Echnical specifications A design that does not necessitate any additional appliance. A design that does not necessitate vacuum chamber owing to the dripping method filling specialty. Ink tanks are not stable on the machine. Micro processor control. Low energy consumption. 2x16 lcd screen. Electronic signaling system (buzzer). Full digital control of refilling. Full digital control of setting adjusments(the sensitivity of the needles, the timing and speed of refilling, the period of vacuuming and cleaning etc. ) Dimensions:270x300x280 mm. Weight:7 kgs Voltage:220 v-230 v Ekinox ex color 0602 has 7 motor in it. Adjustment of all motor settings is possible. Automatic servicing system. The machine shows the defective system in the machine at the opening by testing all the components. Automatic signaling system when the cartridge is filled. Sensitive needles that control ink level. Desired ink quantity can be filled with filling via clips. Every new cartridge model can be filled via additional clips and sensitive needles. All color and black sponge filled cartridges can be filled. Automatic identification of the level of ink within all sponge filled cartridges. Adjustable balance settings through vacuuming in color cartridges. Easy cleaning - even when there is color contamination in cartridges. A digital counter recording how many filling operations have been performed. For the cartridges that cannot be filled through nozzles, the sensitive needles or filling via clips unit can be used instead. Easy maintanence; defected, broken or over used motors, sensitive needles, tubes, cradle, bottles can easily be changed.
Ink-jet derlin refill&vacuum machine This derlin refills and vacuums HP 23/41/78 type of inkjet cartridge. Derlin Machines are used for the purpose of refilling & vacuuming ink through the nozzles of the cartridge Derlin Machines are not only used for refill machines but also for refilling/vacuuming by hand Derlin Machines are more durable than the plastic refill & vacuum clips, because of their mecanism and raw material
This derlin refills and vacuums lexmark 16/17 type of inkjet cartridge. Derlin machines Derlin machines are used for the purpose of refilling & vacuuming ink through the nozzles of the cartridge Derlin machines are not only used for refill machines but also for refilling/vacuuming by hand Derlin machines are more durable than the plastic refill & vacuum clips, because of their mecanism and raw material
Derlin ink-jet cartridge refill machine This derlin refills and vacuums lexmark 1970 type of inkjet cartridge. Derlin machines Derlin machines are used for the purpose of refilling & vacuuming ink through the nozzles of the cartridge Derlin machines are not only used for refill machines but also for refilling/vacuuming by hand Derlin machines are more durable than the plastic refill & vacuum clips, because of their mecanism and raw material
Automatic vessel cleaning machine Automatic cleaning of cylindrical vessels with open top and bottom outlet by means of rotating brushes and solvent flushing. It is used in the paint, printing ink, general chemical and adhesives industries. It is suitable to clean vessel diameters from 600 mm to 1200 mm with same machine. The construction is simple and therefore reliable. Automatic cleaning process. Easy exchangeable brush system. Tightly sealing lid with special seal material. Pneumatic operated tilting platform.
Model no.: jbc1024 Product origin: turkey Brand name: balansmatic Payment terms: l/c, t/t Supply ability: 100 / month Minimum order: 1 Delivery lead time: 8 Certification(s): ce , iso Click here for demo videoi : http://www.Youtube.Com/watch?v=ojjt7tnss2i Click here for factory demo video : http://www.Youtube.Com/watch?v=_wuhxyjfzxs Specifications: Rim straightening machine Ce certified by kema, holland Dimensions Height....................................................................1250 mm Length....................................................................1110 mm Width.....................................................................610 mm Net weight..............................................................370 kg Motor specifications Mechanic motor.........................0, 55 kw, 1400 rpm, 0, 75 hp, 3 phase - single phase, 220v - 380 v Hydraulic motor........................0, 75 kw 1400 rpm, 1 hp, 3 phase - single phase, 220v - 380 v Sound level..............................35 db Hydraulic piston power Total pressure = pi x r2 x 160 (working pressure bar) Total pressure = 3, 14 x (3, 15 x 3, 15) = 31, 156kg Total pressure = 31, 156 x 160 = 4 984, 96kg Diameter of piston cylinder we used is 63mm which comes to as Radius 3, 15 cm. As you have seen above formula you can have 5 tons of total pressure while working on our jbc1018/jbc1022 machines. Standard accessories list 1.18 pcs rim attaching center 2.1 pcs (mihengir) metal pointer 3.5 pcs press tips 4.3 pcs support axis for press tips 5.1 pcs lever 6.1 pcs lathe pen 7.1 pcs upper support 8.1 pcs lower support 9.4 pcs support pins 10. Flange nuts and bolts
Pittsburg lock machine Specifications: Capacity: 1.2 mm Power supply: 380v/3hp/50hz Motor output: 2.2 kw K:pittsburg lock S:drive cleat C:power flange D:round right cleat Height: 1100 mm Width: 800 mm Length: 1300 mm Weight: 425 kg
Flange machine Specifications: Working capacity: 0.50-0.80 mm Motor output: 7.5 kw Station: 18 Height: 1200 mm Width: 1150 mm Length: 5500-6000 mm Weight: 2400 kg
The style machine is designed for professional use. It has been designed and manufactured for cutting procedures of wood, plastic material (pvc) or light alloys (aluminium profiles). On the upper table, with the upper part of the saw, strip cutting procedures for wooden panels and secondary products and aluminium and pvc profiles can be undertaken. For the cutting of plastic or wooden material with square or rectangle cross sections in blocks. For the cutting of aluminium or plastic door or window profiles with certain degrees. Cutting feature to left and right at standard 15 ª -22, 5 ª -30 ª -45 ª -90 ª 29kg, box dimensions: W : 560mm L : 450mm H : 450mm
This portable machine is used to join the corners of wooden frames. Designed for opening swallow hole to wooden frame profiles and corner assembling processes. Specially alloyed aluminium table, long-lasting paint Safety switch depending on arm movement Mitre system providing centering Automatic open-close function. Easy movement with bearing on steel mil. Axis adjustable motor and middle triangle part. Adjustable stroke screw. Carbide-tipped blade. Solid aluminium body. Automatic release after operation. Fine combining mechanism. Easily portable 11kg, box dimensions: W : 420mm L : 510mm H : 495mm
Water pumps.
Pumps like centrifugal pump, rotor pump.
Pumps like industrial pumps, centrifugal pumps and submersible pumps.
Water and firefighting pumps, centrifugal end suction surface pumps, centrifugal double suction pumps (split case), centrifugal circulation inline pumps with dry rotors, vertical multistage pumps and boosters, firefighting pumps according nfpa20 with electric motors and diesel engines..Manufacturer
Fabric dyeing machines, fabric washing machines, fabric finishing machines for dyes.
Combine Airlines conditioner cleaner.
"1.1kw, copper wire, oil engine, stator-92*130mm, brass head+connection, 2 brass impellers, S/S body,, S/S screw, G1'' 220V 50HZ CABLE CORD SIZE / LENGTH 5m*4 (3+1)*1mm+Euro plug"
All of our products are produced according to the wishes of our buyers. We are ready to produce whatever our buyers want. Our barrels are produced entirely from 4140 steel. It has been delivered to our customers in different countries of the world, which has successfully passed the robustness tests. (TITANIC ARMS)
Hydraulic Gear Pumps
Hydraulic Bent Axis Piston Pump
