This device operates with 1 or 2 measuring cells. After entry of test-specific sample data into the controller, the test is completely automatically carried out and evaluated. The device has an interface for a generally commercially available printer. Scope of equipment delivered: automatic air permeability tester, 1 bottle of fill oil, 500 ea. Round filters (diam. 41 mm), 100 ea. Dust filters (diam. 13 mm), 1 ea. Tamper Dimensions: 200x160x400 mm Weight: 12 kg Dimensions
Speed rate control: motor speed control unit Load measure compression:450 bar press.Trans. Load measure flexure: 250 bar pressuretransducer Oil flow control : 24 v selenoid valve Power : 220-240 v 1 ph 50 hz Dimension: 600 x 600 x 1400 mm Weight : 1350 kg. Concrete, material testing equipment, test press
Pull-off tester 20 kn En 1015/12 - 1348 - 1542 - 12504/3 • astm c 90 With servo-controlled drive unit and tensiontransducer, Fully integrated. 11
U-box, “stainless steel” made, with inside smooth walls, foreseen of a flow obstacle, formed by vertical reinforcement bars. Dimensions
The jolting group is connected to the table by bayonet joints for quick checking of the weights. The drop height 15, 0 mm is adjustable to keep it correct also after intensive uses. The apparatus is supplied with control panel including main switch, automatic digital drop counter, start/stop push buton Power: 220-240 v, 1 faz, 50 hz, 500 w Dimensions: 1000x380x420 mm Weight: 60 kg. Dimension
The FOAMCEM light weight cellular concrete is obtained mixing liquid cement grout, or sandcement grout, with the foam made from our foaming agent foamcem.By this system a structure of closed air bubbles is formed into the mix and this fact takes an high insulating power and lightness to the material.Foamcem technology allows, varying the foam-cement-sand ratio, to obtain light weight cellular concrete with a density from 300 to 1.600 kg/m3 according to requirements. Packaging: metal drums 230 kg net weight. Consumption: kg 1, 5-2 cubic meter of cellular concrete depending on the density produced.
Does not create cracks Can be applied to any surface
Replacement parts of caterpillar Construction machinery Used machine in : d8k/d9 caterpillar Unit weight : 6, 00 kg
Link assembly Used machinery in : 973 caterpillar Origin : turkey Brand : krg We manufacture the best quality replacement parts of power train, transmission and undercarriage parts of caterpillar, komatsu earthmoving machinery. Unit weight : app.31, 70kg /each
ZIM 18 Concrete Block (Hollow Block) Machine: Is special design machine for block production that works fully automatic.The movement of the machine is programmed the PLC microprocessor computer. By changing moulds all kinds of blocks, lentos and precast concrete elements can be produced in a serial way. 20cm block can be produced 18 units in one press. Machine is able to produce the insulated block upon demand. We use pneumatic bellows in machine mould connections, due to this system vibration on mould is expanded regular and uniform. Motrar part of the machine is moving on strong chromium columns. Height regulations also done automaticly but not with manpower.
Stationary Concrete Batching Plants With capacities 30, 60, 90,120,150 m³ / hour. Aggregate bunkers, Aggregate Weighing Belts, Aggregate Conveying Belts, Weighing Systems, Cement Silos, Mixers. Automation systems are designed and produced by ZIM Engineers. Aggregate Bunkers and Cement Silos in different volumes can be produced on demand. Stationary Concrete Batching Plants are working fully automatic.
Product Code Product Description PRS-CM0075 Manuel Mortar Mixer, 220-240 V 50-60 Hz PRS-CM0075/110 Manuel Mortar Mixer, 110 V 60 Hz PRS-CM0076 Spare Bowl for PRS-CM0075 and PRS-CM0085, 5 L PRS-CM0078 Spare Beater for PRS-CM0075 and PRS-CM0085 STANDARDS : EN 196-1, 196-3, 413-2, 459-2, 480-1, 1015-2, 12617-4; ASTM C187, C305, AASHTO T129, T131, T162 The PRS-CM0075 Manual Mortar Mixer has a 5 liter (approx.) capacity, it has been designed to mix mortars and cement pastes primarily to the requirements of standards. The mixing paddle revolves at a rate of 140 rpm. with a planetary motion of 62 rpm. in low speed. In high speed, the paddle revolves at the rate of 285 rpm. with a planetary motion of 125 rpm. The user can choose the speeds easily by using the switch fitted to the machine. There is a sand filling apparatus on the mixer to pour sand easily. The bowl and beater are easily fitted and removed from mixer. The Manual Mortar Mixer is supplied complete with; Bowl, 5 L (approx.) Beater Dimensions 300x555x610 mm Weight (approx.) 54 kg Power 200 W
Automatic Cement Compression & Flexure Testing Machines Product Code Product Description PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz PRS-CM0116 Upper Loading Platen with Ball Seating Assembly :165 mm and Lower Loading Platen,:165 mm PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator. Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are; â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure. Automatically saves the test parameters and test results. The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system
Production capacity is between 1200 and 1400 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 600-750 units. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 1500-1900 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 800-1000 pieces. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 2000 and 2300 units per hour and it is able to produce paving stone and briquettes in capacities ranging from 1200-1500. manual, semi-automatic and fully automatic preferred fixed machines.
The production capacity is 2600-3000 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 1500-2000 units. manual, semi-automatic and full automatic preferred fixed machines
Hourly production capacities ranging amount capable of producing briquettes 5500-6300 ratchet paving stone production capacities and can vary from 4000-4500 units, are semi-automatic and fully automatic machine preferably constant.
Our mobile designed walking briquette machines are designed in two different types, which press on the concrete or put pressure on a table and leave it on the concrete. NOVAL INC. It produces semi-automatic and fully automatic walking briquette machines capable of producing briquettes with capacities ranging from 1200 to 1400 units per hour. They are able to manufacture briquettes without the need for printing pallets. They only use concrete surfaces with a smooth surface
Box Culvert Machine; It produces Concrete Culverts between 800 - 800mm and3000 - 3000mm in minimum 1000mm and maximum 2000mm lengths. Production is made by connecting a single mold in all sizes. Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are used in the vibrator.
