POMX 50 Sustainable Stone for Denim Washing. POMX 50 is the new generation long life durability Stone especially for Denim Stone Washing. -It is % 100 sustainable products for future investment of Denim Washing -Useful for every kind of Stone Wash -Useful with all kind of Denim washing Chemicals All kind of denim washing and stone washing process can useable. We recommended 2 Kg /per Kg of garment for each stone wash. You can fallow as Pomice Stone usage.
hydraulic adapters
hydraulic fittings
hydraulic fittings
5x80 Steel Nail Material: High Carbon Steel The Number of Nail in the Box: 100 (+/- 2%) pcs Shaft Diameter : 5 mm (0.19'') Total Length:80 mm (3.14'') Head Diameter (Approx.):9.5 mm (0.37") Item Weight:11.20 gr Box Weight:1120 g (2.46 lb) Parcel Weight: 22,5kg (49.60 lb) The Number of Box in the Parcel :20 The Number of Nail in the Parcel:2.000 Box Dimensions: 11 x 7 x 6 cm (4.33'' x 2.75'' x 2.36'') Parcel Dimensions: 32,5 x 25,5 x 16,5 cm (12.79'' x 10'' x 6.49'') Oval Head Tensile Strength: 1900-2000 N/mm2 Measurement System: Metric, inch As Ozcan Nail, we take care of our each product particularly. Because of this reason, we take optimum amount and weight into consideration in the process of packing.These plans were shaped according to our customers practical suggestions and ideas. Hardened and Tempered steel For fastening wood or metal parts to cement wall and fastening metal parts to metal part.Thanks to the knurls on the nail's surface,it clasps to the place where it is nailed.It can be nailed up to 5 mm (0.19'') using a hammer and up to 7 mm (0.27'') using a nail gun on to metal plates. Made in Turkey.
Material: High Carbon Steel The Number of Nail in the Box: 200 (+/- 2%) pcs Shaft Diameter : 4 mm (0.15'') Total Length:40 mm (1.57'') Head Diameter (Approx.):7.5 mm (0.29") Item Weight:3.50 gr Box Weight:700 g (1.54 lb) Parcel Weight: 21kg (46.29 lb) The Number of Box in the Parcel :30 The Number of Nail in the Parcel:6.000 Box Dimensions: 8 x 7 x 6 cm (3.14'' x 2.75'' x 2.36'') Parcel Dimensions: 32,5 x 25,5 x 16,5 cm (12.79'' x 10'' x 6.49'') Oval Head Measurement System: Metric, inch As Ozcan Nail, we take care of our each product particularly. Because of this reason, we take optimum amount and weight into consideration in the process of packing.These plans were shaped according to our customers practical suggestions and ideas. Hardened and Tempered steel For fastening wood or metal parts to cement wall and fastening metal parts to metal part.Thanks to the knurls on the nail's surface,it clasps to the place where it is nailed.It can be nailed up to 4 mm (0.15'') using a hammer and up to 5 mm (0.19'') using a nail gun on to metal plates. Made in Turkey.
Elastomeric bearings reinforced internally with one or more steel plates, chemically bonded during vulcanisation are called laminatid elastomeric bearings. Elastomeric bearings permit a smooth and uniform transfer of loads from beams to substructure and also allow beam rotations at the point of support due to deflection of beam under loading. They further allow lateral and longitudinal movement of beams caused by thermal forces. Elastomeric bearings have no moving parts and thermal expansion and contractions are supported by shear capacity of elastomers. There is no sliding motion between bearing and beam or between bearing and abutment.
The bearings we have defined so far are the basic types, which constant feature is the fact that they allow all-ways movements and rotation. However, movements can be limited in one or all ways, thus obtaining guided or fixed bearings, respectively. In the first case -guided bearings- the restriction is obtained by means of guides parallel to the supporting axe that allows movement. To make friction as low as possible, PTFE and stainless steel sheets are welded to the guides.
If, on the contrary, a fixed bearing is desired, guides are added parallel to both axes, so that movement is completely blocked. Each elemental layer, subject to stresses and movements, deflects
Elastomeric bearings we have defined so far are the basic types, which constant feature is the fact that they allow all-ways movements and rotation. However, movements can be limited in one or all ways, thus obtaining guided or fixed bearings, respectively. In the first case -guided bearings- the restriction is obtained by means of guides parallel to the supporting axe that allows movement. To make friction as low as possible, PTFE and stainless steel sheets are welded to the guides.
High damping rubber bearing (HDRB) were developed in 1985 by Professor James Kelly at the University of California at Berkeley. Ozdekan was the first company which manufactured and applied this technology in Turkey, using it in 2014 for the AFAD building in Ankara, Turkey. The isolating system was designed with consultation by engineers. Ozdekan was the first company in Turkey which developed the lead rubber bearings with consultation of university researchers. The HDRB isolators are composed of a series of vulcanized rubber layers separated by reinforcing steel plates, thus providing a device capable of supporting high vertical loads with minimal compression (elevated vertical stiffness) and allowing high horizontal displacements with relatively small reactions (low horizontal stiffness). The main property of the rubber is its ability to dissipate energy (damping capacity). When positioned underneath a building or bridge beams, they have the effect of increasing the structure's fundamental vibration period, thus greatly reducing any effects of seismic activity. The HDRB isolators are bolted to external metal plates allowing them to be fixed to the adjacent structures using anchor brackets or bolts.
These hydraulic parts are used in automotive and energy industry. We make mass production such as 60k-80k a month. Depends on the order quantity
We manufacture machines that are used for steel wire production. This machine arranges, and cuts steel wires according to the buyers needs 180cm x 100cm x 100 cm
Anchor wedge concrete anchor bolt.
Hose collectors, plastic double filters, automatic filter systems, fertilizer tanks, valves and other small spare parts.
Pvc tarpaulin, pvc leather, fumigation sheets, coffee sheets, dam liners in pvc.
Chemicals, surfactant, adhesive, polyester polyol, dot, plasticizer, DOT, DOP, unsaturated polyester resin, saturated polyester resin, composite.
V-belts, timing belts, polyruthene belts, aprons, discs.
Industrial greases (all type), gear oil, textile lubricants, hydraulic oil, apparent surface, compressor oils, and metal forming lubricants.
Trailer Curtainsider, Plastic molding parts , nitrile gloves.