Brief Introduction of Wire Mesh Cable Tray Systems: These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits. Features and Benefits of Wire Mesh Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes 9. Heights Shown are Internal Dimensions Manufacturing: Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP) Mode: Top curved / Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional Suggestions: 1). MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. 2). SURFACE FINISH: A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free. B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays. Specification for power and communications cabling containment. 1). SCOPE Steel Wire Cable Tray conforming to the material and performance of this specification. 2). GENERAL A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. B). Surface Treatments: i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2) ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729. iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L) C). Steel Wire Cable Tray Widths & Depths i). Cable Tray dimensions are all internal. ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm. iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm All trays are of 3005mm long 3). SPECIFICATION a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -: 4 mm for trays of widths up to 150mm 4.5 mm for trays of widths of 200mm 5.0 mm for trays of widths of 300mm 6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050) c). Trays will be constructed with a 50mm x 100mm mesh configuration. d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray. e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray. f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld. 4. TESTS, CERTIFICATION AND CONFORMITY a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537. b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification. c). Fire test certification should be published in accordance with the E30/E90 standard. d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result. We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays. PSC
Control :by technician Needed air :10.5 bar 12 m³/min.(duct 40 hdp) Air engine : double effective, 740 watt (2 pieces) Needed air for engines : 6 bar-1.6m³/min. Cable installing velocity : 0, 30, 50m/min. Lay down power :80~85 kg. Dimensions (width x lenght x height) : 365mm x 330mm x 540mm Weight of machine :46kg. In chrome box.
The diameters of wooden drums we are producing have a wide range between 40-320 cm. We can also manufacture hundreds types of cable drums regarding to their thicknesses, diameters, metal components and wedges measurements. Moreover, we are producing all sorts of plywood spools and MDF spools.
Cable conduits are manufactured in white. They can be easily used in sub plaster or plaster surface installations in interior spaces. They are both decorative and durable. As they are made from PVC, in the event that they catch fire, they are self extinguishing. For this reason, the cables and the area of usage are protected from fire risk. Code Diameter Packaging Quantity KN-9642 16x16 mm 50 mt. KN-9643 25x16 mm 50 mt. KN-9644 40x16 mm 50 mt. KN-9645 25x25 mm 50 mt. KN-9646 25x40 mm 25 mt KN-9647 40x25 mm 25 mt. KN-9648 40x40 mm 50 mt. KN-9649 40x60 mm 50 mt. KN-9650 60X40 mm 50 mt. KN-9651 60x60 mm 50 mt. KN-9652 100x40 mm 25 mt. KN-9653 100x60 mm 25 mt. KN-9654 50x10 mm 50 mt. KN-9655 70x20 mm 50 mt.
Optical fiber cables
According to the receiving orders from our customers collers (min 50kg-max. 1500kg) can be put of for sale with the preferred diameters and surface finishing characteristics such as; bright, extra bright, copper-plated, galvanized, annealed, annealed skin-passed, zinced, chrome plated and phosphate plated. Technical and mechanical charecteristics: according to uni 3823/din/17223/eni 2701 norms Production range: diameters from mm 1.50 to mm14.00 Applications: This type of products lends itself particularly to the manifacture of Grills and baskets for fitted kitchens Grills for domestic appliances Household articles Supermarket trolleys and baskets Promotional display units Bird and pet cages Omamental chains Articles fort he car industry..Etc
There are different sizes and sections for special profiles by the specialized methods such as turks heads and wire flatting. Together with the ordinary roun sections. Gunes wire also manufactures square, hexagonal, octagonal, triangulari rectangular, oval, half-oval, half-rounded, keystone, peeled round bars, ground bars and flat shaped sections and various sizes. Diameter of wire: 1mm-20 mm Packages: bunches Weight: 25 kg-1000 kg Proporties: Possible to produce with any surface characteristics and with preferred rigidity. Plating: Hot galvanized or cold heading wire Applications: This type of product lend itself particularly to the manufacture of For domestic appliances Accesories of lighting products Key and lock apparatus Household articles Metal nets/meshes Curtains-venetian blind miles etc
According to the receiving orders from our customers all type of bars can be straighten and Cut in respect of our customers diameter and length preferences. Gunes wire is continuing also to serve with the wire and tube surface grinding and polishing wire works from 4.00 mm to 80 mm diameters. Our wire straightening and cutting machines are suitable for ferrous, nn-ferrous anf high tensile wires(from 1.50 mm to 14.00 mm) Production range: Diameters from mm1.50 to mm14.00 and lengths from 20 mm to 4500 mm Applications: This type of product lends itsef particularly to the manufacture of Grills and baskets for fitted kitchens Grills for domestic appliances Household articles Supermarket trolleys and baskets Promotional display units Bird and pet cages Omamental chains Articles fort he car industry..Etc
Silicon rubber heating cables are mainly used in refrigeration and air conditioning Avantages 1) no extra thickness at connections 2) suitable price 3) cable with lead wire. Connection insulation between heating part and lead wire with silicon moulding ( totally waterprof ) 4) insulation material silicon rubber How you want we can do it
10-1000 cm inter :4-10 hickness 1-2 mm inter
5-1000 cm wideness, 240 cm lengthiness 4-10 cm highness, 1-2 mm sheet thickness Standard cable channel
5-1000 cm wideness, 240 cm lengthiness, 4-10 cmhighness, 1-2 mm sheet thickness Heavy duty cable channel
We make cable tray, cable ladder, electric panel, for Industrial supplies. We are capable of making all kinds of cable tray, cable ladder and all other accessories. We have good fortune of skillful workers and experienced engineers. We own a strong design working team including 10 people, each with at least 3 years of experience. Offering HIGH QUALITY cable tray, cable ladder, electric panel with COMPETITIVE PRICE, PROMPT DELIVERY, BEST SERVICE. We are produce; ò 1-cable ladder; ò 2-Elektrik panels; ò 3-cable trays; We are also suppliers of the following items; ò Electric conduits; ò Cable ò For more information please go to www.yilsa.com.tr
5-1000 cm wideness, 240 cm lengthiness, 4-10 cmhighness, 1-2 mm sheet thickness Heavy duty cable channel. 1000 meter.
10-1000 cm inter :4-10 hickness 1-2 mm inter.
CAT5E cable, CAT6 cable.
Fiber optic cables The main activities of bs telekom ltd. Are supply of fiber optic and copper telecommunication cables, related accessories and lan data cables. Also, we provide the following services: turn-key fiber optic cable link projects including inspection, supervision, installation, testing, splicing and commissioning works; factory testing / acceptance and telecom products outsourcing. In addition to these main activities bs telekom deals with supply of all related raw materials used in cable production and all fusion splicing / manufacturing equipment including machineries, splicing machines, testing devices and workshop tools. Engineering and know-how services for cable manufacturing are also included in our scope of work
Energy drinks, textiles, cables, fiber optic cables, fiber optic components, baby shoes, men's shoes, women's shoes, raincoat, pulses, olives, olive oil, women's bags, men's wallets, network equipment, rack cabin, iranian saffron..
Freezers, upright bottle coolers, electrical water heaters.
The casing is made of epoxy coated sheet metal impeller is made of forwarding curved epoxy coated sheet metal.
