Find Verified Wine Bar Set Suppliers, Manufacturers and Wholesalers

Our company is active in the fields of spine and brain surgery products. Our company has proved its product quality and its success in applications and it carries out the production of spinal group products of the leading companies in its sector. For details information please contact us

Product Code Product Description

PRS-CM0050/A Vicat Test Set EN

PRS-CM0050/E Vicat Test Set ASTM

PRS-CM0051 Vicat Apparatus (Frame)

PRS-CM0052/E Vicat Mould EN Base ID 80 mm, Top ID 70 mm, Height 40 mm

PRS-CM0052/A Vicat Mould ASTM Base ID 70 mm, Top ID 60 mm, Height 40 mm

PRS-CM0053/E Initial Vicat Needle EN 1.13 mm dia.

PRS-CM0053/A Vicat Needle ASTM 1 mm dia.

PRS-CM0054 Final Vicat Needle EN 1.13 mm dia.

PRS-CM0055 Consistency Plunger 10 mm dia.

PRS-CM0056 Supporting Glass Plate

PRSTAS-0121 Transfer Dish for PRSTAS -0120 and PRS-CM0050

PRSGT-1305 Glass Thermometer Max. 110°C

PRSC-CM0057 Additiniol Weight, 700 gr, EN 480-2

STANDARDS : EN 196-3, 480-2; ASTM C187, C191; AASHTO T129, T131
The Vicat Test Set is used for the determination of the setting time and consistency of cement by Vicat Method.
PRSTAS -0121 Transfer Dish which is used as a Water Wessel EN, for layering the vicat mould under water.
The Vicat Test Set is supplied complete with;
Vicat Mould
Initial and final Needles (for EN )
Vicat Needle (for ASTM)
Consistency Plunger
Supporting Plate
Glass Thermometer
Transfer Dish (for EN)

Dimensions 150x190x318 mm
Weight (approx.) 3 kg

Product Code Product Description

PRS-AS0630 Vibratory Compactor Set, 220-240 V 50 Hz

PRS-AS0085 P.R.D. Split Mould and Base Plate

STANDARDS : EN 12697-32, 12697-9, 12697-10

The PRS-AS0630 Vibratory Compactor Set is used to prepare test specimens of bituminous mixtures by using the vibratory compaction technique.

The PRS-AS0630 Vibratory Compactor Set consists of a Vibrating Hammer (220-240 V 50 Hz), Supporting Frame, 102 mm dia. Small and 145 mm. dia. Large Tamping Foots and 300 mm Shank.

P.R.D. (Percentage Refusal Density) Split Mould is split verticially on one side, attached to the base plate with clamp. Plated against corrosion.

The split mould and base plate should be ordered separately.
The set is also used for compaction of proctor and CBR soil specimens.

The Vibratory Compactor Set is supplied complete with;
â?¢ Vibrating Hammer
â?¢ Supporting Frame
â?¢ Small Tamping Foot, 102 mm dia.
â?¢ Large Tamping Foot, 145 mm dia.
â?¢ Shank, 300 mm, long

Dimensions 510x300x1120 mm (complete set)

Weight (approx.) 75k (complete set)

Power 1150 W (vibrating hammer)

Sieve Test Set

PRS-B0518 Sleve Segregation Test Set

PRSG-4PC0050/Y Sieve Ã? 300x75 mm 5 mm Square Aperture

PRSG-4002/Y Pan Ã? 300x75 mm

STANDARDS : EN 12350-11
The PRS-B0518 Sieve Segregation Test Set is used for determining the resistance to sieve segregation of Self Compacting Concrete. The Sieve has 5 mm square apertures with a frame diameter of 300 mm conforming to ISO 3310-2 standard. Supplied complete with a Pan.

Dimensions 350x350x250 mm

Weight (approx.) 2,5 kg

Slump Test Set

Product Code Product Description

PRS-B0400 Slump Test Set

PRS-B0402 Slump Cone

PRS-B0404 Slump Base Plate 500x500x60 mm with Handle

PRS-B0406 Slump Funnel, Galvanized Steel

PRS-B0408 Tamping Rod Ã? 16x600 mm

PRS-B0410 Tamping Rod Ã? 10x300 mm

PRSGH-1695 Rubber Mallet

PRSGM-0380 Steel Ruler 300x1 mm
PRSGH-1605 Round Scoop, Medium

STANDARDS : EN 12350-2

The Slump test method is used for the determination of the consistency and workability of fresh concrete. The PRS-B0400 Slump Test Set is supplied either galvanized or paint coated to prevent corrosion.

The Slump Test Set are supplied complete with;

� Slump Cone Top Dia: 100 ±2 mm / Base Dia: 200 ±2 mm / Height: 300 ±2 mm
â?¢ Slump Base Plate 500x500x60 mm with Handle
â?¢ Slump Funnel, Galvanized Steel
â?¢ Tamping Rod Ã? 16x600 mm
â?¢ Rubber Mallet
â?¢ Steel Ruler 300x1 mm

Dimensions 550x600x250 mm (packed)

Weight (approx.) 6 kg

Product Code Product Description

PRS-ZE0270 Hydrometer Test Set

PRS-ZE0272 Soil Dispersion Mixer, 220-240 V 50-60 Hz

PRS-ZE0273 Hydrometer Bath, 220-240 V 50-60 Hz

PRS-ZE0274 Hydrometer 151H

PRS-ZE0275 Hydrometer 152H

PRS-ZE0276 Hydrometer Jars, 1000 ml

PRSGC-0900 Sodium Hexametaphosphate, 1kg

STANDARDS : ASTM D422; AASHTO T88

Hydrometer Test Set is used to determine the particle size distribution of very fine materials such as silt and clay.
The soil dispersion mixer for hydrometer test method, operates at over 13,000 r.p.m, includes dispersion cup, stirring paddle, automatic switch-on by positioning bowl, 100 W power consumption
The hydrometer bath, circulation unit, ambient to 35°C working temperature, 50 L capacity tank with 8 pcs. sedimentation cylinder capacity.

152H Hydrometer should be ordered separately.

The Hydrometer Test Set is supplied complete with;
Dispersion mixer
Hydrometer bath
Hydrometer, 151H, 1pcs.
Sodium hexametaphosphate 1 kg,
Sedimentation cylinder, 1000 ml, 6 pcs.
Heater,
Circulation unit
Rubber stopper for sedimentation cylinder
Beaker, 600 cc

151 H Hydrometer 11 â?? Length 0,995-1,038 g/ml Ä°n 0,001 g/ml division

152H Hidrometre 11â?� Lenght 5 - 60 g/L in 1g/L Ä°n 1g/L division

Dimensions 330x630x450 mm

Weight (approx.) 20 kg

Product Code Product Description

PRS-ZETBS Hand Auger Set

Hand auger equipment is extremely suitable for soil research. A comprehensive set for augering all types of soil down to a depth of 5 meters.

The set comprises 4 edelman augers of various types has one for each of them ; riverside auger ( 8 cm diam), auger for stony ground, spiral auger, suction auger, bailer, gouge auger with bent spatula and the normal handle and extension pieces.

Also they have a sounding device on efor each of them ; 5 meters measuring tape, a paire of gloves, nylon headed hammer, brush, shovel and complete in an hammock transport case (1150x150x300 mm) with zip fastener.

Another art that has developed in Anatolia paralel to architecture is tilework and ceramics. The first use of it in Anatolia is by Seljuk artists, they have especially been successful in portraits of animals. The artwork of tiles that has begun in 14th century in znik, in 15th century in Kntahya and in 17th century in anakkale has formed a rich mosaic by bringing together the colors, designs and forms unique to itself and brought new interpretations to Ottoman period of tile and ceramic arts. Between 14th-19th centuries Turkish artwork of tiles and ceramics has become famous worldwide through its creative workmanship. This serie of products are reproduced today according to their traditional specifications and brought to a new dimension by transforming Iznik Tiles to functional works of art. znik Tiles containing Quartz (%80) are completely handcrafted and will be important elements of tomorrows special collections.

B. Braun offers a holistic infusion therapy concept which combines high-quality products with intelligent technologies and services

Product Code Product Description

PRS-ZE1320 Falling Head Permeability Set

PRS-ZE1322 Falling Head Permeability Cell 100 mm dia.

PRS-ZE1324 Wooden Stand with 4 Manometer Tubes

PRS-ZE1326 Soaking Reservoir Tank

STANDARDS : BS 5930:1999, / 1377, ASTM 46 / 47

The PRS-ZE1320 Falling Head Permeability Set is used to study the behaviour of soil, particularly finegrained soils such as clay-like or silty soils, with respect to water flow.
The PRS-ZE1322 Falling Head Permeability Cell is manufactured from plated steel with an inside diameter of 100 mm.

The PRS-ZE1324 Wooden Stand is fitted with 4 glass Manometer Tubes of each 1500 mm long with inside diameters of about 21 mm, 12 mm, 5 mm and 3.5 mm. All tubes have connection valves.

The PRS-ZE1326 Soaking Reservoir Tank is manufactured from plated steel with an over-flow tube and is used for containing the permeability cell during the test.
Optional Equipment For De-Airing Water should be ordered separately.

The PRS-ZE1320 Falling Head Permeability Set is supplied complete with;
â?¢ Ã? 100 mm Falling Head Permeability Cell
â?¢ Wooden Stand with 4 manometer tubes
â?¢ Soaking Reservoir Tank
â?¢ 3 m Hose

Product Code Dimensions Weight (approx.)

PRS-ZE1322 150x150x260 mm 3 kg

PRS-ZE1324 230x100x1700 mm 6.6 kg

PRS-ZE1326 320x320x250 mm 3.6 kg

Product Code Product Description

PRS-AS0013 Reflux Extraction Test Set 1000 g, 220-240 V 50-60 Hz

PRS-AS0014 Reflux Extractor Jar 1000 g

PRS-AS0015 Reflux Extractor Condenser 1000 g

PRS-AS0016 Reflux Extractor Conical Wire Screen 500 g

PRSGH-1830 Iron Wire Gauze 120x120mm

PRS-AS0020 Reflux Extraction Test Set 4000 g, 220-240 V 50-60 Hz

PRS-AS0021 Reflux Extractor Jar 4000 g

PRS-AS0022 Reflux Extractor Condenser 4000 g

PRS-AS0023 Reflux Extractor Conical Wire Screen 2000 g

PRS-AS0024 Filter Paper Ã? 400 mm (50 pcs./pack) for PRS-AS0013 and PRS-AS0020

PRSGH-1835 Iron Wire Gauze 160x160mm

STANDARDS : ASTM D2172; AASHTO T164 B

The Reflux Extractor is used for the quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples. The bitumen content is calculated by difference from the weight of extracted aggregates, moisture content and ash from an aliquot part of the extract.

The Reflux Extraction Test Set is supplied complete with;
Cylindrical Glass Extractor Jar
Two Wire Mesh Cones with Interlocking Frames
Water Condenser with Inlet/Outlet Tubes
Filter Paper, 50 pcs./pack
Hot Plate
Iron Wire Gauze (PRSGH-1830 with PRS-AS0013 , PRSGH-1835 with PRS-AS0020)

Dimensions

PRS-AS0013 260x260x620 mm

PRS-AS0020 260x260x620 mm

Weight (approx.)

PRS-AS0013 6 kg

PRS-AS0020 8 kg

Product Code Product Description

PRS-ZE0250 Plastic Limit Test Set

PRS-ZE0252 Plastic Limit Reference Rod Ã? 3x100 mm

PRS-ZE0254 Plastic Limit Plate 300x300x5 mm, Glass

PRSGH-1433 Porcelain dish, 120 mm dia.

PRSGG-2170 Moisture content tin with lid, Aluminum, Ã?:75 mm h:30

PRSGH-1495 Spatula, small, length:120 mm

STANDARDS : ASTM D4318; AASHTO T90; BS 1377:2; UNE 103-104; UNI 10014

The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking.

The Plastic Limit Test Set is supplied complete with
Glass Plate, 300x300x5 mm
Steel Reference Rod
Moisture Content Tins, Ã?:75 mm h:30, 6 pcs.
Porcelain Mixing Dish, 120 mm dia.
Spatula, 120mm
Carrying Case

Dimensions 360x370x180 mm

Weight (approx.) 3 kg

Product Code Product Description

PRS-ZE0950 Sand Cone Set 6.5"

PRS-ZE0960 Sand Cone Set 12"

PRS-ZE0952 Plastic Sand Jar 5 L, for PRS-ZE0950

PRS-ZE0962 Density Cylinder, 12"

STANDARDS : ASTM D1556; AASHTO T181, T191

The PRS-ZE0950 and PRS-ZE0960 Sand Cone Sets are used for the determination of the degree of compaction on site. PRS-ZE0950 includes double cone, plastic sand jar and metal tray with flanged hole.

PRS-ZE0962 Density Cylinder is used for determining in place density of compacted base courses containing large sizes of coarse aggregates.

Product Code Dimensions Weight (approx.)
PRS-ZE0950 300x300x550 mm 4 kg
PRS-ZE0960 600x600x650 mm 15 kg
PRS-ZE0962 470x320x260 mm 10 kg

Product Code Product Description

PRS-ZE0630 Vibratory Compactor Set, 220-240 V 50 Hz

PRS-ZE0750 CBR Type Mould BS (modified proctor) Vibrating Hammer Mould EN

PRS-ZE0768 C Spanner for PRS-ZE0750, 2 pcs

PRS-ZE0770 Assembly Tool for Base Plate for PRS-ZE0750

STANDARDS: EN 13286-4; BS 1377:4 / EN 12697-9, 12697-10, 12697-32

The PRS-ZE0750 Vibratory Compactor Set is used to prepare the test specimens of road base and sub base materials by using the vibratory compaction technique. The specimens prepared from road base and sub base materials is used for the proctor and CBR tests.

The set is also used for preparing the test specimens of bituminous mixtures
PRS-ZE0750 mould with base plate and extension collar should be ordered separately and also when ordering PRS-ZE0750, PRS-ZE0768 and PRS-ZE0770 should be ordered separately for assembling and dissambling.

The Vibratory Compactor Set is supplied complete with;

Vibrating Hammer
Supporting Frame
Small Tamping Foot, 102 mm dia.
Large Tamping Foot, 146 mm dia.
Shank, 300 mm

Dimensions 510x300x1120 mm

Weight (approx.) 75 kg (complete set)

Power 1150 W (vibrating hammer)

Product Code Product Description

PRS-ZE0900 Sand Replacement Test Set 100 mm BS

PRS-ZE0901 Sand Pouring Cylinder 100 mm dia. for PRS-ZE0900

PRS-ZE0902 Calibration Container for PRS-ZE0900

PRS-ZE0903 Metal Tray for PRS-ZE0900

PRS-ZE0910 Sand Replacement Test Set 150 mm BS

PRS-ZE0911 Sand Pouring Cylinder 150 mm dia. for PRS-ZE0910

PRS-ZE0912 Calibration Container for PRS-ZE0910

PRS-ZE0913 Metal Tray for PRS-ZE0910

PRS-ZE0920 Sand Replacement Test Set 200 mm BS

PRS-ZE0921 Sand Pouring Cylinder 200 mm dia. for PRS-ZE0920

PRS-ZE0922 Calibration Container for PRS-ZE0920

PRS-ZE0923 Metal Tray for PRS-ZE0920

STANDARDS : BS 1377:9, 1924:2
The Sand Replacement Test Set is used for the determination of the degree of compaction on site. The Complete set consists of a pouring cylinder, calibration container and tray. The sand pouring cylinder is made of cast aluminum and precisely machined; the calibration container and tray are made of plated sheet steel. The test set is available in three different sizes.

Product Code Dimensions Weight (approx.)
PRS-ZE0900 300x300x440 mm 8 kg
PRS-ZE0910 300x300x500 mm 14 kg
PRS-ZE0920 500x500x660 mm 27 kg

Product Code Product Description

PRS-ZE1300 Constant Head Permeability Set for Ã? 80 mm cell

PRS-ZE1301 Constant Head Permeability Set for Ã? 120 mm cell

PRS-ZE1302 Constant Head Permeability Cell, 80 mm dia.

PRS-ZE1303 Constant Head Permeability Cell, 120 mm dia.

PRS-ZE1305 Wooden Stand with 3 Manometer Tubes

PRS-ZE1308 Constant Level Water Tank, 7 L.

PRSA-0645 Tamping Rod Ã? 8x300 mm

STANDARDS : BS 1377:5

The PRS-ZE1300 and PRS-ZE1301 Constant Head Permeability Set are used to study the behaviour of soil, relatively coarse-grained soil such as sands and gravel, in its natural conditions with respect to water flow.

Two models are available according to cell dimensions. The cells have an acryilic glass body with 3 pressure points at different level.

PRS-ZE1305 stand is fitted with 3 glass manometer tubes each being 1000 mm long.
PRS-ZE1308 Constant Level Tank 7 L, made of transparent plastic, is used to provide constant water level in the manometer tubes.

Optional Equipment For De-Airing Water and Tamping Rod should be ordered separately

The Constant Head Permeability Set is supplied complete with;
â?¢ Ã? 80 mm or Ã? 120 mm Permeability Cell with Pressure Points at 3 different levels and 2 pcs. Wire Gauze ( fit for the prefered cell dia. )
â?¢ Wooden Stand with 3 manometer tubes
â?¢ 3 m Hose

Product Code Dimensions Weight (approx.)

PRS-ZE1302 140x220x420 mm 3.5 kg

PRS-ZE1303 180x250x640 mm 7 kg

PRS-ZE1305 220x70x1700 mm 5.6 kg

PRS-ZE1308 300x200x250 mm 3 kg

PRS-A0500/E Sand Equivalent Test Set, EN Model

PRS-A0500/A Sand Equivalent Test Set, ASTM Model

PRS-A0502/E Sand Equivalent Measuring Two Graduated Cylinder, EN

PRS-A0502/A Sand Equivalent Measuring Graduated Cylinder, ASTM

PRSGH-1425 Moisture Content TinSand Equivalent Measuring Tin with Lid, Aluminium, Ã?:55 mm x h:35 mm

PRS-A0506 Sand Equivalent Siphon Assembly

PRS-A0507/E Sand Equivalent Test Plunger Assembly,EN

PRS-A0507/A Sand Equivalent Weighted Foot Assembly,ASTM

PRS-A0515 Washing and Flocculating Solution (Stock Solution), 1 lt

The Sand Equivalent test set is used to determine the fines of aggregates. The test set is supplied with 4 transparent acrylic plastic measuring cylinders, siphon assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube) 5 lt. plastic can, weighted foot assembly, measuring can, wide-mouth funnel, and ruler.

PRS-A0515 Washing and Flocculating (Stock Solution) should be ordered seperately.

The Sand Equivalent Test Set is supplied complete with;

â?¢ Transparent Graduated Acrylic Plastic Measuring Cylinder, 4 units for PRS-A0500/A,

â?¢ Transparent Acrylic Plastic Measuring Cylinder - 4 units for PRS-A0500/E,

â?¢ Siphon Assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube,

â?¢ Plastic can - 5 lt.

â?¢ Weighted Foot Assembly,

â?¢ Measuring Tin,

â?¢ Wide-Mouth Funnel,

â?¢ Ruler,

â?¢ Special Carrying Case,

Dimensions 400x550x150 mm

Weight (approx.) 4,6 kg

Product Code Product Description

PRS-B0510Concrete Flow Table Test Set

PRS-B0512Flow Cone for PRS-B0510

PRS-B0513Wooden Tamper 40x40x335 mm

The test set is used for concrete mixes of high workability and determines flow index as an arithmetic mean of the diameter of the specimen after working on a flow table.

The apparatus consists of a double steel table, an upper table measuring 700x700 mm and hinged at one side to the lower table.

The top table is inscribed and all parts are protected against corrosion. The stainless steel cone has a 130 ±2 mm top diameter, 200 ±2 mm base diameter and 200 ±2 mm height and 1.5 mm thickness.

Dimensions700x850x300 mm

Weight (approx.)40 kg

The Concrete Flow Table is supplied complete with;
â?¢Flow Cone
â?¢Wooden Tamper

RYT-4220 : Plate Bearing Test Set 200 kN Capacity

RYT-4222 : Plate Bearing Test Set 500 kN Capacity

Plate Bearing Test Set is performed for the determination of the bearing capacity of a soil in-situ on road constructions, foundations, road subgrades, airport and highway pavements. A wide range of plate bearing test equipment are available, together with many accessories according to the different Standards and specific enduser needs. All test sets supplied complete with 1,5 m long flexiable hose with quick release coupling.

The RYT-4220 Plate Bearing Test Set 200 kN is supplied complete with:

Dimensions : 650x350x600 mm

Weight : 130 kg

200 kN Capacity Piston Assemly

Hydraulic Hand Pump,

Pressure Transducer,

Datum Bar - 2.4 m long , 3 pcs.

25 mm travel x 0.01 mm digital dial gauges with dial supports,

300 mm and 450 mm dia. loading plates,

The RYT-4222 Plate Bearing Test Set 500 kN is supplied complete with:

500 kN Capacity Piston Assemly
Hydraulic Hand Pump,
Pressure Transducer,
Datum Bar - 2.4 m long , 3 pcs.
25 mm travel x 0.01 mm digital dial gauges with dial supports,
600 mm and 760 mm dia. loading plates

PRS-ZE1200 : Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 200 kN

PRS-ZE1201 : Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 500 kN

PRS-ZE1202 : Piston Assemly, 200 kN capacity, for Plate Load Bearing Test Sets

PRS-ZE1203 ; Piston Assemly, 500 kN capacity, for Plate Load Bearing Test Sets

PRSGE-3800 : Hydraulic Hand Pump, 700 bar.

PRS-ZE1204 ; Loading Plate Ã? 300 mm for PRS-ZE1200

PRS-ZE1205 : Loading Plate Ã? 450 mm for PRS-ZE1200

PRS-ZE1206 ; Loading Plate Ã? 600 mm for PRS-ZE1201

PRS-ZE1207 ; Loading Plate Ã? 760 mm for PRS-ZE1201

PRS-ZE1220 : Plate Loading Test Set, with Displacement Transducers and Data Logger, 200 kN

PRS-ZE1221 : Plate Loading Test Set, with Displacement Transducers and Data Logger, 500 kN


This test method is used to estimate the bearing capacity of a soil under field loading conditions for a specific loading plate and depth of embedment (ASTM D1194). It is also used for load tests of soil and flexible pavement components for use in evaluation and design of airport and highway pavements.

PRS-ZE1200 Plate Loading Test Set consists of a 200 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 300 mm and 450 mm dia. loading plates,


PRS-ZE1201 Plate Loading Test Set Set consists of a 500 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 600 mm and 760 mm dia. loading plates.


All test sets supplied complete with 1,5 m long flexiable hose with qu

Product Code Product Description

PRS-ZE0024 Hand Operated Auger Boring Set

PRS-ZE0026 Extension Rod for PRS-ZE0024 , 1 meter

PRS-ZE0024 Hand Boring and Sampling Set for augering down to a depth of 5 meters.
The PRS-ZE0024 Hand Operated Auger Boring Set consists of a T-Handle with 1 m Rod, 80 mm, 100 mm and 150 mm diameter Auger Heads.

Extension rods should be ordered separately.

Dimensions 1100x200x200 mm

Weigth (approx.) 5 kg

Product Code Product Description

PRS-AS0135 Water in Bituminous Materials Test Set (Dean-Stark Method) 220-240 V 50 Hz

STANDARDS : ASTM D95, D244; AASHTO T55, T59; IP 74/77; CNR No.101; NLT 123

The PRS-AS0135 test set is used for determining the water content of bituminous materials. The test is based on distilling the sample with a volatile solvent. The material to be tested is heated under reflux with a water immiscible solvent, which distills together with the water in the sample. Condensed solvent and water are continuously separated in a trap, the water settles in the graduated section of the trap, and the solvent returns to the still.

Test Set Consists Of;
Electric Heater with Thermo Regulator
Glass Condenser
Glass Receiver
Glass Still, 10 ml

Dimensions 200x200x450 mm
Weight (approx.) 4 kg
Power 250 W

PRS-A300 Flakiness Index Sieve Set BS

PRS-A301 Flakiness Index Sieve BS 4.9x30 mm slot size

PRS-A302 Flakiness Index Sieve BS 7.2x40 mm slot size

PRS-A303 Flakiness Index Sieve BS 10.2x50 mm slot size

PRS-A304 Flakiness Index Sieve BS 14.4x60 mm slot size

PRS-A305 Flakiness Index Sieve BS 19.7x80 mm slot size

PRS-A306 Flakiness Index Sieve BS 26.3x90 mm slot size

PRS-A307 Flakiness Index Sieve BS 33.9x100 mm slot size

Aggregate particles are considered as flaky when their thickness is less than 0.6 of their mean sieve size. Aggregate to be classified is separated into seven sieve fractions from 6.3 to 63 mm and each fraction is examined separately.

The dimensions of each sieve comply with the relevant International Standard, manufactured from heavy gauge steel sheet and coated with electrostatic paint. The accuracy of the slot size is better than 0.1 mm.

PRS-A300 Flakiness Index Sieve Set consists of 7 sieves.

For sample preperation 6.3, 10, 14, 20, 28, 37.5, 50 and 63 mm aperture sizes test sieves should be ordered seperately.

Product Code Slot Size (wxl) Weight (approx.) Dimensions
PRS-A300 4.9x30 mm 1.5 kg 300x220x80 mm
PRS-A301 7.2x40 mm 1.6 kg 320x240x80 mm
PRS-A302 10.2x50 mm 1.9 kg 300x220x80 mm
PRS-A303 14.4x60 mm 2.0 kg 360x260x80 mm
PRS-A304 mm 2.2 kg 390x280x80 mm
PRS-A305 26.3x90 mm 2.6 kg 420x300x80 mm
PRS-A306 33.9x100 mm 2.9 kg 470x320x80 mm

Traditional Turkish Hand Crafts has formed a rich mosaic by bringing together its genuine values with the cultural heritage of the different civilizations which were coming from the thousand years of history of the Anatolia.
The handicrafts made with copper, as well as the metals such as brass, gold, silver, are tried to be kept alive today by using high quality workmanship and various designs.
Turkish Coffee is the name given to a type of coffee whose preparation and brewing techniques were invented by the Turks. It has a unique taste, froth, aroma, brewing technique and presentationà in other words it has its own identity and tradition.

The first coffee was made in the Arabian Peninsula by boiling coffee cherries. The new method invented by the Turks revealed coffee's true flavour and peerless aroma. The Turks introduced coffee to Europe where for many years it was prepared and consumed as Turkish Coffee.

Turkish Coffee is made from high quality arabica coffee beans from Central America and Brazil that are blended and carefully roasted, then very finely ground. The coffee is mixed with water and the desired amount of sugar and cooked in a "cevze", or Turkish coffeepot. The coffee is served in small cups. The coffee must be left to stand for a short time after serving to allow the grounds to settle at the bottom of the cup.

Love, success, money, fortune: the art of reading coffee grounds is as old as coffee itself. Coffee fortune telling was born out of Turkish Coffee and is an inseparable part of the pleasure and conversation associated with coffee.

This ritual spread to Europe at the end of the 17th century when it became fashionable in Paris, from where it spread to Austria, Hungary and Germany. The Coffee Set made of copper is a modernized version of traditional offer.

Product Code Product Description

PRS-A0320 Grid Sieve Set (Flakiness Index Sieve Set EN)

PRS-A0321 Grid Sieve (Flakiness Index Sieve EN) 2.5 mm

PRS-A0322 Grid Sieve (Flakiness Index Sieve EN) 3.15 mm

PRS-A0323 Grid Sieve (Flakiness Index Sieve EN) 4 mm

PRS-A0324 Grid Sieve (Flakiness Index Sieve EN) 5 mm

PRS-A0325 Grid Sieve (Flakiness Index Sieve EN) 6.3 mm

PRS-A0326 Grid Sieve (Flakiness Index Sieve EN) 8 mm

PRS-A0327 Grid Sieve (Flakiness Index Sieve EN) 10 mm

PRS-A0328 Grid Sieve (Flakiness Index Sieve EN) 12.5 mm

PRS-A0329 Grid Sieve (Flakiness Index Sieve EN) 16 mm

PRS-A0330 Grid Sieve (Flakiness Index Sieve EN) 20 mm

PRS-A0331 Grid Sieve (Flakiness Index Sieve EN) 25 mm

PRS-A0332 Grid Sieve (Flakiness Index Sieve EN) 31.5 mm

PRS-A0333 Grid Sieve (Flakiness Index Sieve EN) 40 mm

PRS-A0334 Grid Sieve (Flakiness Index Sieve EN) 50 mm

STANDARDS :
It is used for the determination of the flakiness index of the aggregate.
Consisting of an electrostatically painted frame and 5 mm diameter stainless steel bars with apertures state below.
For sample preperation 4.5, 6.3, 8, 10, 12.5, 16, 20, 25, 31.5, 40, 50, 63, 80 and 100 mm aperture sizes test sieves should be ordered seperately.

We are manufacturer high quality affordable price furniture for you .

Every customer is special to us and customer satisfaction is a top priority. As a solution partner and natural consultant of our customers, it is our primary duty to provide excellent products and services by satisfying their expectations in the most economical and fast way in order to satisfy them at a higher level. Quality is an indispensable element of our life and the most important value of our corporate culture for our personal and corporate development. Our customers determine the criteria for our quality. Customer opinions and suggestions regarding our products and services are binding.

Our company, which has adopted the principle of reasonable price and honest working, works in a way that will not leave you in a difficult position in sales and after sales service by producing the easiest, most accurate and fast solutions to your problems and demands.

Product Code Product Description

PRS-CMA0050 Automatic Vicat Apparatus

STANDARDS : EN 196-3:2005; EN 13279-2 (GYPSUM);EN 480-2 /ASTM C187, ASTM C191

The Vicatronic apparatus, that is designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of cements or mortar pastes.Movements along X Y Z axes Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port Initial and final setting time (in 0.1 mm) Automatic cleaning of the needle Automatic stop and storage of measurements up to 50 tests.

Plunger for initial consistency Thermostatic baths (optional)

GLCD display for data input and diagram/test report.Printer for final test report and diagram

RS 232 serial port for PC connection Moulds and further needles have to be ordered separately, according to the various standards.

Power supply 220 V, 50 Hz, single phase.

Weight 40 kg.

L Shape Box Apparatus

Product Code Product Description

PRS-B0545 L Shape Box Apparatus

STANDARDS : EN 12350-9

The PRS-B0545 L Shape Box is used for determining the passing ability rate of freshly mixed self compacting concrete.

The distance between 12 mm diameter bars can be set between 41±1 mm or 59±1 mm.

L Shape Box is designed for ease of cleaning the vertical and horizontal hoppers.

The L Shape Box Apparatus is supplied complete with;
Filling Hopper
Base

Dimensions 300x1000x1350 mm
Weight (approx.) 35 kg

Testing Sieves

STANDARDS : EN 933-2; ISO 565, 3310-1, 3310-2; ASTM E11, 323

PARSROS offers a wide range of High Quality Testing Sieves which are used in all types of sieve testing applications, from sampling and classification of soils, aggregates and other powdered and granular materials. PARSROS testing sieves are of the highest quality to ensure consistent fit, accurate specifications and durable construction.

Woven Wire Cloth and Perforated Plate Sieves are supplied in 200 mm and 300 mm frame diameters in various nominal aperture sizes suitable for several applications and standards. Wet Washing Sieves are used for wet testing of various materials enabling to wash the fines through the sieve without losing any of the sample. Available in 200 mm diameter with 100 mm and 200 mm deep models.

All parts of testing sieves are manufactured from stainless steel. Receiving Pans and Lids are available in stainless steel with 200 mm and 300 mm diameters.

Product Code Product Description

PRS-ZE0235 Linear Shrinkage Mould

STANDARDS : BS 1377:2
The PRS-ZE0235 , Linear Shrinkage Mould is 140 mm long and 12.5mm radius and is used for the determination of the total linear shrinkage of soils, and indicates the plastic properties of soils with low clay content.

Dimesions 140x140x13 mm
Weight (approx.) 0,3 kg

Product Code Product Description

PRS-ZE0600 Standard Proctor Mould, ASTM

PRS-ZE0602 Standard Proctor Compaction Rammer,ASTM

PRS-ZE0604 Modified Proctor Mould, ASTM

PRS-ZE0606 Modified Proctor Compaction Rammer, ASTM

PRS-ZE0608 A Type Proctor Mould (Standard), EN

PRS-ZE0608/1 Steel Plate for The End Layer Compaction for PRS-ZE0608, EN

PRS-ZE0610 A Type Proctor Compaction Rammer (Low Energy-Standard), EN

PRS-ZE0612 B Type Proctor Compaction Mould (Modified), EN

PRS-ZE0612/1 Steel Plate for The End Layer Compaction for PRS-ZE0612, EN

PRS-ZE0614 B Type Proctor Compaction Rammer (Medium Energy-Modified), EN

PRS-ZE0615 1 Liter Mould (Standard Proctor), BS, TS 1900-1

PRS-ZE0616 2.5 kg Compaction Rammer, BS

PRS-ZE0750 CBR Type Mould, BS (Modified Proctor) Vibrating Hammer Mould BS, EN, TS 1900-1

PRS-ZE0618 4.5 kg Compaction Rammer, BS

STANDARDS: ASTM D 698, D 1557, D 558 ; AASHTO T 99, T180, T 134 ; EN 12386-2, 13286-4 BS 1377:4,1924:2

Moulds and rammers are used for determining the relationship between the moisture content and density of compacted soil. Made of plated steel, includes collar, mould body and base plate. Rammers are used to compact the soil sample in the Proctor Moulds and made of plated steel. Different models are available conforming to the relevant standards.

Product Code : Product Description

PRS-ZE0865 : In-situ CBR Test Apparatus

PRS-ZE0866 : Cutting Collar (edge) for PRS-ZE0865

PRS-ZE0867 : Conversion Frame

STANDARDS :

The PRS-ZE0865 -situ CBR Test Apparatus, 50 kN capacity,is used for the on-site determination of the bearing capacity of soils used in road construction.

The set consists of:
50 kN capacity mechanical jack with ball seating
50 kN capacity load ring
Analog penetration dial gauge (30 mm travel x 0.01 mm)
Adjustable dial gauge holder
CBR Penetration piston
Set of extension rods (2 pcs. 102 mm, 1 pcs. 305 mm and 1 pcs. 610 mm length)
Datum bar assembly with two stands
4.5 kg annular surcharge weight
4.5 Kg slotted surcharge weight
9 kg slotted surcharge weight
Vehicle bracket and wooden carrying case

The PRS-ZE0867 Conversion Frame is used to convert the IN-situ CBR test to a mechanical laboratory CBR test machine.

The system is easily assembled onto the conversion frame with the addition of some of the accessories included in PRS-ZE0865. The frame is used with the jack, load ring, CBR mould and penetration piston.

Steel bars

Sand Equivalent Shaker

Product Code Product Description

PRS-A0510 Sand Equivalent Shaker

PRS- A0510 Sand Equivalent Shaker is used for the uniform shaking of Sand Equivalent Measuring Cylinders, at a specified rate and stroke.

The shaker is supplied complete with a timer. The horizontal movement, cycle and shaking time can easily be adjusted on the shaker to comply with EN or ASTM standards.

The Sand Equivalent Shaker is supplied complete with;
Safety Cover (conforming with CE directives)
Timer

Vein Depth Setting
Skin Color Setting
Intensity Adjustable White Light
5 Different Projection Size Adjustment
6 Different Vein Color Adjustment
3.5'' TouchScreen for Easy Adjustment

1 set = 50pcs
3 layer

Certofix Safety Trio
Triple-lumen catheter set for catheterization of the vena cava according to the Seldinger method with the possibility of ECG based Central Venous Catheter tip placement and position control
Picture of product
Certofix Safety Trio
Set consists of:

Product Code Product Description

PRS-KA0552 Manual (Hand Operated) Pressure System for Lateral Pressure in Hoek Triaxial Cell

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRSC-0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407
The manual pressure system is used for maintaining the constant lateral pressure in the Hoek triaxial cells and consists of a hydrolic hand pump with oil reservoir (PRSGE-3800), a precision LPI digital readout unit (PRS-B4920), a pressure transducer (PRSGM-0110) and a 3 m long flexible hose with quick release coupling.
The manuel pressure system is used with any Hoek triaxial cell and 2000 kN Automatic Compression Testing Machine (PRS-B4231) for the triaxial tests. Other type of PARSROS compression testing machine (respect to the capacity) can be used instead of PRS-B4231.

Technical Specifications LateralPressure Equipment PRS-B4231
Max. Working Pressure 700 bar (70 MPa) 410 bar
Dimensions 1050x500x300 mm 800x500x970 mm
Weigth (approx.) 20 kg 795 kg

Product Code : Product Description

PRS-ZE0095 : Dynamic Cone Penetrometer (DCP)

STANDARDS :

The PRS-ZE0095 Dynamic Cone Penetrometer is used for the rapid, in situ measurement of structural properties of existing road pavement constructed with unbound materials.

it incorporates an 8 kg weight dropping through a height of 575 mm and 60° cone having a diameter of 20 mm. with the standard DCP measurements can be made down to a depth of approximately 850 mm or when extension shafts are used to a recommended maximum depth of 2 m.

Readings are usually taken after a set number of blows, changing the number according to the strength of the layer being penetrated. A typical test takes only a few minutes, therefore the instrument provides a very efficient method of obtaining information that would normally require the digging of test pits.

The penetration hammer assembly consists of 8 kg hammer, hammer shaft, anvil with plastic plate coupling for ruler and handle.

The Dynamic Cone Penetrometer is supplied complete with;
A hammer assembly,
Penetration rod,
2 piece 60° cone,
Metal plate coupling for ruler,
Segmented adaptor for extension rods,
Segmented upper extension rod,
Segmented lower extension rod,
2 piece 13-17mm AF spanners,
3mm AF hex wrench,
Tommy bar,
A bottle of adhesive,10cc,
Users Manual
Steel ruler,
Carrying Case, heavy-duty wooden

Aggregate Crushing Value (ACV) Sets

Product Code Product Description

PRS-A0630 : Aggregate Crushing Value (ACV) Set Ã? 150 mm BS

PRS-A0631 : Aggregate Crushing Value Cylinder Ã? 150 mm for PRS-A0630

PRS-A0632 : Aggregate Crushing Value Base Plate for PRS-A0630

PRS-A0633 : Aggregate Crushing Value Plunger for PRS-A0630

PRS-A0634 : Aggregate Crushing Value Cylindrical Measure for PRS-A0630

PRS- A0408 : Tamping Rod Ã? 16x600 mm

PRS-A0640 : Aggregate Crushing Value (ACV) Set Ã? 75 mm BS

PRS-A0641 : Aggregate Crushing Value Cylinder Ã? 75 mm for PRS-A0640

PRS-A0642 : Aggregate Crushing Value Base Plate for PRS-A0640

PRS-A0643 : Aggregate Crushing Value Plunger for PRS-A0640

PRS-A0644 : Aggregate Crushing Value Cylindrical Measure for PRS-A0640

PRS-A0645 : Tamping Rod Ã? 8x300 mm

The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Each set consists of steel cylinder, plunger, base plate, cylindrical measure and tamping rod. All parts of the apparatus are powder coated or galvanized steel, heat treated and ground before manufacturing to make it durable and reliable. For aggregates smaller than 10 mm, a 75 mm diameter cylinder and associated equipment is available.

PRS-A0630 and PRS-A0640 Test Sets are also used for the Ten Percent Fines Value (TFV) of aggregates according to BS 812:111.

The Aggregate Crushing Value (ACV) Set is supplied complete with;
Cylinder,
Base Plate,
Plunger,
Cylindrical Measure
Tamping Rod

Product Code PRS-A0630 PRS-A0640

Dimensions 250x250x600 mm120x120x350 mm

Weight (approx.) 29 kg 6 kg

Manual Softening Point Apparatus (Ring and Ball Test Sets )

Product Code Product Description

PRS-AS0130 Ring and Ball Test Set, 220-240 V 50-60 Hz

PRS-AS0130/110 Ring and Ball Test Set, 110 V 60 Hz

PRSTD-1410 Hot Plate with Magnetic Stirrer

PRS-AS0131 Brass Ring, with Steel Ball and Ball Centering Guides, 2 pcs.each

PRS-AS0132 Ring Holder and Assembly

PRSGG-1330 Borosilicate Glass Beaker 600 ml

PRSGT-1305 Glass Thermometer Max. 110°C

PRSGT-1315 Glass Thermometer Max. 250°C

PRSGT-2050 ASTM 15C Thermometer -2 +80°C (IP 6OC)

PRSGT-2055 ASTM 16C Thermometer +30 + 200°C (IP 61C)

STANDARDS : EN 1427; ASTM D36; AASHTO T53

PRS-AS0130 Ring and Ball Test Set, 220-240 V 50-60 Hz The PRS-AS0130 Ring and Ball Test Set is used for determining the softening point of bituminous materials by ring and ball method.

If required, Glass Thermometer PRSGT-1305, PRSGT-1315, ASTM 15C or 16C Thermometer should be ordered separately.

The Ring and Ball Test Set is supplied complete with;

â?¢ Hot Plate with Magnetic Stirrer
â?¢ Brass Rings, 2 pcs.
â?¢ Ball Centering Guides, 2 pcs.
â?¢ Thermometer, Temperature Sensor with Holder
â?¢ Steel Balls, 9.5 mm dia., 2 pcs.
â?¢ Ring Holder and Assembly
â?¢ Borasilicate Glass Vessel Beaker 600ml

Dimensions 280x400x200 mm (packed)

Weight (approx.) 4 kg

Power 650 W

Product Code Product Description

PRS-KA0550 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 220-240 V 50-60 Hz

PRS-KA0550/110 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 110 V 60 Hz

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRS-B0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407

The PRS-KA0550 Automatic Pressure System is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power pack is equipped with a proportional valve to provide a sensitive control of the loading rate and to maintain a constant confining pressure to within 0.1 bar. Pressure is controlled by using the PID closed loop controlled electronics. The user can define the set lateral pressure and display the lateral pressure through the control and readout unit.
Control Uni is designed to control the power pack and processing of data from pressure transducers which is fitted to the power pack.
All the operations of Control Unit are controlled from the front panel consisting of a 800x480 pixel 65535 color resistive touch screen display and function keys 4 analogue channels are provided for loadcells, pressure transducers or displacement transducers.

It has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Its specimen setting sub-menu lists different specimen types including but not limited to cube, cylinder, block, beam, beam double upper bearers, cube splitting tensile, cylinder splitting tensile, paving block splitting tensile and kerb flexure. The Control Unit digital graphic display is able to draw real-time "Load vs. Time" or "Stress vs. Time" graphics.

The Control unit offers many addition unique features. You can save more than 10000 test results in its internal memory. Storage capacity can be increased up to 32 GB using SD memory cards or USB disk-drives. Control unit has support for various off-the-shelf USB printers, supporting both inkjet and laser printers. Control unit is equipped with a built-in internal camera which can save real-time video during testing for security purposes. Thanks to its built-in internet protocol suite, every aspect of control unit device can be controlled remotely from anywhere around the world. Last but not the least, It has support for Android tablets permitting to control and monitor your testing equipment remotely.

Product Code : Product Description

PRS-ZE0665 : Spring Type Proctor Penetrometer

PRS-ZE0666 : Needle Set for Proctor Penetrometer

(28.55, 24.79, 20.22, 16.54, 12.83, 9.07, 6.40, 5.23 and 4.52 mm diameters)

The PRS-ZE0665 Spring Type Proctor Penetrometer is used for establishing the moisture-penetration resistance relation of finegrained soils. The apparatus consists of a spring loading device which is graduated from 10 to150 lbf in 2 lbf subdivisions.

Needle Set for Proctor Penetrometer consist of interchangeable needle points of 28.55, 24.79, 20.22, 16.54, 12.83, 9.07, 6.40, 5.23, 4.52 mm diameters and a carrying case.

Dimensions : 540x260x60 mm (packed)
Weight (approx.) : 5 kg

Product Code Product Description

PRS-ZE0965 Surface Soil Sampler (Core Cutter), 3â?� dia. ASTM

PRS-ZE0966 Spare Sampling Tube (Drive Cylinder), 3â?� (76.2 mm) x 70 mm high, ASTM, for PRS-ZE0965

PRS-ZE0967 Surface Soil Sampler (Core Cutter), 4â?� dia. ASTM

PRS-ZE0968 Spare Sampling Tube (Drive Cylinder), 4â?� (101.6 mm) x 127 mm high, ASTM, for PRS-ZE0967

PRS-ZE0970 Surface Soil Sampler (Core Cutter) Set, 100 mm dia., BS

PRS-ZE0975 Surface Soil Sampler (Core Cutter) Set, 150 mm dia., BS

STANDARDS : ASTM D2937; CNR No.22; BS 1377:9

Surface Soil Sampler (Core Cutter) is used to determine the insitu density of soil by taking a standard volume of soil sample from the ground which is then removed, trimmed and weighed.

The ASTM/CNR version, PRS-ZE0965 and PRS-ZE0967 Surface Soil Sampler (Core Cutter) consists of a drive head, 5 kg drive hammer and a thin wall sampling tube. 5 kg sliding weight drop hammer makes a free-fall on to the driving head which is placed on top of the sampling tube. Manufactured from steel and plated for corrosion resistance.

PRS-ZE0970 BS Type 100 mm Surface Soil Sampler (Core Cutter) Set consists of a driving dolly, 13,5 kg driving rammer and 100 mm dia. x 130 mm high core cutter. PRS-ZE0975 BS Type 150 mm Surface Soil Sampler (Core Cutter) Set BS consits of a driving dolly, 16 kg driving rammer and 150 mm diax 180 mm high core cutter.

PRSM-4000 : Hydraulic Universal Testing Machine,600 kN, 220-240V

PRSM-4000/110 : Hydraulic Universal Testing Machine, 600 kN, 110V

PRSM-4001 : Frame for 600 kN Hydraulic Universal Testing Machine

PRSM-4002 : Hydraulic Grips Jaw Faces Set for Round Specimens

PRSM-4003 : Hydraulic Grips Jaw Faces Set for Flat Specimens

PRSM-0500 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm),

PRSM-0510 : Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm)

PRSM-0520 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm)

PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine.

Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards.

Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen.

Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically.

PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity.

The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.

Diesel Generator Set

Sitting group made of barrels

It is protective with long-lasting synthetic machine paint that is resistant to UV and sun rays.

The fabrics on it are water-repellent, stain-proof, durable, permanently stitched leather. It is comfortable to sit on.

Sponge thickness is 8 cm fabricated cnc cut 27 density sponge.
In our products, the floor is scratch-proof.

Automatic Grinding Machine

Product Code Product Description
PRS-1040Automatic Grinding Machine, 220-240 V 50-60 Hz

PRS-1042Grinding Wheel PRS-1035 and PRS-1040

PRS-1043Cradle for Ã?:38-100 mm Cylindrical Specimens

PRS-1044Water Restraint Panel Set

PRS-1048Water Restraint Panel for dia 160mm Cylinder Specimen

Water Impermeability Tester ( 3 Unit )

Product Code Product Description

PRS-BWIT3 Water impermeability Tester ( 3 Unit )

STANDARDS : TS EN 12390-8,EN 12364,DIN 1048,ISO 7031

Apparatus at 3 or 6 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure The unit accepts up to 3 concrete cubic, cylindrical or prismatic specimens having max. dimensions of 200x200x200 mm

The specimen is put into the test chamber, clamped with suitable flanges and gaskets, and then a known water pressure is applied on the specimenâ??s surface for a time as requested by Standard, by using a suitable air compressor (accessory) having at least 5 or 20 bar pressure capacity

The water penetrated is measured by breaking the specimen, or by reading the water permeated through the graduated burette fixed on the front panel

Dimension 1290 x 450 x 1280 mm

Weight 120 kg (app.)

Woodcarving, an ancient Turkish art, was employed in various techniques on architectural elements such as columns, doors, window shutters, and on objects such as chest boxes and small tables. As of the 17th century, tortoise shell, mother-of-pearl, ivory and bone appliquTs became more popular. The backgammon set has been reproduced today according to their traditional specifications and designs and will be important elements of tomorrows special collections. Private label production possible.