Istanbul Communication Suppliers and Manufacturers

CATV amplifier Features: With push pull with return path options Forward : 47-862/65-862 Return: 5-25/30/42/65 w Rf gain: 20-30-34-40 db versions Output level: 116-118-123 dbuv versions( en norms apply ) F-type connections. GaAs-ET , Push pull In house power supply In 20pcs/pack. Dimensions : 35*45*55 cm Weight app : 32kgs/pack.

Robotic Gloves

Power Splitters, designed to evenly split high power cellular signals with minimal reflections or loss. 4 way splitter supporting 700 2700 MHz frequency band has low VSWR value. It is used to divide one feeder cable into two feeder cables.

Exposure of electronic components to dust, dirt, and steam causes negative effects on products. These negative effects can manifest as corrosion, short circuits, or performance problems. In order to prevent these results, leak tests of electronic products should be performed. In applications where it is not possible to pressurize electronic products and the internal volume, the external volume of the product must be pressurized to perform the leak test using the pressure decay method. IP67, IP68, and hermetic properties tests can be done by using EP60- IP standards leak test apparatus. Working with BT4000 Series devices, the product is fast, reportable, and precise.

This cable is high in professional stage and studio work, such as keyboard or guitar. they are used for connecting components.

Electric panel meters and its equipment on demand

Brief Introduction of Wire Mesh Cable Tray Systems: These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits. Features and Benefits of Wire Mesh Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes 9. Heights Shown are Internal Dimensions Manufacturing: Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP) Mode: Top curved / Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional Suggestions: 1). MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. 2). SURFACE FINISH: A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free. B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays. Specification for power and communications cabling containment. 1). SCOPE Steel Wire Cable Tray conforming to the material and performance of this specification. 2). GENERAL A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. B). Surface Treatments: i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2) ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729. iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L) C). Steel Wire Cable Tray Widths & Depths i). Cable Tray dimensions are all internal. ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm. iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm All trays are of 3005mm long 3). SPECIFICATION a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -: 4 mm for trays of widths up to 150mm 4.5 mm for trays of widths of 200mm 5.0 mm for trays of widths of 300mm 6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050) c). Trays will be constructed with a 50mm x 100mm mesh configuration. d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray. e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray. f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld. 4. TESTS, CERTIFICATION AND CONFORMITY a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537. b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification. c). Fire test certification should be published in accordance with the E30/E90 standard. d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result. We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays. PSC

How many games: 10 Duration: Unlimited balls for predefined duration. Other: It is played by throwing balls against the screen. The screen is protected against ball throwing. Games have different sounds according to the scenarios. Games can be selected by 10 different buttons. Width: 120 cm Lenght: 200 cm Height: 200 cm Weight: 140Kg Power: 1000 W.

How many games: 1 game which can be played by 1 or two person. Duration: Controllers are active during a pre-defined duration. Other: It goes back to the main menu when time is up. Width: 110 cm Lenght: 180 cm Height: 190 cm Weight: 140 Kg Power: 700 W.

Duration: game needs to start in 20 seconds. Other: number of hits can be pre-arranged for 1 coin. Width: 75 cm Lenght: 120 cm Height: 230 cm Weight: 150 Kg Power: 300 W.

Cable conduits are manufactured in white. They can be easily used in sub plaster or plaster surface installations in interior spaces. They are both decorative and durable. As they are made from PVC, in the event that they catch fire, they are self extinguishing. For this reason, the cables and the area of usage are protected from fire risk. Code Diameter Packaging Quantity KN-9642 16x16 mm 50 mt. KN-9643 25x16 mm 50 mt. KN-9644 40x16 mm 50 mt. KN-9645 25x25 mm 50 mt. KN-9646 25x40 mm 25 mt KN-9647 40x25 mm 25 mt. KN-9648 40x40 mm 50 mt. KN-9649 40x60 mm 50 mt. KN-9650 60X40 mm 50 mt. KN-9651 60x60 mm 50 mt. KN-9652 100x40 mm 25 mt. KN-9653 100x60 mm 25 mt. KN-9654 50x10 mm 50 mt. KN-9655 70x20 mm 50 mt.

Bluetooth vision:BC2.0 with A2DP Bluetooth Specification: BC2.1 with A2DP Bluetooth Operation distance: Max 10 meter Range of Frequency: 2.4GHz Input Voltage: DC12V ¿C 24V Weight: 700g Operation temperature: -20íµ í½ 70íµ Screen size: 7 Inch (16 : 9). Camera Specification: OV 1/3 -inch color Resolution : 628X582 Lens: 2.8mm Standard : PAL Working temperature:-10íµ--60íµ Power:9V-14V Visual angle: 170 íp Night vision distance: 0-5m Distance mark line, waterproof, shockproof

Optical fiber cables

According to the receiving orders from our customers collers (min 50kg-max. 1500kg) can be put of for sale with the preferred diameters and surface finishing characteristics such as; bright, extra bright, copper-plated, galvanized, annealed, annealed skin-passed, zinced, chrome plated and phosphate plated. Technical and mechanical charecteristics: according to uni 3823/din/17223/eni 2701 norms Production range: diameters from mm 1.50 to mm14.00 Applications: This type of products lends itself particularly to the manifacture of Grills and baskets for fitted kitchens Grills for domestic appliances Household articles Supermarket trolleys and baskets Promotional display units Bird and pet cages Omamental chains Articles fort he car industry..Etc