Feed pump turbine drive packages are available from 100kw – 20mw. Complete steam turbine boiler feed pump packages are available, in addition to stand-alone steam turbine packages. 7 models, horizontal (axial and radial split), vertical , api 611- and 612-compliant, overhung and between-the-bearings wheel designs, metallic or carbon seals, electronic / hydraulic mechanical governors, customized steam path components, mechanical / electronic safety trip system, direct-drive or integral gear boxes with suitable lubrication systems.
Runner diameters: 0.6-3m Suitable water head: h=3-30m Capacity of the generator unit: 160-20000kw The speed range of the turbine: 60-750rpm * the propeller type is with a vertical axle and fixed runner, blade angle can not be changed during operation mode, the efficiency curve is steep and this type is generally suitable for power station that has water head with slight change or its operating units can be adjusted according to actual load change. * the kaplan type is with adjustable runner controlled by oil servomotor and moved according to the load/head change to ensure higher average efficiency, the efficiency of some kaplan turbine is higher than 94%.
Runner diameters: 0.8-3.3m Suitable water head: h=2-30m Suitable flow: q=1.62-53.6m3/s Capacity of the generator unit: 35-8700kw * it has large overflowing, good flow characteristic and high efficiency etc. Merits. * the runners are fixed or can adjust manual the efficient turbine of this kind can produce a large quantity of water flow which passes unimpeded. * all are horizontal type, the water enter into the turbine along the axial direction. * compared with vertical axle flowing type units, the factory building is little in excavating amount, and hydropower station water conservancy project investment can save 10%- 20%, equipment investment saves 5%- 10%. Every product, equipment, service and whole-system will be specially designed and customized according to each customer's or project's requirements. If you need us to design a proposal for your project, please send us your specific requirements now, our sales engineers will contact you the soonest.
Suitable water head: h=40-300m Suitable flow: q=0.35-1.166m3/s Capacity of the generator unit: 100-1250kw The speed range of the turbine: 600-1000rpm * its nozzle has a 22.5161227;angle with the runner rotation surface. * the runner is heavily pushed by water from pressure pipe that is switched to high speed jet flow through spray nozzle, imposing the runner in inclined direction. * the runner works by water flow entering one side of vane and coming out from its other side, pushing the runner to rotate, the runner then drive the generator through coupler to produce electricity. * it can reliably operate with simple structure, easy inspection and maintenance. * inclined jet type turbine has as simple structure as the pelton turbine, reliably operate with simple structure, easy inspection and maintenance. * it has the merit of high specific speed, wide application range, easy to coupling and direct connation to the generator. Addnew's inclined jet hydro turbines (turgo turbines) is one type of impulse turbine. It is well developed and widely used in mountain area.
Suitable water head: h=100-1000m Suitable flow: q=0.13-5.81m3/s Capacity of the generator unit: 200-20000kw The speed range of the turbine: 250-1000rpm * the runner works by being heavily pushed with jet flow that is switched through injection nozzle from high-pressure pipe. The feature is that is works by impulsing the runner to rotate with kinetic energy of water flow, and the jet center of nozzle and the runner are in the same plane. * it is divided into vertical type and horizontal type two kinds. Horizontal type each has 1-2 runner, each runner has 1-2 nozzle, vertical type each has only one runner, each runner has 2-4 nozzles.
Rated Power: 5kw Rated Wind Speed: 12m/s Cut-In Speed: 4m/s Cut-out Speed: 25m/s Subsistence wind speed: 55m/s Mill Diameter: 4m Mill Height: 4.6m Mill Weight: 975kg Tower Height & Weight: 5.5m (650kg) Generator type: PMG 3 phase Generator Rated Voltage: AC 250V Generator Rated Current: AC 11.5A Generator Protection Level: IP54 Controller Output Voltage (On-grid): DC 80-400V Controller Output Voltage (Off-grid): DC 110V Governed Speed Style: Aerodynamic Pitch Control Brake Style: Automatic Mechanical Brake system
Rated power: 10kw Rated wind speed: 12m/s Cut-in speed: 4m/s Cut-out speed: 25m/s Subsistence wind speed: 55m/s Mill diameter: 6m Mill height: 6.2m Mill weight: 2375kg Tower height & weight: 5.5m (1000kg) Generator type: pmg 3 phase Generator rated voltage: ac 250v Generator rated current: ac 23a Generator protection level: ip54 Controller output voltage (on-grid): dc 80-400v Controller output voltage (off-grid): dc 110v Governed speed style: aerodynamic pitch control Brake style: automatic brake system
Rated Power: 10kw Rated Wind Speed: 12m/s Cut-In Speed: 4m/s Cut-out Speed: 25m/s Subsistence wind speed: 55m/s Mill Diameter: 6m Mill Height: 6.2m Mill Weight: 2375kg Tower Height & Weight: 5.5m (1000kg) Generator type: PMG 3 phase Generator Rated Voltage: AC 250V Generator Rated Current: AC 23A Generator Protection Level: IP54 Controller Output Voltage (On-grid): DC 60-375V Controller Output Voltage (Off-grid): DC 110V Governed Speed Style: Aerodynamic Pitch Control Brake Style: Automatic hydraulic Brake system Mill Weight: 2375kg
Model Fzy1kw, Rotor diameter: 2.8m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 360r/min, Rated output power: 1kw, Max output power: 1500w, Output voltage: dc24v 48v/ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 2500kwh, Recommended accumulators: 12v150ah4pcs( 600ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 45kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box
Model: Fzy2kw, Rotor diameter: 3.2m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 320r/min, Rated output power: 2kw, Max output power: 3kw, Output voltage: dc48v 72v 96v /ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 5000kwh, Recommended accumulators: 12v200ah6pcs( 1200ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 80kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box
Model Fzy3kw, Rotor diameter 4m, Blades quantity 3 pcs, Blades material Frp (fiber reinforce plastic), Rated speed 260r/min, Rated output power 3kw, Max output power 4500w, Output voltage dc120-240v/ac110-240v, Start wind speed 3m/s, Rated wind speed 10m/s, Working wind speed 3-25m/s, Security wind speed 40m/s, Speed regulation Yaw& magnetic resistance, Charge control Aic (automatic intelligent control), Wind turbine type pmg (permanent magnet generator), Working temperature from -40 to +60, Annual average energy production 7500kwh, Recommended accumulators 12v200ah10 pcs( 2000ah ), Accumulators full charge time about 10 hours, Tower type pull wire tubular tower, Tower height 8m (optional), Weight 120kgs (without tower), Can supply power for air-condition. Refrigerator water pump. Electric cooker.Tv.Washer. Illumine. Fanner. Charge, Plywood box
Leo at qdfzy.Com Model:Fzy300w, Rotor diameter:2.2m, Blades quantity:3 pcs, Blades material:Frp (fiber reinforce plastic), Rated speed:400r/min, Rated output power: 300w, Max output power: 450w, Output voltage: dc24vor 12v/ac220v, Start wind speed:3m/s, Rated wind speed:8m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation:Yaw& magnetic resistance, Charge control:Aic (automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 750kwh, Recommended accumulators:12v100ah 1-2 pcs( 200ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower(optinal), Tower height:6m (optional), Weight:20kgs (without tower), Can supply power for: lighting, electric fan and charger, Plywood box
Leo at qdfzy.Com Model: Fzy600w, Rotor diameter: 2.5m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 400r/min, Rated output power: 600w, Max output power: 750w, Output voltage: dc24v/ac220v, Start wind speed: 3m/s, Rated wind speed: 8m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw& magnetic resistance, Charge control: Aic (automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 1500kwh, Recommended accumulators: 12v150ah2pcs( 300ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower(optinal), Tower height: 6m (optional), Weight: 40kgs (without tower), Can supply power for: color tv, lighting, electric fan and charger, Plywood box
MEGATRO is now offering different types of wind generators with competitive price, which including two types, vertical and horizontal type. It is used of wind energy in the wind farm, Energy Company and other fields. MEGATRO wind-driven generator, is one kind of electro-mechanical device that can transformed wind energy into the mechanical energy, then again transforms them into the electrical energy. It uses the wind power, gathers them to the battery charging and saves the electrical energy. Besides, it also gather the electrical energy transformation and alternating current supply which voltage and hertz is 220V/50HZ ,110V/60HZ,230V/50HZ. It has the advantages of no need the fuel and can't produce pollution and noises. And it has high efficiency and good low-speed, the speed regulating system adjusts automatically to wind speed, the whole system is easy to install and convenient to maintain. It is generally suitable for the areas when the wind resources are rich. And it is widely used in the areas when the electricity is not sufficient or the electrical network is not normal. The main applied fields are as follows: air conditioning refrigerator, the washer, the illumination, the television, the searchlight, the communication equipments, the power tool and others. Our wind generator' main parameters and sizes are as follows: 1 Machine Pattern: The horizontal (or vertical) axis approaches against the wind 2 Leaf Blade Pattern: Propeller 3 Leaf Blade Number: 3 pieces 4 Wind Wheel Diameter: 2.0 m, 2.5m, 2.6m, 2.8m, 3.2m, 4.0m, 5.0m, 7.0m, 8.0m, 12.0m. 5 Rated Speed: 160----400 revolutions/Minute, 6 Rated Power: 150W, 200W, 300W, 600W, 1000W, 1500W, 2000W, 3000W, 5000W, 10KW, 20KW, 30KW, 50KW 7 Working Voltages: 12V, 24V, 36V, 48V, 60V, 96V, 108V, 220V, 380V, 420V 8 Matches the accumulator cell: 480V, 9 Starting Wind Speed: 3.0 meters/ Second 10 Design Wind Speed: 8~ 9 meters/ Second 11 Operating Region: 3~20 rice/ Second 12 Hand of Rotation: Clockwise (face wind wheel) 13 The Wind cans the utilization factor: 0.4 14 High Speed Ratios: 6: 1 to 8: 1 15 Velocity Modulation Way: Leaning tail + electric brake 16 Sets Up an Altitude: 6-9meters Place of Origin: Qingdao, Shandong, China. Availability size: Based on the customer's requirements. Fabrication: Based on the customer's requirements and other technical data agreed by both parties. Package: packed with wooden case Terms of Payment: L/C, T/T Minimum Order Quantity: 1sets Port of Loading: Qingdao Port Delivery Time: one month or based on the customer's needs. Export standard package or as per client
MEGATRO provides the Wind Power Generating Industry the most reliable, economical MET tower systems in the business. These wind towers are made from solid steel and welded by certified welders, which is the tower units for wind power turbine, applied with wind power Generator during wind power generation. It is the large diameter & thick steel pipe structure below the generator of a wind turbine that supports the turbine, houses the meters and wires, and keeps the turbine high above the ground level to protect the surrounding area and people from the force of the blades. It is also the main stressed components which need to be enough strength and rigidity to endure huge wind pressure and shearing forces. The base also serves to elevate the turbine above surrounding obstacles that could otherwise block the wind. The tower units are formulated to a large tube with a variety of accessories which include platforms, ladders, cable fixings, positioning of switchboard and so on. Some of MEGATRO wind tower belong to sefl-support type, as same as taper monopole; MEGATRO's all welded design provides maximum tower stiffness, minimum twist/sway and bending. Towers come with single pole and climbing ladder and rest platform and other tower accessories. After fabrication towers are delivered to take sand-blasting, then painting them one by one. First prime painting, then intermediate coat and as last finish painting. All fabrication will be discussed by both parties and reach an agreement before mast production. Place of Origin: Qingdao, Shandong, China Model No: Based on the customer's requirements Terms of Payment: L/C, T/T Port of Loading: Qingdao Port Delivery Lead Time: one month or based on the customer's needs Design Requirements: based on the customers' specific requirements. Minimum Order Quantity: 1 set Performance Standard Chinese standard or international standard Material: Chinese material or as per clients material Export standard package or as per client
MEGATRO provide every type of camouflage tower to satisfy customer needs for different climatic and natural environments. There are available two different types that distinguish themselves by foliage shape and bark type, tower type including Austrian pine, maritime pine, palm, cedar or other tree tower. The trunk consists of a steel pole divided into several shafts, according to the overall height of the structure that can vary from 15 to 40 meters. The external surface of the trunk is lined by plastic material that is resistant to UVA rays and atmospheric agents, with an aspect that in time maintains the resemblance of natural bark. The foliage is comprised of branches made of plastic material accurately designed, taking into consideration quantity, shape and array suitable to completely conceal the antennas and all accessory parts in a natural manner. The materials used, in addition to guaranteeing absolute radio-electric transparency and resistance to UVA rays, over the time keep their proper mechanical and color characteristics. For more specification, both parties must discuss the style and technical requirements before production. Availability size: Based on the customer's requirements. Material: Chinese material or as per clients requirement Package: both parties discuss before delivery Terms of Payment: L/C, T/T Minimum Order Quantity: one set Port of Loading: Qingdao Port Lead Time: one month or based on the customer's needs Export standard package or as per client
In turkey we are producing high quality wind turbines .Please ask for our catalogs for detailed information. Tower type: composite coating over steel lattice Tower weight :18t Rotor blade type: horizontal axis, 3 blades
Hydraulic turbines.
Steam turbines.
Gas turbines.
