Production capacity of 3500-3800 pieces per hour, and it is able to produce paving stone and briquette production capacity between 2000-2500 unites. semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 5000-5500 pieces per hour and it is able to produce briquettes in capacities ranging from 3500-4000 units. manual, semi-automatic and full automatic preferred fixed machines.
LINEAR CEILINGS In various colours (Standard Ral 9010) Colored by polyester coil coating system, Ceiling tile surface is coated with protective PVC film. Width: 85mm, 100mm, 150mm, 180mm, 200mm, 250mm In various thickness (Standard 0,50mm, 0.70mm) Perforated or non-perforated, They are light and place no load upon ceiling. Easy assembling, Easy cleaning and dismantle, prevents the heat loss. Acoustic performance (Acoustic insulation) Antimagnetic, Antibacterial, washable, cleanable Hides the appearance undesired. (Sanitary installation, ventilation chutes, electric installation etc.) It can be used again and again (recycle) Fire and moisture resistant, Shock proof, decorative.
CLIP-IN CEILING (Concealed Grid) Aluminium and Galvanized Steel 600x600mm, 300x300mm, 300x600mm In various colours (Standard Ral 9010 & Ral 9006) Colored by polyester coil coating system, Ceiling tile surface is coated with protective PVC film. In various thickness (Standard 0,60mm & 0,70mm) Perforated or non-perforated, They are light and place no load upon ceiling. Easy assembling, Easy cleaning and dismantle, prevents the heat loss. Acoustic performance (Acoustic insulation) Antimagnetic, Antibacterial, washable, cleanable Hides the appearance undesired. (Sanitary installation, ventilation chutes, electric installation etc.) It can be used again and again (recycle) Fire and moisture resistant, Shock proof, decorative.
LAY-IN SUSPENDED CEILING (Exposed Grid) Aluminium and Galvanized Steel 600x600mm, 300x300mm, 300x600mm In various colours (Standard Ral 9010) Colored by polyester coil coating system, Ceiling tile surface is coated with protective PVC film. In various thickness (Standard 0,60mm & 0,70mm) Perforated or non-perforated, They are light and place no load upon ceiling. Easy assembling, Easy cleaning and dismantle, prevents the heat loss. Acoustic performance (Acoustic insulation) Antimagnetic, Antibacterial, washable, cleanable Hides the appearance undesired. (Sanitary installation, ventilation chutes, electric installation etc.) It can be used again and again (recycle) Fire and moisture resistant, Shock proof, decorative.
Open cell ceilings Aluminium and galvanized steel 50x50mm, 75x75mm, 100x100mm, 150x150mm In various colours (standard: ral 9010 & ral 9006) Colored by polyester coil coating system, In various thickness (0, 30mm - 0, 70mm) They are light and place no load upon ceiling. Easy assembling, Antimagnetic, antibacterial, washable, cleanable Hides the appearance undesired. (sanitary installation, ventilation chutes, electric installation etc.) It can be used again and again (recycle) Decorative
BAFFLE CEILINGS Aluminium and Galvanized Steel Profile Size (mm): 25x75, 30x75, 40x75, 50x75, 25x100, 30x100, 40x100, 50x100 In various colours (Standard Ral 9010 & Ral 9006 & Ral 9005) Colored by polyester coil coating system, Ceiling tile surface is coated with protective PVC film. In various thickness (Standard 0,60mm & 0,70mm) Perforated or non-perforated, They are light and place no load upon ceiling. Easy assembling, Easy cleaning and dismantle, prevents the heat loss. Acoustic performance (Acoustic insulation) Antimagnetic, Antibacterial, washable, cleanable Hides the appearance undesired. (Sanitary installation, ventilation chutes, electric installation etc.) It can be used again and again (recycle) Fire and moisture resistant, Shock proof, decorative.
Lay-on suspended ceiling (exposed grid) Aluminium and galvanized steel 600x600mm, 300x300mm, 300x600mm In various colours (standard ral 9010) Colored by polyester coil coating system, Ceiling tile surface is coated with protective pvc film. In various thickness (standard 0, 60mm & 0, 70mm) Perforated or non-perforated, They are light and place no load upon ceiling. Easy assembling, Easy cleaning and dismantle, prevents the heat loss. Acoustic performance (acoustic insulation) Antimagnetic, antibacterial, washable, cleanable Hides the appearance undesired. (sanitary installation, ventilation chutes, electric installation etc.) It can be used again and again (recycle) Fire and moisture resistant, shock proof, decorative.
METAL LOCKER ALL PARTS 0,7mm TICK DIMENSIONS: 60*50*180CM PEDLOCK ALL RAL SERIES COLORS AVAILABLE
TECHNICAL SPECIFICATIONS DC-PWM driver without limit switch 220 V AC supply voltage 24 V DC brushed motor Double channel (A,B) 100 ppr encoder Clear opening dimension (700mm~900mm) The number of opening/closing cycles per year 600.000 Multiple electronic settings Size, length and velocity parameters Door power that can be adjusted separately on opening and closing directions Compatibility with variation of open/close command signals (24 V DC-220 V AC) Ability to operate with single (close) signal Adjustment of short circuit types as NO/NC Multiple mechanic adjustments Practical assembly Panel adjustment in 3 axes Adjustability of clear opening Places of use Low traffic building and houses
TECHNICAL SPECIFICATIONS CE locking system Modular sales and assembly option Compliant with EN 81-58 Central 2 Panel (uninsulated) E 120 EW 20 Telescopic 2 Panel (uninsulated) E 120 EW 20 Telescopic 2 Panel (insulated) E 120 EI 45 EW 60 Multiple mechanic adjustments Panel adjustment in 3 axes Lock position adjustment Spring stiffness adjustment Mechanism position adjustment
TECHNICAL SPECIFICATIONS CE locking system Modular sales and assembly option Compliant with EN 81-58 Central 2 Panel (uninsulated) E 120 EW 20 Telescopic 2 Panel (uninsulated) E 120 EW 20 Telescopic 2 Panel (insulated) E 120 EI 45 EW 60 Multiple mechanic adjustments Panel adjustment in 3 axes Lock position adjustment Spring stiffness adjustment Mechanism position adjustment
TECHNICAL SPECIFICATIONS DC-PWM driver without limit switch 220 V AC supply voltage 24 V DC brushed motor Double channel (A,B) 100 ppr encoder Clear opening dimension (700mm~900mm) The number of opening/closing cycles per year 600.000 Multiple electronic settings Size, length and velocity parameters Door power that can be adjusted separately on opening and closing directions Compatibility with variation of open/close command signals (24 V DC-220 V AC) Ability to operate with single (close) signal Adjustment of short circuit types as NO/NC Multiple mechanic adjustments Practical assembly Panel adjustment in 3 axes Adjustability of clear opening Places of use Low traffic building and houses
TECHNICAL SPECIFICATIONS DC-PWM driver without limit switch 220 V AC Supply voltage 24 V DC brushed motor Double channel (A,B) 100 ppr encoder Clear opening dimension (700mm ~ 1300mm) The number opening / closing cycles per year 800.000 Multiple electronic settings Size / Length and Velocity parameters Door power that can be adjusted separately on opening and closing directions Compatibility with variation of open / close command signals (24 VDC-220 VAC) Ability to operate with single (close) signal Adjustment of short circuit types as NO / NC Multiple mechanic settings Practical assembly Panel adjustment in 3 axes Adjustability of clear opening Place of use High Traffic Buildings, Hotels, Residencies, Public Places, Hospitals, Shopping Centers, Plazas
Technical Specifications CE locking system Modular sales and assembly option Compliant with EN 81-58 Central 2 Panel (uninsulated) E 120 EW 60 Central 2 Panel (insulated) E 60 EI 60 EW 60 Telescopic 2 Panel (uninsulated) E 120 EW 60 Telescopic 2 Panel (insulated) E 60 EI 30 EW60 Telescopic 3 Panel (uninsulated) E 120 EW 20 Central 4 Panel (uninsulated) E 120 EW 30 Multiple mechanic adjustment ability Panel adjustment in 3 axes Lock position adjustment Spring stiffness adjustment Mechanism position adjustment LANDING DOORS Strong mechanical construction Quality solution for a wide range of architectural options Full height size and framed glass panel options for prestigious designs 2014/33/ABye göre KLT003 CE sertifikası KLT002 FiÅ? kontak Compliant with 2014/33/EU KLT003 CE certified KLT002 Safety switch Dayanıklı, güçlü ve güvenilirâ?¦â?� Enduring, strong and reliableâ?¦â?�
Industrial grid manufactured by hammering and welding the round or crosswise sticks by high pressure, are considered among the economic and long-lasting products of Galvanerji. The robustness and the power of high endurance of this product used in many fields of the industry such as construction industry, treatment plants and bridge – power stations is ensured by the source of resistance carried out homogeneously from every points. As this grid has a high endurance power, it also distributes load in an optimum way.
GSM towers are the ones that are 12-40 meter in height, convenient for antenna installation together with the ground flange for the anchor base installation in a single part structure formed intermeshing of polygonal modules. Optional protection or portable stairway platforms could be included. The height of those towers is in between 10 to 100 meters. Our company carries out the manufacturing of the mesh type towers in compliance with the specifications of TEDAÞ, TEÝAÞ and the standards of TIA/EIA-222 F and 222 G. various GSM operators in Turkey prefer Galvanerji towers. Radio and TV towers of our company play a critical role in terms of domestic media.
We are manufacturing the poles used in lighting main roads, streets, parks, gardens in compliance with TS 914-ISO 9002 standards. Lighting poles are coated by at least 70 -80 micron galvanic in the zinc bath by hot-dipping method. We are carrying out our manufacturing as a result of static calculations by taking the height of the lighting poles, cantilever lengths, basic anchoring and the armatures installed above them into account.
Corrosion protection is provided through hot dip galvanizing.
High-quality steel bridges are made according to your own project or our project by professional team.
