Product advantages: The main problems affecting the service life of hydrogen production equipment are the shedding of cathode catalyst, the degradation of anode performance, and the decline of the hydrophilic and gas-repellent performance of the diaphragm. AUYAN's hydrogen production equipment has a unique life and durability strategy. 1. Avoid Cathode Catalyst Falling Off "Pre-spraying technology" patent, the mechanical adhesion of Raney nickel on the surface of the nickel mesh is more reliable, and the service life is better guaranteed 2. Avoid anode performance degradation Anode edge sealing adopts a "plate electrode" design to avoid local rapid oxidation deterioration and life decay of anode 3. Avoid the degradation of the hydrophilic and air-repellent properties of the separator While the surface layer of the diaphragm itself is hydrophilically modified, an additional hydrophilic modification layer is introduced, so that the hydrophilic and air-repellent effect is strengthened inside and outside, and the overall hydrophilic and air-repellent performance of the diaphragm is lasting and stable.
EN 143 Automated Filtration Efficiency PFE Tester Mask Testing Machine G506 is used to test the inhalation resistance and exhalation resistance of respirators and masks under certain condition. Usage: Mask Particulate Filtration Efficiency Tester is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc. Standards: GB 19083, GB 2626, GB/T 32610, 42 CFR Part 84 JIS/T 8151 EN 149, EN 12941, EN 14594, NFPA 1972 Multifunctionï¼? 1. This machine can be used for different filter material 2. Customized clamp for different sample size is available 3. Both salt solution and oil solution test can run on this machine Product Usageï¼? The Particulate filtration Efficiency tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. It's suitable for safety testing of such products, basic filtration performance evaluation and development guidance for new products. It is applicable to the performance verification of new products , quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technic al supervisiondepartment, etc.
Products Description The pure titanium aerator head for ozone aeration is made of industrial pure titanium powder (purity â?¥ 99.6%) as the main raw material, which is sintered at high temperature and high vacuum. The aeration head is divided into three types: tube type, plate type and spherical type. The spherical type is welded by porous titanium spherical surface and titanium plate, which can be directly connected to the pipe thread. Various interface connection methods can be customized according to the specific needs of customers. The pure titanium aerator head for ozone aeration is widely used in Ozone sterilization for drinking water and reclaimed water reuse, aeration in sewage treatment aeration tanks, and fermentation oxygenation, etc. The aeration bubble diameter of this product is small, the gas-liquid interface diameter is small, the gas-liquid interface area is large, the bubbles diffuse evenly, no hole blockage occurs, and the corrosion resistance is strong. The aerator is an essential equipment for aeration and oxygenation of drainage. Underwater aerators mainly include microporous aerators and jet aerators, which can be divided into surface aerators and underwater aerators according to the method of use. It is suitable for urban sewage, new expansion of large factories and renovation of old aeration tanks, and the aeration tanks can be operated intermittently. The oxygen utilization rate of the aerator head has high power efficiency, large service area, low energy consumption, fine and uniform bubbles, good flow rate and state; no need for repeated flushing, and easy management. Products features 1. Uniform and small pore size; 2. High porosity and large aeration range; 3. High temperature resistance, acid and alkali resistance, oxidation resistance; 4. No particle shedding; 5. Outstanding pressure resistance; 6. Good sealing. Application field 1. Ozone sterilization and aeration of pure water and mineral water; 2. Ozone aeration of industrial wastewater; 3. Domestic sewage treatment aeration; 4. Ozone aeration of petrochemical wastewater. Product specification Spherical type: �?100MM, �?150MM, �?180MM Flat type: �?125MM, �?180MM, �?235MM Tube type: �?20MM, �?30MM, �?40MM, �?50MM, �?60MM Interface: 4 points, 6 points, other special interfaces can be customized
EN 143 Automated Filtration Efficiency PFE Tester Mask Testing Machine G506 is used to test the inhalation resistance and exhalation resistance of respirators and masks under certain condition. Usage: Mask Particulate Filtration Efficiency Tester is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc. Standards: GB 19083, GB 2626, GB/T 32610, 42 CFR Part 84 JIS/T 8151 EN 149, EN 12941, EN 14594, NFPA 1972 Multifunction 1. This machine can be used for different filter material 2. Customized clamp for different sample size is available 3. Both salt solution and oil solution test can run on this machine High Accuracy 1. Support Chinese and English, menu type operating mode and large LCD display, itâ??s easy to switch 2. Two test method available: efficient test and load test 3. Simple, fast and automate operation
The GF302D1 three phase portable energy meter test equipment consists of an integrated three phase current source(up to 500V/120A or 500V/20A) and built-in three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the GF302D1 are its wide measuring range, high accuracy and high tolerance to unwanted external influences. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 7" touch LCD-display. Voltage & current harmonics output from 2 to 63 times. This model portable meter test equipment can be programmable by PC, automatic generation of energy meter error test report.
The GF302D portable meter test equipment is used for grid corporation of measurement and energy test center, management department of power supply bureau, national energy measurement of testing authorities, and also used to test each kind of single/three phase kWh meter of industries and mining enterprises as well as electric meter manufacturers. Meanwhile, the meter test equipment also can be used as one high precision standard power source, voltage source and current source. Portable design, used in the laboratory or on site to auto check energy meter error.
CPL-N100 Square Billet/Round Billet Mold Surface Cladding Detection Overview This product is a new type of mold copper plate surface cladding detection equipment. The equipment adopts a high-precision and high-sensitivity laser ranging sensor, which scans the copper plate of the mould by scanning a laser line with a fixed width, and returns the measurement data in real time. After modeling and analyzing the data, the upper computer gives the wear data of the mold copper plate, as well as the data of surface cracks and surface flatness. The host computer software intuitively reflects the surface profile of the detected mold and cladding thickness deviation and other data to the user in the form of data sheet, data curves and mold 3D model diagrams, providing a true and reliable theory for on-site operators to maintain the mold. The mold surface cladding detection equipment is a high-precision instrument, which includes high-precision laser ranging sensors, two digital servomotors, encoders, horizontal sliding screws, vertical sliding screws, and calibration consoles, controllers and other components. The equipment has many advantages such as high accuracy, strong stability, convenient installation and strong observability. It is suitable for mold surface cladding detection, surface flatness analysis, surface flaw detection, taper measurement, etc. It is also suitable for round billets, square billets, slabs, special-shaped billets, etc., widely used and powerful. The parameters Detection instrument service life: 5 years; Detection instrument reliability: more than 98%; Detection range: 60~1000mm (customizable) Detection accuracy: 0.01mm Spot diameter: 1.0x1.5mm (spot scan), 1.0x20mm (line scan) Falling pace: 1~20mm/step Single measurement time: less than 2min Power supply: DC24V Operating temperature: -20~80 Equipment warm-up time: 3~5min Shock resistance: 50G (X, Y, Z axis) Vibration resistance: 10Hz~5Hz (amplitude 1.5mm, each 2 hours in X, Y, Z axis)
GREENMAX Foam Densifier ZEUS C200 Polyethylene Foam |Polystyrene Foam Densifier Foam Densifier ZEUS C200 can prevent the compacted EPS, PE Foam, and other materials from scattering. A foam densifier could also prevent the compacted material from loosening again. GREENMAX foam densifier offers convenience for foam recyclers. A foam densifier with an automatic cut-off system saves labor costs a lot. Applicable materials: include EPS(Styrofoam), EPE(PE FOAM), EPP, XPS and PSP, Food Trays and Cups
9" 5.7mm Chrome Plating Roller Frame with 4 Wires Decorative Wire Frame Quick Details Grade: DIY, Industrial Frame type: Cage frame Color: Customized Wire steel: 4 Wire Packing: In bulk Size: 7'',9''or Customized Frame material: Chrome plating Customized support: OEM,ODM Usage: Industrial Brushes, Civil Brushes Packaging Details: carton size:.39*34*25CM,160pcs/carton Port: Nansha
"brush cutter blade size :255*25.4*40T thickness:1.25MM MATERIAL:IRON Function :cut grass"
"brush cutter blade size :255*3T*3.0*25.4 thickness:1.6MM MATERIAL:IRON Function :cut grass"
"Suitable for most leading trimmers and brushcutters. Longer lasting trimmer line than normal line. Premium trimmer line for cutting."
*Gasoline/2-cycle oil mixing ratio: 25;1 * Oil tank capacity: 260ML * Fuel tank capacity: 550ML * Displacement: 58cc * Engine type: 2-stroke,air-cooling *POWER MOTOR: 2.6 KW *PRODUCT COLOR : Red+Black * CE Standard
"Suitable for most leading trimmers and brushcutters. Longer lasting trimmer line than normal line. Premium trimmer line for cutting."
"Color: Silver Function: Aluminum Trimmer Head"
"* Gasoline/2-cycle oil mixing ratio: 25;1 * Oil tank capacity: 260ML * Fuel tank capacity: 550ML * Displacement: 52cc * Engine type: 2-stroke,air-cooling * POWER: 2000W * CE Stander "
"* Gasoline/2-cycle oil mixing ratio: 25;1 * Oil tank capacity: 260ML * Fuel tank capacity: 550ML * Displacement: 52cc *Engine type: 2-stroke,air-cooling * POWER: 2 KW * PRODUCT COLOR: Light Blue+Grey(No,9c) * CE Stander"
"Color: Red+Silver Function: Chain Trimmer Head"
Cable Harness Probe Pogo Pin CH136-LJ7(6.1) for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CH136-LJ7(6.1) harness probe we will introduce here is 1.36 mm in diameter and 33.1 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 4 mm at most when this probe works, although the plunger can move as far as 6.1 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 4 mm, its loaded force is about 225 gf, namely 8 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. For details, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 6.1 mm Rated Stroke: 4 mm Spring Force: 225�±65 gf (8 oz) at load 4 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: Beryllium Copper, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment.
For all kinds of devices working with electricity; You can use the Wavecontrol WP50 Low frequency probe to measure the electrical field and magnetic field effect created by energy transmission lines (low medium high voltage transmission cables), transformers, electrical appliances etc.
