampere, 3 phase - single phase // 380 v - 220 v
Sound level 45 db
Hydraulic piston power
Total pressure = ðr2 x 160 (working pressure bar)
Total pressure = 3, 14* (3, 15 x 3, 15) = 31, 156kg
Total pressure = 31, 156 x 160 = 4 984, 96kg
Diameter of piston cylinder we used is 63mm which comes to as radius 3, 15 cm.
As you have seen above formula you can have 5 tons of total pressure while
Working on our rsm2200 / rsm2400 / rsm2600 machines.
Standard accessories list
1. 18 pcs rim attaching center
2. 1 pc (mihengir) metal pointer
3. 6 pcs press tips (in different forms)
4. 3 pcs support axis for press tips
CWP Machinery manufactures spiral conveyors in various diameter, various length, and various types according to the purpose from carbon steel or stainless steel materials.
Chain Conveyors
It is used for the high capacity transport of the granule materials in narrow space, in short or long distance. It usually operates in the galleries of the underground mining firms. It is durable through its driving gear, pads, and conveyor chutes of high quality steel against corrosion.
Serin otomotiv ltd is an independent wholesale distribution business (with our trade mark brakingtech) situated in izmir, turkey. We are the specialists in the procurement and supply of repair kits and spare parts of brake caliper for commercials vehicles (scania, man, daf, renault trucks, volvo trucks and mercedes, trucks, buses, trailers)
Serin otomotiv ltd is an independent wholesale distribution business (with our trade mark brakingtech) situated in izmir, turkey. We are the specialists in the procurement and supply of repair kits and spare parts of brake caliper for commercials vehicles (scania, man, daf, renault trucks, volvo trucks and mercedes, trucks, buses, trailers.).
We have costumers-partners all around the world (belgium, england, poland, north america, russia, new zealand, south africa ).
SCREW CONVEYORS; are used to for; moving, mixing, drying, and cooling of bulk materials.
Our SCREW CONVEYORS are, depending on the requirements of the process; Selected, designed and manufactured. Based on operating conditions; Drive types, beddings and blade tips are diversified and put into service.
Vacuum tankers are used to transport liquids, mud - slime or phos - phetic waste into the tank with the help of suction hoses.
These tankers are manufactured in a standard style with a cylindrical tank on a low frame, a rear cover and a vacuum motor that takes its power from the pto.
The tank is welded from inside and outside. There are enough breakwaters along the entire body.
The standard production material of the tank is st-37 sheet metal, but st-52 or hardox sheet metal is also produced in accordance with the wishes of our customers.
The rear lid is mounted on the body with adjustable hinges, which is easily opened upwards by means of hydraulic cylinder and hydraulic hand pump. The rear cover, which is locked with the leakproof seals and the hydraulic system, guarantees 100% sealing.
The vacuum pump is mounted on the side of the easy-access chassis and picks up the power from the pto which can be controlled from the driver's cab.
The control panel has extra vacuum - meters and emergency valves. There are 2 buoys inside the tank so that the pumps do not absorb too much from the tank capacity.
Garbage container lifting system
Â?¢ safety bars for the back cover
Â?¢ rear projector lights for night shifts
Â?¢ attachment bars for co-workers on the back cover
Â?¢ rotating yellow signal lamp
Â?¢ waste water tank under the tank
Â?¢ automatic / manual remote control option
Â?¢ emergency stop buttons
Â?¢ rear view camera
Â?¢ pto provides working power for hydraulic system
Â?¢ container lifting devices can be customized to 120 - 240 - 400 - 800 - 1100 liters.
Technicial specifications
Standard objects (m3) 4 - 8
Special needs (m3) 9 - 24
Back cover volume (m3) 0.6-2.5
Compression ratio 1: 3 - 1: 6
Dump trucks are used to transfer materials such as sand, gravel and stone to construction sites. Standard material is produced with st-52 or hardox sheath, hydraulically-actuated rear-door option. The whole body, metal sheets and covers are to increase durability. U-shaped metal sheets can be produced. The rear cover is connected to the body and has an automatic locking system. It can be integrated into the system. The power take-off is taken from the pto. Transfer to pto to hydraulic pump. Oil tank 70 lt. It is capacitive. It has 125 î¼ suction filter and 25 î¼ return filter, ventilated tank cover, level indicator and discharge valve on the bottom. All parts and pipes are manufactured according to din standards. Low / high damper lifting power.
warning signs and lights
stairs in side front walls
one-piece fender covering all rear axles
hooks on the side walls, on the rear and front covers for the tarpaulin
Bus and Truck spare parts are supplied original or aftermarket quality. Products are directly from OEM or official dealers. We supply Mercedes, MAN, TEMSA, Otokar, BMC or Karsan spare parts original or aftermarket. We have connections with manufacturers of replacement parts as well. Setra, Neoplan, Tourliner, Travego, Tourismo, Atego, Actros, Axor spare parts parts all in our product range.
Bus and Truck spare parts are supplied original or aftermarket quality. Products are directly from OEM or official dealers. We supply Mercedes, MAN, TEMSA, Otokar, BMC or Karsan spare parts original or aftermarket. We have connections with manufacturers of replacement parts as well. Setra, Neoplan, Tourliner, Travego, Tourismo, Atego, Actros, Axor spare parts parts all in our product range.
Bus and Truck spare parts are supplied original or aftermarket quality. Products are directly from OEM or official dealers. We supply Mercedes, MAN, TEMSA, Otokar, BMC or Karsan spare parts original or aftermarket. We have connections with manufacturers of replacement parts as well. Setra, Neoplan, Tourliner, Travego, Tourismo, Atego, Actros, Axor spare parts parts all in our product range.
Bus and Truck spare parts are supplied original or aftermarket quality. Products are directly from OEM or official dealers. We supply Mercedes, MAN, TEMSA, Otokar, BMC or Karsan spare parts original or aftermarket. We have connections with manufacturers of replacement parts as well. Setra, Neoplan, Tourliner, Travego, Tourismo, Atego, Actros, Axor spare parts parts all in our product range.
A Refuse Garbage Compactor Trucks are vehicles that mechanically compact the contents of the containers to be emptied into its body. It is typically used by companies that are involved in trash collection or waste disposal. Trash is collected from homes and businesses, taken to a large facility, and dumped into the compactor. The machine then automatically compresses the trash down before being loaded on trucks for transport to a landfill site.
Procompactor Garbage trucks are built to gather wastes and compact them to gain more space within the truck superstructure body to transport them to the nearest waste treatment facilities.
The garbage or refuse trucks are carrier trucks that consist of a Refuse Body on their chassis. The main function of a Refuse Truck is to serve a collection of all kinds of refuse: garbage, solid waste, and recycling objects.
Refuse trucks are used mostly by municipal duties and private waste management companies.
Depending on truck size there is a variety of chassis configurations and loading volume offered to fit the necessities of regions or workplaces.
Waste management is a critical issue for cities and communities worldwide. With the increasing population and development, itâ??s becoming increasingly challenging to manage the growing amount of waste. The Rear Loader Refuse Garbage Compactor Truck is a game-changer in the waste management industry, providing advanced features and benefits that make waste collection and disposal more efficient and eco-friendly.
ProCompactor Waste Management Equipments provide most chassis configurations with additional features.
163 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
