Plate Heat Exchangers as well as plates and gaskets separately.
Our models are similar to those of Sondex and Funke companies.
ARES offers PHE models: A1S, A1L, A2S, A2L, A3S, A4A, A6S, A6M, A8S, A8L, A12S
Bearing Housings
In our company, many kind of bearing housings are manufactured.
We are manufacturing bearing housings with our experience of being in the sector for many years and our knowledge of steel sheet deep drowning. Bearing housings are produced by metal sheets and they are also suitable for bearing bore. Labyrinthed housings protect bearing from moisture, dust and other hard conditions. It causes long life service. We have also polyamide tight fitted bearing housings. You can find our housing table below.
The 3D ROTARY TABLE MODULE allows us to make 3-dimensional cuts by attaching to the CNC STYROFOAM CUTTING MACHINE. Products such as polygon, auger polygon, oblique auger polygon are made with 3D ROTARY TABLE MODULE.
POMX 50 Sustainable Stone for Denim Washing. POMX 50 is the new generation long life durability Stone especially for Denim Stone Washing.
-It is % 100 sustainable products for future investment of Denim Washing
-Useful for every kind of Stone Wash
-Useful with all kind of Denim washing Chemicals
All kind of denim washing and stone washing process can useable.
We recommended 2 Kg /per Kg of garment for each stone wash. You can fallow as Pomice Stone usage.
Shaft Diameter : 5 mm (0.19'') Total Length:80 mm (3.14'') Head Diameter (Approx.):9.5 mm (0.37")
Item Weight:11.20 gr
Box Weight:1120 g (2.46 lb)
Parcel Weight: 22,5kg (49.60 lb)
The Number of Box in the Parcel :20
The Number of Nail in the Parcel:2.000
Box Dimensions: 11 x 7 x 6 cm (4.33'' x 2.75'' x 2.36'')
Parcel Dimensions: 32,5 x 25,5 x 16,5 cm (12.79'' x 10'' x 6.49'')
Oval Head
Tensile Strength: 1900-2000 N/mm2
Measurement System: Metric, inch
As Ozcan Nail, we take care of our each product particularly. Because of this reason, we take optimum amount and weight into consideration in the process of packing.These plans were shaped according to our customers practical suggestions and ideas.
Hardened and Tempered steel
For fastening wood or metal parts to cement wall and fastening metal parts to metal part.Thanks to the knurls on the nail's surface,it clasps to the place where it is nailed.It can be nailed up to 5 mm (0.19'') using a hammer and up to 7 mm (0.27'') using a nail gun on to metal plates.
Shaft Diameter : 4 mm (0.15'') Total Length:40 mm (1.57'') Head Diameter (Approx.):7.5 mm (0.29")
Item Weight:3.50 gr
Box Weight:700 g (1.54 lb)
Parcel Weight: 21kg (46.29 lb)
The Number of Box in the Parcel :30
The Number of Nail in the Parcel:6.000
Box Dimensions: 8 x 7 x 6 cm (3.14'' x 2.75'' x 2.36'')
Parcel Dimensions: 32,5 x 25,5 x 16,5 cm (12.79'' x 10'' x 6.49'')
Oval Head
Measurement System: Metric, inch
As Ozcan Nail, we take care of our each product particularly. Because of this reason, we take optimum amount and weight into consideration in the process of packing.These plans were shaped according to our customers practical suggestions and ideas.
Hardened and Tempered steel
For fastening wood or metal parts to cement wall and fastening metal parts to metal part.Thanks to the knurls on the nail's surface,it clasps to the place where it is nailed.It can be nailed up to 4 mm (0.15'') using a hammer and up to 5 mm (0.19'') using a nail gun on to metal plates.
Elastomeric bearings reinforced internally with one or more steel plates, chemically bonded during vulcanisation are called laminatid elastomeric bearings.
Elastomeric bearings permit a smooth and uniform transfer of loads from beams to substructure and also allow beam rotations at the point of support due to deflection of beam under loading.
They further allow lateral and longitudinal movement of beams caused by thermal forces.
Elastomeric bearings have no moving parts and thermal expansion and contractions are supported by shear capacity of elastomers.
There is no sliding motion between bearing and beam or between bearing and abutment.
The bearings we have defined so far are the basic types, which constant feature is the fact that they allow all-ways movements and rotation.
However, movements can be limited in one or all ways, thus obtaining guided or fixed bearings, respectively. In the first case -guided bearings- the restriction is obtained by means of guides parallel to the supporting axe that allows movement.
To make friction as low as possible, PTFE and stainless steel sheets are welded to the guides.
