Find Verified Touch Screen Lcd Monitors Suppliers, Manufacturers and Wholesalers

Content Monitor 15ppm
Type OCM-09GB



INTRODUCTION

The OCM-09GB type oil-in- water monitor has been designed specifically for use in continuous monitoring of oil-in-condensate or oil-in-boiler feed water without specific environment condition, it is applicable to high water temperature.



Features

Compact and robust construction


Low maintenance


Small dimensions


Easy installation


Continuous on-line work


Works adjustment


Easy zero adjustment via push buttons (5mg/l)




SPECIFICATION



Type:

OCM-09GB


Range:

0 â??199mg/l


Accuracy

0-50 mg/l Better than 2mg/l

50-199 mg/l Better than 5mg/l


Linearity

better than 2 %


Display

3 digits 7 segment LED's


Power Supply:

220VAC 24 Volt AC/DC ± 10%


Consumption:

5 VA


Alarm Points:

Adjustable between 1- 199 mg/l


Alarm Points works set:

10mg/l


Alarm Indication:

Red LED's


Output Signal:

0 - 20 mA or 4 - 20 mA, reversible Ri < 500 â?¦


Sample Water Pressure:

0,1 - 8bar


Sample Flow:

approx. 0,5 - 4 l/min depend. to pressure


Ambient Temperature:

- 20 to + 55° C


Sample Water Temperature:

+ 1 to + 80° C


Size (over all):

394mmWÃ?280mmHÃ?135mD


Degree of Protection:

IP 65


Weight:

10 kg


Pipe Connections:

R 1/4" Female

15 ppm Bilge Alarm Monitor Type OCM-07



INTRODUCTION



The OCM-07 type oil-in- water monitor has been designed specifically for use in continuous monitoring of oil-in-condensate or oil-in-boiler feed water without specific environment condition, it is applicable to high water temperature.

The unit is supplied with 2 works-adjusted alarms. The set point (15mg/l) could be adjusted at any moment through the front panel. If an alarm set point is exceed, the alarms are visible at the front panel and the appropriate relays are switched.



Features

Compact and robust construction


Low maintenance


Small dimensions


Easy installation


Continuous on-line work


Works adjustment


Easy zero adjustment via push buttons (5mg/l)

Hot p10 outdoor electronic advertising led commercial digital display screen

Led advertising board Features:
1) With good lightening accordance and no mosaic
2) Led advertising board can play different formats of image files, flash, WAV/MIDI, video signal from TV, video signal from video and other equipment
3) Different video frequency can be changed freely at the same time, and the image can be enlarged and reduced
4) High brightness, and can be adjustable, meets the need of changing requirement of customer in environment
5) Uses real pixels rather than virtual pixels, better viewing effect

led advertising board Applications:
Led advertising board wide applied in stadiums, advertising, banks, securities exchange, stations, shopping malls, postal offices, schools, monitoring, restaurants, entertainment, enterprises etc

advertising led board Specification p10:

The specifications of modules
Items Parameter
Product Model P10 Full Color Led Module
Module size 160mm*160mm
Pixel pitch 10mm
Pixel density 10000dots/m2
Pixel configuration 1R1G1B
Module resolution 16dots(W)*16dots
Module maximum power consumption 20W
Module Thickness 25CM
Module Weight 0.55kg
Driving method Constant Current Driving
Scanning method 1/4 scan
Interface HUB75B
Brightness â?¥8500cd/m2
The specifications of cabinets
Cabinet size 960mm*960mm
Module quantity 36pcs
Power supply 5V/40A 5V/60A
Cabinet resolution 96*96dots
Optimal viewing distance 10M~50M
Optimal viewing angle 160°(W) 120°(H)
RHWorking temperature (Work :-20°C~+50°C)
System operating humility 10%-95%
The specifications of power supplier
Operating Voltage AC220V±10%
Average power consumption 350W/H
Maximum power consumption â?¤700W/m2
Electric current â?¤20mA(single LED)
The specifications of control card
Control Panels Pentium4 or above
Operating system WIN98/2000/NT/XP
Control model Synchronization with PC
The specifications of the main technical parameters
Driving device Constant Current Driving
Refresh rate â?¥600HZ
Grey scale RGB Each 256, can display 16.7M colors)
MTBF â?¥9000hours
Power switch Automatic Switch

Guangzhou Seecem Electronics Co.,Ltd specialized in 15-42" inch Medical LCD Monitor with SDI,CCTV LCD Monitor,Industrial LCD Monitor,LCD Advertising display,Touchscreen ad display,Touch All-in-one PC,Network LCD Advertising display
LCD monitor for security monitoring,stock exchanges,Traffic control centers,airports,media centers,military systems,Public space,shopping areas,banks,schools,hospitals,bus,subway,hotel,building etc
www.tvledtv.com

Guangzhou Seecem Electronics Co.,Ltd supplying TV LED DLED LCD 15-42" inch
Medical LCD Monitor with SDI,CCTV LCD Monitor,Industrial LCD Monitor,LCD Advertising display,Touchscreen ad display,Touch All-in-one PC,Network LCD Advertising display.
LCD monitor for security monitoring,stock exchanges,Traffic control centers,airports,media centers,military systems,Public space,shopping areas,banks,schools,hospitals,bus,subway,hotel,building etc

FA70074 LCD display for Linx

We are a factory for producing spares and consumables for inkjet printers including Domino, Imaje, Linx, Citronix, Hitachi, Willett and Videojet.
Good quality with competitive price.
Please contact me for detail information.

No. Item Outline Size Active Area Solution Driver IC Pin Qty Touch Panel Backlight
1 3.0" 45.04*77.0 38.88*64.8 240RGB*400 ILI9327 40 PIN W TP OR W/O TP LED
2 3.5" 55.30*85.0 48.96*73.44 320RGB*480 ILI9488 44 PIN W TP OR W/O TP LED

Specification
LCD Tech FSTN/POSITIVE
Display pattem Dot matrix
AA size 1~12 inch
Polarizer Type Reflective/Transflective/Transmissive
View Direction 12 o'clock
View angle 42/30/42/42(CR=2)
Interface Type Parallel or Serial
Backlight Type with or without LED
Operation Temp width Temperature

Specification
LCD Tech ASTN/Negative
Display pattem Dot matrix
AA size 1~12 inch
Polarizer Type Transmissive
View Direction 12 o'clock
View angle 40/20/40/40(CR=2)
Interface Type Parallel or Serial
Backlight Type with or without LED
Operation Temp width Temperature

Specification
Lcd techDfstn/negative
Display pattemDot matrix
Aa size1~12 inch
Polarizer typeTransmissive
View direction12 o'clock
View angle 45/35/45/45(cr=2)
Interface typeParallel or serial
Backlight typeWith led
Operation tempWidth temperature

Specification
Lcd techVa/negative
Display pattemSegment type
Aa size1~5 inch
Polarizer typeTransmissive
View direction12 o'clock
View angle 80/20/80/80(cr=100)
Interface typeParallel or serial
Backlight typeWith led
Operation tempWidth temperature

Specification
Lcd techTn/positive
Display pattemSegment type
Aa size1~12 inch
Polarizer typeReflective/transflective/transmissive
View direction12 o'clock
View angle 30/15/30/30(cr=2)
Interface typeParallel or serial
Backlight typeWith or without led
Operation tempNormal temperature

Specification
Lcd techHtn/positive
Display pattemSegment type
Aa size1~12 inch
Polarizer typeReflective/transflective/transmissive
View direction12 o'clock
View angle 35/15/35/35(cr=2)
Interface typeParallel or serial
Backlight typeWith or without led
Operation tempWidth temperature

As a high risk component of hoisting, lifting and conveying equipments, wire rope is regarded as the “lifeline” in many industries. However, the safety of in-service wire ropes has always been the “blind spot ”or “source of danger” in equipment management, because of the lack of reliable testing instrumentation. How to detect the deterioration of in-service wire ropes and ensure their safety is an urgent demand for wire rope users.
Invention of tck•w® wire rope on-line real-time safety monitoring system has fundamentally changed the backward situation of wire rope inspection management?
The delectability of the tck•w® on-line system is much higher for localized flaws (lf) and its precision is much accurate for the loss of metallic cross-sectional area (lma) and rope diameter reduction. It has solved the three problems of wire rope application –“hidden dangers, waste and low efficiency” for oil drilling (repairing) customers and helped wire rope users achieve “safety, economy and efficiency.”it has been recognized as the most advanced wire rope ndt inspection system in the world.
Features
*making the steel wire rope under a fully controlled and safe condition in operation process.
*combining the production process and inspection process into one, which will reduce one process, increase effective operation time and enhance the productivity.
*reducing the idling energy consumption of equipment specifically for testing wire rope, and effect of energy saving is obvious.
*making the service life of wire rope more effective and proper, saving wire rope replacing time and reduce the cost of wire rope.

We can offer full range of LCD panels for Industrial displays, including general digital signage, interactive white boards, transportation information, video conferencing, and advertisement. Our products are designed as reliable indoor and outdoor displays, and combine features such as high brightness, super narrow bezel, LED backlight, multi-touch, mirror display, and low power consumption.

Size Model Resolution
21.5" T215HVN01.1 1920×1080
3.5" PD035VX7 640×480
5.0" G050VTN01.1 800×400
6.5" AM640480 640×480
6.5" G065VN01 V2 640×480
10.4" G104SN02 V3 800×600
10.4" AM800600K7 800×600
10.4" G104X1-L04 1024×768
12.1" G121X1-L04 1024×768
15.0" G150XTN04.0 1024×768
17.0" G170J1-LE1 1920×1200
19.0" G190ETN01.1 1280x1024
19.0" LB190E02-SL03 1280x1024

Dear friend,

Do you still feel trouble about setting the ip code of the lcd display one by one when especially the quantity of the display unit over 12?

Do you still feel messy about the cables between the splitter and display device, and cables between each display devices?

Do you ever expect the display device with all the function of the matrix switchers, which take much cost and occupy big space?

Now all these problems can be sloved with our new solution:
1. Automatically setting the ip code in 2s no matter how many display devices there are
2. Only need one network cable connecting each lcd display
3. What's more, unlike dp/dvi loop, there is no quantity limit of output.

1. Industrial grade panel with 24/7 design and long life span
2. High Definition, high resolution and high brightness for better visual enjoyment
3. Supporting different signal input to meet your need
4. Ultra narrow bezel with 3.5mm
5. Solution provided according to your requirement

Model No. FT-P5553SL
Panel Size 55"
Brightness 500cd/sq/m
Bezel 5.3mm
Maximum Power Consumption (W ) 220
Aspect Ratio 16:9
Max Resolution Support 1920*1080
Color 8Bit,16.7M
Contrast 3500
Visual Angle (H/V) 178°
Response Time 100,000(hrs)
Input and output
DVI 1
HDMI 1
VGA 1
YPbPr 1(BNCx3)
S-video 1(BNCx2)
Composite Video Input/(AV) 3(BNCx3)
Composite Video Output 2(BNCx2)
Control signal input and loop out RS232(RJ45-8)
Split Screen Support Picture in Picture(PIP/POP)
Power Supply AC100V~240V
Standby Power Consumption

3.5" transflective TFT LCD module 320x240, lcd readable under the sun
Specifications:

sunlight readable tft display--3.5 inch 320x240
1.Transflective tft lcd
2.Outline:85x53.64x2.93
3.A.A:71.52x53.64
4.ILI9341
sunlight readable tft display--3.5 inch 320x240

Item Specification
LCD type a-si, 3.5" tft lcd, sunlight readable tft display , positive
Display type 3.5" TFT, normal white
Driver element a-si TFT Active matrix
Outline Dimension(mm) 85.0x53.64x2.93
v.A(mm) 74.52x56.54
A.A.(mm) 71.52x53.64
Driver IC ILI9341
Resolution(dots)_ 320*RGB*240
Viewing Direction 12H
Operating temperature(°C) -20-70
Storage temperature(°C) -30-80
Number of Pixel(pixels) 240(H)x 3RGB x 2400(V)
Pixel arrangement RGB Vertical Stripe
Display mode Normally white
Surface treatment Antiglare, Hard-Coating(3H)
Weight(g) TBD
Backlight 6 LEDs, White
Weight(g) TBD
Module lifetime(Hours) 50,000-100,000



TFT LCD Module series:

1. Our standard tft lcd module size:

1.44", 1.77", 2", 2.4", 2.8", 3", 3.2", 3.5",

4.3", 5", 5.6", 5.7", 7", 8", 10.1", 12.1", 15".

2. New products: 3.5", 4.3", 5.0", 5.7" and 7" TFT Functional Module, transfer RGB to MCU interface.

3. 2.8", 3.5" transflective/ sun readable tft lcd.

4. 3.5", 5", 7" tft lcd with capacitive touch panel.

4.3" tft lcd screen 480*272 with touch panel

Main Parameters:

Item 4.3 inch TFT LCD screen
Model name TST043015CMHX-P
Display Mode Normally White,Transmissive
Resolution 480*RGB272
Driver IC HX8257A
Pixel arrangement R.G.B. Vertical Stripe
Outline Dimension 105.5x67.2x4.2(Typ.)
Active Area(mm) 95.04(H)x53.856(V)
Interface RGB
Viewing Direction 12 O'clock
Surface treatment: Anti-Glare
Touch Panel Optional
Luminance(cd/m2) 480
Backlight 10pcs. white LED
Operating Temperature -20~70°C
Storage Temperature -30~+80°C

TFT LCD Module series:

1. Our standard tft lcd module size:
1.44", 1.77", 2", 2.4", 2.8", 3", 3.2", 3.5",
4"(3.97"), 4.3", 5", 5.6", 5.7", 7", 8", 10.1".
2. New products: 3.5", 4.3", 5.0", and 7" TFT LCD with CTP and MCU interface .
3. 2.2", 3.5" transflective/ sun readable tft lcd.
4. Our Specials Technology : can make AR( Anti-reflective), AF(Anti-fingerprint),AG(Anti-Glare)and also use EWV(extremely wide view) polarizer.
5. Specails items: 4.3'' 5.0'' 7.0'' developed 1000nits brightness.


Delivery:

Shipping via DHL, UPS,TNT, FedEx Express, Air mail, and seamail.

Our service:
1. Custominzed TFT module.

2. Do OEM &ODM fro TFT LCD Module pannel.

3. Good quality and quick reply


Our Advantages for LCD pannel
1. FOG automatical device can ensure the capacity of 1000,000 per month.
2. MOQ can be 100pcs, lead time of standard products is 20 days.
3. Reliability test and full examination to ensure the high quality of the display.
4. OEM&ODM are provided for TFT/TN LCD/Plastic Moulding.
5. Strictly ISO quality management system.
6. Mature and Professional R&D and after service.
7. Various cooperation experience with big brands.