Auto diesel injection test equipment, such as the diesel pump test bench, common rail injector test bench, common rail pump test bench, common rail simulator.
EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS TFO 60i High Quality Inhibited Transformer Oil EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
ETRO 4+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydro-treatment - and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 4+ is the preferred choice for formulating cost effective, high-performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability Formulation Support: ETRO 4+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications
ETRO 6+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and is hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 6+ is an excellent choice for formulating cost effective, high performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low viscosity engine oils Superior low temperature performance Good oxidation stability Formulation Support: ETRO 6+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications
Premium greases are formulated with both Lithium, calcium soap mixed type
Automotive, engine care and fuel additives, industrial, railways, marine, aviation and greases.Shipping, manufacturers
Scrap Rubber, Natural Rubber, Palm Oil, Transportation.
Cars.
Availability In stock SKU 92016 Description 2017 Kubota zero turn with 25.5hp Kawasaki gas engine and 60" heavy deck, 257 hours.
If you are looking for a custom eBike that is truly one-of-a-kind, look no further than Customs eBike. With their commitment to quality, performance, and customer satisfaction, Customs eBike is the premier choice for anyone looking for a high-performance, custom-built electric bike.
CMC or Clutch Master Cylinder and it's Kits for Commercial Vehicles and Cars
The CPI -1519 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to give negligible solubility or dilution in hydrocarbon gases These compressor lubricants feature excellent protection against hydrogen sulphide (H2S) within the gas stream. Corrosion protection, low pour point and excellent lubricity ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1519 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and negligible dilution with hydrocarbons means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service intervals. Applications and Compressor Type Flooded rotary screw compressors Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Insignifi cant dilution in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased efficiency, reduced cost of operation
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
The CPI -4600 Series compressor lubricants are formulated using premium polyalphaolefi n (PAO) synthetic base fluid, coupled with a high performance additive package. These compressor lubricants feature excellent thermal and oxidation stability enabling them to operate over a wide range of temperatures without coking, deposit formation or corrosion. The lubricants have low volatility and exhibit excellent miscibility with hydrocarbon gas and good compatibility with mineral oil lubricants. The CPI -4600 Series are recommended for refrigeration services due to excellent low temperature properties. They are wax-free as they are synthetic. A low pour point prevents lubricants from congealing in refrigeration lines. High film strength provides lubricity even when diluted with refrigerant. Applications and Compressor Type Propylene Refrigeration Oil-flooded rotary screw compressors Liquid ring vacuum pumps Other applications requiring an oxidative and thermally resistant lubricant Features and Benefits Hydrocarbon miscibility Work well with hydrocarbon gas in industrial refrigeration systems Oxidatively stable Longer system life Low volatility Reduced maintenance, reduced top-up High viscosity index Wide temperature range of operation Excellent lubricity Increased efficiency, reduced cost of operation
The CPI -1516 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to ensure shear stability, corrosion protection, and excellent lubricity. These compressor lubricants feature excellent protection against yellow metal staining by careful selection of a combination of corrosion inhibitors. This, coupled with unparalleled oxidative and thermal stability ensures that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI -1516 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and high viscosity index means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. Applications and Compressor Type Flooded rotary screw compressors Propane refridgeration Features and Benefits Corrosion protection (yellow metals) Enhanced system reliability and reduced down-time Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased effi ciency, reduced cost of operation High viscosity index Satisfactory use over wide range of operational temperatures
The CPI-1508 Series compressor lubricants are formulated using a polyalkylene glycol (PAG) base fluid combined with a high performance additive package. These lubricants are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, oxidative and thermal stability enable the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1508 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1508 Series fluids are especially advantageous in compressors operating in harsh chemical environments, particularly sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Sour gas applications Heavy hydrocarbon gas stream applications Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
Automotive Gas Oil (AGO)
150mmand smaller tyre shred from PCR and TBR scrap tyres.
