Nitrogen, nitrogen generator, laboratory type nitrogen generator, mini nitrogen generator, gas mixture, gas mixer, tank blanketing, on site nitrogen, on site gas, , controlled atmosphere, modified atmosphere, fumigation, food grade gas.Maintenance
Mechanical
Model Panther 100
Machine Round Baler & wrapper Machine
Weight 5500 kg
Length 8600 mm
Width 2200 mm
Height 2600 mm
Wheels Dimension 400/60-15.5
Number of Wheels 2
Number Axel Single Axel
Vehicle connection Single point from front
Bale Dimension 550*630 mm
Bale weight 70-120 kg
Capacity 60 Bales/h
Chamber working system Gear to Gear with chain
Compaction system Roller with rubbber belt
Hydraulic Unit Two different hydraulic unit with cooling fan
Net or Film binding system Pneumatic 700 mm wide
Wrapping System Double wrapping arm with 375 mm Film roll
Electrical
Required Power 10kw
Required Volt 380 volt (3 phase)
Operating System Electronic Control System
PTO Optional
Since 1969 "Tameki" brand has continued its efforts to comply with European Standards and continues its production ISO 9001: 2015 quality management system, 2014/31 and 2014/32 EU Type Approvals , CE and OIML conformity certificates.
The service department of our company continues its uninterrupted service - maintenance and calibration services within the framework of 24/7 customer satisfaction principles with its large vehicle fleet, fully equipped and trained expert staff.
Our R&D department, which we have developed in order to provide better service to our customers, is getting closer to its goals every day and carries out its research in line with your expectations.
With the policy of "always the best product" and "best service" adopted as a principle since its establishment."Tamaeki" brand symbolizes trust and quality at home and abroad.
Since 1969 "Tameki" brand has continued its efforts to comply with European Standards and continues its production ISO 9001: 2015 quality management system, 2014/31 and 2014/32 EU Type Approvals , CE and OIML conformity certificates.
The service department of our company continues its uninterrupted service - maintenance and calibration services within the framework of 24/7 customer satisfaction principles with its large vehicle fleet, fully equipped and trained expert staff.
Our R&D department, which we have developed in order to provide better service to our customers, is getting closer to its goals every day and carries out its research in line with your expectations.
With the policy of "always the best product" and "best service" adopted as a principle since its establishment."Tam�§eki" brand symbolizes trust and quality at home and abroad.
12046 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
We are Sia mechatronic, producing Paper core, edge board making machines since 2004. We are an experienced company with a great team which have global production experience. Our main office is located in Adana/Turkey, other remote offices in Istanbul/Turkey and many sales executive on the field. We are proud to inform you about our machines. For more information please contact with us! In addition, We have the ability to manufacture all kinds of paper machines and custom-made machines.
Minimum Edge 20mm
Maximum Edge 150mm
Maximum Pipe Wall Thickness 8mm
Minimum Cut to Length (20 m/min) 400mm
Maximum Cut-to-Length 6000mm
Maximum Cut-to-Length Speed 80 m/min
Knife Cutting System Servo-motor
Maximum Number of Layers 15 Pieces
Minimum pipe diameter 8mm (ID)
Maximum Pipe Diameter 600mm (OD)
Maximum Pipe Wall Thickness 18mm
Minimum Cut to Length 150mm
Maximum Cut-to-Length 6000mm
Maximum Pipe Cutting Speed 30 m/min
Maximum Number of Blades 10 units
Maximum Number of Layers 35 Pieces
PAPER BOBIN STAND
45 degree paper roll stand.
Max 5-50 layers, or customized the layers.
Paper roll distance 180 mm.
Paper roll center adapter.
Wheeled chassis.
Chassis fixing screwes.
PAPER GLUE STAND
Pneumatic glue pump 150 Lt/min.
Electrical glue pump 150 Lt/min.(Optionally)
Electrical glue heater resistance with oil.(5 KW 3 phase)
Mechanic paper breake
Mechanic glue scraper
PRE FORMING STAND
Min.diameter: 10 mm
Max diameter: 600 mm
Min-thickness: 0,5 mm
Max-thickness: 30 mm
Rewinding noses: Two noses single belt
Speed of adjust and control: Inverter
Power input: 3x380V
SERVO CUTTING STAND
6 Blades Pipe Cutting System with Servo
Cutting Motor: 0,75 Kw (6 Pieces)
Full Electronic Servo Controlled
Length Cutting System
Servo motor controlled blade cutting movement
Min: 130 mm Max: 6000 mm Cutting Length
Min: 0,5 mm Max: 15 mm Cutting Thickness
Min: 20 mm Max: 250 mm Inner Tube Drawing Feature
Smooth Cutting + - 2 mm
Production Speed Min: Max: 30 meters / minute
BELT CONEYOR STAND
Belt motor 0.37 kw.
Belt length 3000 mm.
Belt width 300 mm.
Belt motor with speed control.
COLOR PAINTING STAND
1-Roll motor 0.37 kw.
2-Roll length 300 mm.
3-Printing width 300 mm.
4-Roll motor with speed control.
Max Paper Width: 850mm
Max Speed: 250-300 Strokes/min
Control System: Servo Motor
Electric Power: 5 KW
Net Weight: 2100 Kg
Packed dimension: 3.15*1.8*1.9(L*W*H)
speed: 180-250strokes/min
PLC (Mitsubishi, Japan)
Transducer (Mitsubishi, Japan)
Servo motor (Mitsubishi, Japan)
Model WZFQ 1600A
Precision ±0.2mm
Max. width of unwinding : 1600mm
Max. diameter of unwinding : Â 1600mm (Inner core 3 6)
Min. width of slitting : 50mm
Max. diameter of rewinding 1000mm/ 1200mm(option)
Speed 350m/min
Total power 20-35kw
Suitable power supply 380v/50hz
Weight (approx.) 3000kg
Overall dimension
(L W H )(mm) 3800 2400 2200
A.C. 400 - Automatic Edge And Corner Cutting Machine
It cuts PVC and aluminum profiles serially. It has a full electropneumatic system. It has an electromechanical system. It cuts at any angle. It has a special stopper for 45 30 22.515 0 angles.
Cuts both PVC and aluminum profiles
Fully electro-pneumatic system
Electro-mechanical system
Cuts at all angles
Has a special stopper for 45 30 22.5 15 0 angles
Adjustable saw advance speed
400 mm diamond saw diameter
Stops automatically when the top cover is opened
There is a right and left conveyor system
Low energy and air consumption
Technicial Specifications
Voltage
380 â?? 220 V
Frequency
50-60 Hz
Total power
1,5 Kw
Air pressure
6 Bar
Air Consumption
8 lt/min
Dimensions (mm)
720 x 20 x 1280
Weight (Kg)
155
C.K. 401 - Automatic Glazing Bead Saw Machine
It makes 45 degree cutting of PVC lath profiles and removing the nail area. It has a full electropneumatic system. The working system is automatic and the horizontal advance speed can be adjusted. It makes serial and precise cuts.
Makes 45 degree cutting (without notches and faults)
Full electro-pneumatic system
Full automatic
Adjustable horizontal advance speed
Makes serial and precise cuts
Multi-system (Adaptable for all profile brands and types)
Metering conveyor for long materials (profiles)
Low energy and air consumption
Technicial Specifications
Voltage
220 â?? 380 V
Frequency
50-60 Hz
Total power
1,5 Kw
Air pressure
8 Bar
Air Consumption
8 lt/min
Dimensions (mm)
500 x 1000 x 1120
Weight (Kg)
135
Rotor Lenght - 635mm, The Rotor Diametr - 250mm, The Rotor Speed - 80-100rpm, Drive Motor Power - 30kw Pgr/red, Ph Pgr Set, Number Of Stationary Knives, Number Of Rotary Knives, Knife Material - Din 1.2379, Screw Drive 2,2kw Cooling Coil And
Shreider Elektric Components safety
Size: 1100*600*230 cm
Speed range: 0-12 pcs/minute
Fabric working width: min 30cm x4 bant - max 80cm x2 bant
It detects towel's cutting point exactly by sensors.
It is able to count the amounts
It is able to produce 600 amounts per hour of towels for standard dimension which is 50*100cm
Machine can stitch min 30*30cm - max 100*180 towels
ZIM A2000 machine can make concrete pipe, square culvert and other concrete materials between 800mm-2000mm diameter and 2000mm-3500mm lenght.
In this machines mortar stocking and filling operations are done by mortar conveyor band with bunker.
Materials which produced in this machine are transferred to drying area via crane.
Our machine is making production on steel pallets. Produced material is carried to drying area with outer mould. After discharging the ready material to drying area, outer mold is movingto main machine for new production.
Our Machine is working with hydraulic press and vibration systems.
Vibration system of the machine is special design of ZIM Engineers.
Vibration system which have oil cooling system and special oil unit.
Special designed strong chassi of the machine enables long live producing without errors. Vibration table is made on high precision CNC machines.
Gravel (Stone chips) obtained by breaking in various sizes are collected from 4 pieces of dosage silos into a collector band in desired amount through the bands. The speeds of the feeding belts which are located underneath of 4 pieces dosing silos can be set from the of frequency control panel.
Materials are moved into a mixer through these bands, moisturized by adding water and then obtained a homogenous and compressible mechanical material. Mixed and moistened material collected in loading silo through a band. There are 2 pieces of pneumatically controlled covers in loading silos in order to load the trucks fast.
12046 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
