Model swt80-95hpú¿2wdú¬ series tractor is in top position among the same industry in china and its matched power is r4105zt /r4110tdiesel engine. This tractor adopts fully hydraulic steering and hydraulic braking system. Its hydraulic suspension adopts catalogue ii, tri-point, synthetic draft and position control. Joggling sleeve is equipped for its gearing shifting. Independently operated two stage clutch, reasonable shift gears (8 forward shifts and 2 reverse shifts), two rev. Pto according with international standard, its whole suspended, independent and combined airproof cab and adjustable tread are equipped with it. It is not only suitable for various field work, transportation and fixed tasks, but also for muddy fieldwork and engineering tasks. Model swt tractor when smaller14.9-30 tyre and high-pressure working system used is more suitable for deep-plow and soil improvement in hard field of plain area.
Modelwf250 Type2wd wheeled type Dimensions of tractor(mm)length (to front ballast)2890 Width1470 Height (to the exhaust vent)1900 Treadfront wheel1300 fixed or 1100~1300 adjusted Rear wheel1300 fixed or 1300~1350 adjusted Axle base1710 Min.Ground clearance347.5 Structure weight (kg)1040 Ballast weight(kg)front ballast56 Rear ballast112 Rated traction force (kg)438 Enginemodel385 Typevertical, 3-cylinder, water cooled and 4-stroke Rated power(kw)18.3 Rated speed (r/min)2400 Fueldiesel Tyrefront wheel5.00-16 Rear wheel9.5-24 Clutchdual-stage clutch Steeringpower steering Transmission type8+2 or 8+8 with shuttle gearshift or 16+4 with creeper shift Suspension type3-point links Ptotype and revsemi-independent type 540/1000 Spline sizef35 rectangle spline with 6 teeth Packing:iron shelf
Sinotruck tractor Nude packing
Massey ferguson 50hp fower staring tractor. 1245-1854mm, 1690kg.
Massey ferguson tractor 60hp. 1920kg, 1890width, 3260mmlength.
New massey ferguson tractor . Wooden case.
Fork tyne specifications: Size (mm): 1200*1400*600 Rated Load (kg): 300-500 Load Height (mm): 2400.
Our company manufacture and export Disc plough, the plough match with the tractor three-point suspension, the plough discs rotate when it work, soil plough operations, especially for weeds, stems erect, soil resistance is large, the complex field work when the soil with rock. Has not wrapped around grass, non-blocking, non-stop up soil and crop stalks can be cut off and overcome the soil brick fragments, high efficiency, work quality, easy to adjust, durable and so on.
Tractor from 18hp to 80hp. Container, one container can load at least 4sets tractors.
(1) Model: TZ-3 front end loader Max. Lift Height (mm): 2100 Max. Dump Reach (mm): 600 Max. Dump Angle (deg.): 42 Rated Load (kg): 260 Bucket Capacity (cub. m): 0. 20 Dump Overturn Angle (deg.): 120 Max. Digging Depth (mm): 100 Bucket Width (mm): 1300 Load Lift Time (s): 6-9 Load Decline Time (s): 3 Overturn angle above ground (deg.): 26 Power Matched (hp): 20-25. Packing Method: Iron Crate Structural Weight (kg): 400 Shipping Dimensions (cm): 210*120*120.
Back hoe specifications: (1) Model: LW-6 backhoe Max. Digging Depth (mm): 1850 Max. Digging Radius (mm): 2800 Max. Digging Height (mm): 2500 Loading Height (mm): 1400 Swing Arc (deg.): 160 Bucket Rotation (deg.): 160 Connect Height (mm): 410 Connect Width (mm): 399 Valve Standard Pressure: 16Mpa. Load Capacity (m3): 0.036 Structural Weight (kg): 620 Shipping Dimensions (mm): 2200*760*1600 Bucket Width (mm): 300 Power Required (hp): 15-25 Max. Digging Length (mm): 1410. Packing Method: Iron Crate.
(1).Model: TX110 front bulldozing plate Dimension(l*w*h): 1000*1100*800mm Sructure weight: 260kg Working width: 1.1m Iron frame.
Techical specifications: Model: LZ804 Type: 4WD Wheeled Type Dimensions of Tractor(mm) Length (to front ballast): 4090 Width: 1900 Height (to the exhaust vent): 2690 Tread Front Wheel: 1380 Rear Wheel: 1520 Axle Base: 2316 Min.Ground Clearance: 430 Structure weight (kg) : 2940 "Ballast weight (kg)" Front ballast: 250 Rear ballast: 170 , 340 , 510 (optional) Rated traction force (kg): 1520 Engine Model: 4105 Type: Vertical,4-Cylinder,Water Cooled and 4-stroke Rated Power(kw): 58.8 Rated speed (r/min): 2200 Fuel: Diesel Tyre Front Wheel: 8.3-24 Rear Wheel: 14.9-30 Clutch:Dual-stage clutch Steering:power steering Transmission Type:8+2 or (8+2)í-2 with creeper shift Suspension Type: 3-point links PTO Type and Rev: Semi-independent Type 540/1000 Spline Size: F35 Rectangle Spline with 6 teeth . Steel frame packing.
Techical specifications: Model: LZ554 Type: 4WD Wheeled Type Dimensions of Tractor(mm): Length (to front ballast): 3847 Width: 1750 Height (to the exhaust vent): 2130 Tread Front Wheel: 1280 Rear Wheel: 1300 Fixed or 1200~1500 Adjusted Axle Base: 2073 Min.Ground Clearance: 325 Structure weight (kg) : 1790 "Ballast weight (kg)" Front ballast: 140 Rear ballast: 200 Rated traction force (kg): 1180 Engine Model: 4105 Type: Vertical,4-Cylinder,Water Cooled and 4-stroke Rated Power(kw): 40.4 Rated speed (r/min): 2400 Fuel: Diesel Tyre Front Wheel: 8.3-20 Rear Wheel: 12.4-28 Clutch:Dual-stage clutch Steering:power steering Transmission Type:8+2 or 8+8 with shuttle gearshift or (8+2)í-2 with creeper shift Suspension Type:3-point links PTO Type and Rev: Semi-independent Type 540/1000 Spline Size: F35 Rectangle Spline with 6 teeth. Structure weight (kg) : 1790.
Techical specifications: Model: LZ254 Type: 4WD Wheeled Type (mm)Dimensions of Tractor(mm) Length (to front ballast): 3030 Width: 1470 Height (to the exhaust vent): 1900 Tread Front Wheel: 1215 Fixed or 1150~1215 Adjusted Rear Wheel: 1300 Fixed or 1300~1350 Adjusted Axle Base:1710 Min.Ground Clearance: 347.5 Structure weight (kg) : 1130 "Ballast weight (kg)" Front ballast: 56 Rear ballast: 112 Rated traction force (kg): 551 Engine Model: 385 Type: Vertical,3-Cylinder,Water Cooled and 4-stroke Rated Power(kw): 18.3 Rated speed (r/min): 2400 Fuel: Diesel Tyre Front Wheel: 6.00-14 Rear Wheel: 9.5-24 Clutch:Dual-stage clutch Steering:power steering Transmission Type:8+2 or 8+8 with shuttle gearshift or (8+2)í-2 with creeper shift Suspension Type:3-point links PTO Type and Rev: Semi-independent Type 540/1000 Spline Size: F35 Rectangle Spline with 6 teeth. Length (to front ballast): 3030 Width: 1470 Height (to the exhaust vent): 1900.
Tractor 55hp, 4 drives, the advanced design on performance.Red/blue.With nice cabin. Weight:1870 kgs, dimensions:3420*1620*1630.
55hp,4 drives, blue.
Type SH824 Model 4-Wheel Driving Dimension(mm) Length (including front loading) 4396 Width 2038 Height(to vent) 2810 Wheelbase(mm) 2195 Front-Wheel Tread(mm) 1610 Rear-Wheel Tread(mm) 1620-2020 The smallest ground gap(mm) 379 Radius to turning circle apply the brake without single side(m) 5.6 Structure mass(kg) Type with a cab 3750 Type without a cab 3500 The smallest using mass(kg) Type with a cab 3990 Type without a cab 3740 Mass distribution(kg) Front wheeltype with a cab 1640 Type without a cab 1600 Rear wheeltype with a cab 2350 Type without a cab 2140 Loading(kg) Front loading Max:310 Rear loading Max:480 Rated traction(KN) 19 Engine(Dongfanghong) Type 4108T82 Marked power(kw) 60.3 Shift number 8F+4R Speed range(km/h) 0.46-36.9 Transmission clutch Single piece,dry style,compaction with butterfly spring. Independently operating. Double action clutch Gearbox Main and assistant shifts both are mesh with straight teeth Rear bridge central transmission Screw prick gear Different speeder Close style, 4planet prick gears Different speed lock Mesh cover style Rear final transmission Single planet gear style,out-position with both sides of the back-bring box Front driving bridge front center transmission Screw prick gear Front different speeder Close style, 2 planet prick gears Front final transmission Single planet gear style Independent driving box Shift with column gear belt in straight teeth Front wheel table specification 11.2-24 Rear wheel table specification 16.9-34 Turning model Independent oil way, front-wheel turn with full liquiud pressure Running arrester Still liquid-pressure, tray-style, operate low-position pedal by man-power Parking arrester Handle operation,oil-bath style with multi-friction surface and machine compaction Control way of plough depth Place controling, Floating control place adjusting The strongest lift force of the system(KN) More than 16 Hanging device(mm) Three points back hanging Driving output axis(r/min) Postposition independent style 760/1000 (optional/540/1000) Traction device type Shift tow level, the place of the tow level can be adjusted
Engine: 18HP Horizontal DI Transmission: 6 Forward / 2 Reverse Weight: 750kg
Howo 6x4 tractor Safety Strict standard for safety guarantees thorough protection to drivers and passengers. Comfort Comfortable and humanized design has already integrated with european heavy duty trucks. Humanization Humanized design is oriented according to internationally accepted level at present. Basic model family Cab: howo series cab Engine: steyr engine, Euro ii emission. Clutch: gf-ª)420 high-reliable clutch with power assistance. Transmission: fuller gearbox / zf gearbox Driving axle: global class howo single reduction driving axle. Steering gear: imported gearbox. Front axle: howo front axle Pto is included in tipper chassis. ú» full power pto is included in cement mixer chassis. Howo 7 series truck is carried out strictly road test, the fuel consumption can be lowered down 6 ¿c 6 liters than same model of steyr series truck.. Jinan century tianbang automobile import & export co., ltd., is the authorized company of sinotruk, and mainly deal with howo, steyr(king), golden prince, hoka series trucks and spare parts. We can supply 42, 64, 84 series tractor trucks, dump trucks, cargo trucks, water tank trucks, terminal tractor trucks, etc. Meanwhile, we can supply all original sinotruk spare parts for your after-sales service.
