3 phase mains and 3 phase generator voltage measurement,
3 phase load current and earth current measurement,
Contactor open and close relay outputs for mains and generator,
Configurable 6 inputs and 4 outputs,
3 resistive sender inputs for oil pressure, temperature and level,
Stop or fuel selenoid selection,
Programmable weekly working permit calendar,
Maintenance warning (working hour or elapsed month),
Exercise at programmed time intervals,
Off, manual, auto and test mode,
Power measurement by kva, kw, kvar, kvah, kwh, kvarh,
Compatible to diesel or gas generators
* sends sms to pre-defined gsm numbers for alarms
* controls the generator and monitors status information of the generator by sms
* remote control via internet, intranet, gsm or dial-up modem
* access to multiple generators by gen-agent scada software
* authorised access, secure communication
* suitable for telecommunication projects
* automatic transfer switching control and engine control
* logs last 32 events & alarm informations
* full metering facility, energy and power measurement
POWER SD 5 READY PLASTERING MACHINE
It is a high-performance ready-made gypsum plastering machine that pumps and sprays all kinds of gypsum or cement-based dry mixes and is used in interior and exterior plaster applications.
Technical Specifications
Machine Type: POWER SD 5
High quality mixing
Easily disassembled and transported
High quality electrical panel application
2 years warranty period â?? Delivery export value package type.
Technical Data
Power Supply 380 V - 50 Hz
Motor Power 5.5 kW
Compressor Capacity 250 liters/min - 5.5 bar
Carrying Capacity * 5-40 liters/min (These values may vary depending on the material used, the pumping height, the consistency of the pumped material, the type of pump, rotor and stator.)
Water pump 50 liters/min - 0.75kW
Transport Distance Horizontal * 40 meters (Standard if needed this will be long - option)
Transport Distance Vertical * 30 meters (Standard if needed this will be long - option)
Reservoir Volume 130 liters
Maximum Weight 285 kg
43 Power Regulation Correction Suppliers
Short on time? Let Power Regulation Correction sellers contact you.
- new type waist belt
- 70% polypropylene
- 30% cotton
- buckle: pom
- end: dkp
- length 130 cm
- compliant with regulations in respect of appearance
- economical price
Extra virgin olive oil pure cold-pressed juice from fresh olives from the trees in north west of Turkey especially Gemlik province.
Secan Group produces a series of Virgin oil products by following all the European regulations, ensuring every yield to be of guaranteed, stable quality.
SecanGrup has The production of an exclusive olive oil that made through purely mechanical methods, using cold extraction and without applying any kind of chemical treatment. Extra virgin olive oil pure cold-pressed juice from fresh olives from the trees in north west of Turkey. It does not contain any additives and have a very low level of free acidity. we produce series of Virgin oil products by following all the European regulations, ensuring every yield to be of guaranteed, stable quality. kindly do not forget to visit here secangrupcom, to get more and more detailed information of our products and also please do not hesitate to contact us if any questions or any comments of our products.
Used in a variety of industries including paper, petroleum, chemical,
phosphate power and fire protection , Clarifier Tanks, Filtrate Tanks
Causticizing Tanks,
Storage Tanks
Internal Floating Roof Tanks
Fuel Storage Tanks
Condensate Surge Tanks
Ground Suction Tanks
Molten Sulfur Tanks
Acid Tanks
Water Tanks
Dry Product Silos &
Stacksthroughout the region
Industrial ASME Pressure Vessels ASME Section VIII Pressure Vessels, for all the industries we serve.
Basic features:
1- Determine the comparative failure of electronic cards. (VI Chart)
2- Comparative tests of memory or defect detection.
3- Dual-Channel Digital PC Oscilloscope.
4- -5... +5V Analog voltage output (2,5 mV sensitiveness).
5- 0.2... 25KHz Square wave signal output.
6- The equivalent circuit diagram.
7- Resistors, capacitors and diodes valuation.
Other features:
1- Nearly the same size as a mobile phone, and easy to carry.
2- A precise measurement and signal applications with 12 bit ADC and DAC.
3- English, easy to use software.
4- Free internet publishing when program is refreshed.
5- USB without external power supply.
6- Easier failure detection capability by using the feature of producing the equivalent circuit diagram and reading the value of the material through the card without dismantling the material.
7- Performs failure detection without giving power to electronic card.
Dimensions:75 mm Width
:40 mm Height
:20 mm Deep
Weights: 258 gram With all accessories.
Safety machine.
*It slicers 250 gram bread up to 3 kg.
*Automatically stops after slicing.
*The difference between other machines has no risk.
*While slicing the cover prodects our fingers from the blades.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads.
*Avaible thickness cut size is 8 mm from desired value.(not adjustable)
*24 V Control Panel
*Has 2 years guarantee for production and parts defects.
Technical Features
Width: 700mm
Lenght: 730mm
Height: 1350mm
Weight: 171 kg
Power:0,55kw.
Safety and semi automatic machine.
*It slicers 250 gram bread up to 1, 5 kg.
*Automatically stops after slicing.
*The difference between other machines has no risk.
*While slicing the cover prodects our fingers from the blades.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads.
*Avaible thickness cut size is 8 mm from desired value.(not adjustable)
*24 v control panel
*Has 2 years guarantee for production and parts defects.
ench top bread slicing machine is ergonomic dizayned for small enterprices.
*It slicers 250 gr bread up to 1,5 kg bread.
*Automatically stops after slicing
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads
*Avaible thickness cut size is 8 mm from desired value.(not adjustable)
*It is prouced with standart electrostatic kiln dyed optional stainless body
*Has 2 years guarantee for prouduction and parts defects.
Dimenions
Capacity:500/hour
Width:740mm
Lenght:680mm
Height:805mm
Weight:98 kg
Power:0,37kw .
Reactors are designed, manufactured and supplied in accordance
with GOST R 52630 : 2006, OST 26.291â??94 and/or EN 13445 4:2002, ASME Section VIII Div.1&2. Criteria for selection of materials for manufacturing of
reactor shells and piping are based on rich practical experience of AEM specialists in the sphere of oil refining, chemical and power units. Vessel designs may be complemented with other elements depending on input technical requirements and process parameters as defined at design stage
Technical specifications
Diameter: up to 5000 mm Nominal
pressure: up to 20 MPa
Wall thickness : up to 300 mm
Design fluid temperature: up to 550C
Material: single metal plated with corrosion resistant material, type
08�¥18�?10�¢, 0813, or other as required by technical design
Internals UOP, AXENS, RIFING, etc.
Service life : 30 years
Slicing is made in the desired speed through band speed adjustment.
It is not proper for single slicing on the bench.
Height can be adjusted in accordance with the bigness of bread.
Machine is equipped with a packaging apparatus with fan to open the sacket as for packaging the sliced breads.
Sliced breads can easily be pushed by hand into the sacket that is opened by air.After putting the breads in, the sacket is taken apart and the sacket down is again opened by air.
Slice thickness can be adjusted from 8 mm up to desired value.
It is produced with standart electrostatic kiln dyed and optional stainless body.
It is easy to carry through the wheels.
Capacity:1500/hour
Designed to meet slicing and packaging processes in the companies with high capacities.
*Breads placed on the band push each other and a continuous slicing is provided.
*Slicing is made in the desired speed through band speed adjustment.
*It is not proper for single slicing on the bench.
*Height can be adjusted in accordance with the bigness of bread.
*Machine is equipped with a packaging apparatus with fan to open the sachet as for packaging the sliced breads.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads
*Sliced breads can easily be pushed by hand into the sachet that is opened by air. *After putting the breads in, the sachet is taken apart and the sachet down is again opened by air.
*Slice thickness can be adjusted from 8 mm up to desired value.
*It is produced with standard electrostatic kiln dyed and optional stainless body.
*It is easy to carry through the wheels.
*24 V Control Panel
*Has 2 years guarantee for production and assembly defects
TECHNICAL FEATURES
CAPACITY:1500/BREAD A HOUR
WIDTH:1180mm
LENGHT:1760mm
HEIGHT:1300mm
WEIGHT:298kg
POWER:1,59KW.
* 60% - 100% faster compared to other laser cutting machines. Axes equipped with Bosch - Rexroth linear motors and drivers reach to 120 m/min. speed and accelerations are 2 G on Y, 1,5 G on X axes
* Cuts thin materials 3 times faster compared to Co2 lasers and energy consumption is simultaneously lower
* 70% energy save by fiber optic laser technolohy is plant friendly.
* There is no need for laser-mix gas which is used Co2 laser cutting machines as there is diode technology is used for Fibermak.
* There is no need for optical components like beam path, folding mirror and quartz tube etc. as laser transmitting is done by fiber cable
* You can make production 24 hours a day and may save 50% per each costs
* You can prevent from production faults by automation in your premises
* You save from moulds and apparatuses.
* You may cut aluminium, copper, brass and other reflecting materials precisely with smooth surface quality. (You may reflecting materials such as aluminium, copper, brass, etc. Precisely and by smooth surface quality)
* FIBERMAK has strong frame, equipped with worldwide well known, quality and long life, quality components and designed to work accurately and continously even at hard conditions.
* Fast and high quantity production capacitated ERMAKSAN reflects this advantage as price to its customers. Creative designs with always highest level technology and quality are the main principles.
EFFICIENT
High cutting speeds with integrated distance sensorShort Conversation times with fast hanging of focal lenghtsOptimized cutting gas flow FLEXIBLE
Cutting of different material thicknesses2D cuttingFocal lenght tailored to your applicationAll media connections located in upper part USER FRIENDLY & SAFE
Simple and safe cartdridge replacement system with TCP retentionSast change of protective glassMotorized focal position adjustment (optional)Temperature monitoring of the sensor insertCartdridge monitoring for presenceMagnetic breakaway coupling
POWER AUTOMATION CONTROLLER
Power Automation CNC control with integrated inputs and outputs
The open, browser-based human machine interface PA HMIThe PA 8000 LW CNCThe Pa dongle which includes all needed software functions for fiber cuttingThe I/O module PAMIO which provides 4 analog in - and outputs
Ermaksan combining its 30 years press brake manufacturing experience with latest technologies, presents new generation Evolution series hybrid press brakes.
Fast, silent, precise, environmentally friendly and energy saving EVOLUTION series press brakes provides faultless bending of small parts even at different points by its high repetition and bending precision features.
Hydraulic pistons are being driven by AC servo motors without proportional direction valves on Evolution series hybrid press brakes. No need to positioning valves means more precision and less maintenance. And there is no pressure loss. While the pump is working contiuously all the day ordinary press brakes, there is onlny energy consumption when the operator pushes the foot pedal and moves the top beam for bending on Evolution series hybrid press brakes. As there is no pressure loss, energy i.e. bending power is at highest level. Oil level is also reduced 80%. there is no oil heat up and the oil has long life-time
- Near silent working (63dB). Most silent one amongst the sheet metal bending machines.
- Minimum 60% average active energy save and energy loss minimized sheet metal bending machine.
- Energy consumptions:
- 95% less while standing ready for bending
- 95% less while free fall movement of the beam
- Minimum 50% less while bending. When the thickness of sheet decreases, energy save increases. Furthermore when the resistance of sheet has been get overcome during bending, energy consumption reduces immediately.
- 84% less while ironing if waiting time described in the bending program
- 70% less while return movement of the beam
As the oil doesn’t heat up, super accurate repeatability feature maximized press brake.
- High bending precision 0.01 mm.
- Faultless bending of small parts even at different points.
- 80% less oil volume and less frequent oil changes. Moreover there is no need to change oil at least 5 years.
- 3 times longer life-time for system and pomp. High quality equipments and system’s working during only motion guarantee this.
- Fast and rapid working press brake by servo motor and high efficiency pump dynamism.
- There is no continuous oil circulation as the pump doesn’t work all the day, thus the oil doesn’t heat up.
- Bending power is at highest level by no pressure loss as there are no proportional valves.
- Y1 and Y2 axes have independent oil tanks. Thus, the maintenance will be realized at only one side if any brake-down appears. Therefore, servicing will be easier.
