Breaking hammer factory
Manufacturer: Mimaki Printer compatibility: Mimaki CF2-0912RC / CF2-0912RT / CF2-0912T / CF2-0912TD / CF2-0912TF / CF2-1215RC / CF2-1215RT / CF2-1215T / CF2-1215TD / CF2-1215TF / CF2-1218RT / CF2-1218T / CF2-1218TD / CF2-1218TF / CF3-1610R1 / CF3-1610TF2 / CF3-1631R1 / CF3-1631TF2 / CG-50 / CG-60EX / CG-60SR / CG-60SRIII / CG-60st / CG-75FX / CG-75FXII / CG-90SD / CG-100EX / CG-100Lx / CG-100SD / CG-100SRII / CG-100SRIII / CG-130EX / CG-130FX / CG-130FXII / CG-130Lx / CG-130SRIII / CG-160FX / CG-160FXII / CJV30-60 / CJV30-60BS / CJV30-100 / CJV30-100BS / CJV30-130 / CJV30-130BS / CJV30-160 / CJV30-160BS / TPC-1000 / CF2-0907RC / CF2-0907RT / CF2-0907T / CF2-0907TD / CF2-0907TF / CFS-1313 / CFR-1220 / CF-0907-2 / CF-0912-2 / CF-1215-2 / CF-1218-2 / CG-101 / CG-45 / CG-61 / CG-100SD / CG-90AP / CJV150-107 / CJV150-107BS / CJV150-130 / CJV150-130BS / CJV150-160 / CJV150-160BS / CJV150-75 / CJV150-75BS / CJV300-130 / CJV300-130BS / CJV300-160 / CJV300-160BS DP part number : PBLMICG002 This original set of 3 blades is suitable for Mimaki cutting plotters and printers. These blades have an offset value of 0.3mm. These blades are suitable for cutting adhesive-backed sheet like vinyl. These blades are hardly broken while higher cutting pressure is required. This is the original Mimaki part (number SPB-0001).
Corrugated cardboard cutting blade knife We specialized in Mechanical Cut-off Blade,serrated blade,mill saw cutting blade and So on) Spiral blade,NC cut-off blade,spiral serrated blade,Helical sheet knife, slitting cutters, Slotting knife ,Core-Cutting-Industrial-Knives-Burst-Slitter-Knives-, Slitting circular knife,Cutting knife for Honeycomb cardboard, all kinds of cutting knife,Carbide circular knife,steel round knife, tungsten steel knife . We are always service for you in 24 hours! huataolover001ï¼?atï¼?outlook.com whatsapp /wechat +8617736903537
ITEM SPECIFICATION MODEL ACM-20 GRINDER CAPACITY 200-350KG/H MAIN MOTOR POWER 15KW (HAVE THE INVERTER) FEED MOTOR POWER 1.1KW (HAVE THE INVERTER) FEED TYPE SCREW FEED CLASSIFIER MOTOR POWER 2.2KW (HAVE THE INVERTER) FAN POWER 22KW (HAVE THE INVERTER) SCREEN ROTARY SCREEN HEAT EXCHANGER INCLUDED DISCHARGE CONTROL SYSTEM DOUBLEVALVE CONTROL MOTOR BRAND SIEMENS BRAND ELECTRICAL COMPONENTS Schneider FREQUENCY INVERTER Schneider ELECTRICAL SPECIFICATION 380V 50 HZ, 3P.
This is a semi-automatic Rockwell hardness tester with digital display. The Rockwell hardness tester can be used to test the Rockwell hardness of ferrous metal, non-ferrous metal, nonmetal materials. The main shaft system adopts friction-free structure, achieve automatic testing force loading/keep/unloading, which avoid the error caused by the manual operation. The digital display can avoid the indication error, the testing results can be printed out.
Spectrum Analyzer SA9130 Series The new high-performance Spectrum Analyzer SA9130 Series were developed with all-digital IF technology to meet demanding customer requirements, its professional bench type, compact size, elegant outlook to show our well design. We can also provide rf spectrum analyzer. Suin is a China supplier and manufacturer of 3 ghz Spectrum Analyzer,Rf Spectrum Analyzer, digital spectrum analyzer. Preamplifier and EMI filter are standardly configured. If you want to know more about cheap spectrum analyzer, welcome to contact us. Features *Frequency range from 9kHz to 3.0 GHz *-160dBm Display Average Noise Level (Min.) *< -100 dBc/Hz @10 kHz Offset Phase Noise (Typ.) *Total Amplitude Accuracy < 0.8 dB *Preamplifier and EMI filter are standardly configured. Specification SA9130 Frequency Range 9kHz to 3.0GHz Resolution 1Hz Frequency Span Frequency Span Range 0Hz, 100Hz to 3GHz Uncertainty ±span/(sweep points-1) SSB Phase Noise -80dBc/Hz (10 kHz offset, fc=1.0GHz) Bandwidth Resolution Bandwidth (-3dB) 10Hz ~ 1MHz, step 1-3-10, RBW Uncertainty 10%, nominal (RBW>1kHz) 20%, nominal(RBWâ?¥10Hz, sweep timeâ?¥5s) Video Bandwidth (-3dB) 1Hz to 1MHz, step 1-3-10 Amplitude Range DANL to +30dBm Maximum Input Level DC Voltage: 50V CW RF Power: +30dBm (1.0W) Max.Damage Level: +40dBm (10W) Displayed Average Noise Level (DANL) DANL (Preamplifier Off) typ. -125 dBm DANL (Preamplifier On) typ. -135 dBm Reference Level Range -100 dBm to +30 dBm, step 1 dB Sweep Sweep Time Range 10 ms to 3000 s (100Hzâ?¤Spanâ?¤3GHz) 20 μs to 3000 s (Span=0 Hz) Sweep Time Uncertainty 5%, nominal (100Hzâ?¤Spanâ?¤7.5GHz) 0.5%, nominal (Span=0 Hz) Sweep Mode Continuous, Single Trigger Trigger Source Free, Video, External External Trigger Level 5 V TTL level Advanced Measurement Channel Power, Adjacent Channel Power, N-dB bandwidth, Occupied Bandwidth EMI 200Hz, 9kHz, 120kHz Input/Output RF Input Impedance 50 Ω Standard frequency Frequency: 10MHz -3dBm to +3dBm (output) Interface Type USB Host & Device, LAN, VGA, RS-232 (only SA9100 series available) General Characteristic Power Supply Input Voltage: AC100V to 240V Frequency: 50/60Hz (1±10%) Power Consumption: 35W Dimension & Weight 363*154*327 mm, Approx. 6.0 kg
Material: stainless steel Type: Roth, MBT Size:16#-35# Packing: 80 pcs/box Product introduction: there are 20 sets(80 pcs) molar band with tube in each molar band kit box. The molar band is made of stainless steel, our factory also can make the molar band according to the requirement of customer. Product characteristic: 1.Ergonomic design with smooth surface to make patients comfortable. 2.The banded shape corresponds to the shape of the teeth. 3.The thickness of molar band is from 0.11mm to 0.13mm. 4.The size of molar band is from 16# to 35#, there are 4 pcs for each size, so there are total 80 pcs in each molar band kit box. 5.Dimensions specified in accordance with the requirements of international conventions. 6.The rough inner surface can improve the bond strength according to the requirement. Specification: Edgewise, UL*1, UR*1,LL*1,LR*1 MBT, UL*1, UR*1,LL*1,LR*1 Roth, UL*1, UR*1,LL*1,LR*1 Size: 16#-35#
Product introduction: dental orthodontic Bicuspid band is made of high quality stainless steel, itâ??s usually used in hospital for dentists and orthodontists. We can make dental orthodontic Bicuspid band according to the requirement of customer, such as: weld different kind of buccal tube or weld Sheath or Cleat.The characteristic of dental orthodontic Bicuspid band:1. Designed according to the tooth shape2. The best imported stainless steel materials provide uniform thickness and comfortable hardness.3. Clear laser marking, easy to identify the tooth position of molar band 4. Locating groove of molar band, close to tooth surface, improve stabilityThe size of dental orthodontic Bicuspid band:1#, 2#, 3#, 4#, 5#, 6#, 7#, 8#, 9#, 10#, 11#, 12#, 13#, 14#, 15#Delivery and shipping:all products can be delivered by Express,by air and by sea according to your order quantity, generally speaking, if the weight is less than 45 kg, Express will be the first choose, weight is 45kg-200 kg, will choose by air, weight is more than 200 kg, the goods will be
Tools-2LB American Type Sledge Hammer with Wooden Handle XL0121 MATERIALS Forged carbon steel as materials, no cast Iron TYPE American Type SIZE 2LB-20LB. HARDNESS 45-55HRC. SURFACE Powder coated surface. HANDLE Grade A natural color wooden handle, others workable. LOGO Printed, Color Label, Laser engrave workable. PRICE EXW,FOB,CFR,CIF workable. Prices could be negotiable according the quantity OTHERS Fix with metal wedge and Infused with epoxy gum, more safe more durable. **Our Services 1,different sizes, different types, different materials workable. 2,customers design and logo are welcome. 3,OEM acceptable. 4,small order acceptable. 5,with the best prices and delivery on time. 6,samples could be offered. More details about the hammers, please feel free to contact us.
*Materials:#45 Forged carbon steel. *Hardness:45-55HRC. *Drawing Force:>10000N. *Moisture:550N*250MM. *Standard:DIN,ANSI,BS standard. *OEM Workable. *Samples Available. More details, feel free to contact us.
*Materials:#45 Forged carbon steel. *Hardness:45-55HRC. *Drawing Force:>3000N. *Moisture:286N*100MM. *Standard:DIN,ANSI,BS standard. *OEM Workable. *Samples Available. More details, feel free to contact us.
Gas Dew Point Detection Instrument/Trace Water Content Tester Transformer Oil Tester Application: Dew point uses imported alumina or polymer film capacitive dew point sensor. It measures the trace moisture content in various trace gases. It is suitable for some online analysis occasion where the moisture content control requirement is quiet strict such as petrochemical, natural gas, industrial gas, semiconductor industry, drying industry, food industry, power industry, machinery manufacturing, air separation industry, and pharmaceutical industry. dew point tester Feature Portable design:light,portable,convenient to use. Rapid measurement:when start work,it takes a short time on measurement,and get the humidity value. Low gas consume:it just consume 2L(101.2kPa)in a test. Self-locking joint:the self-locking joint is imported from Germany,safe,reliable,leakproof. Data memory:high-capacity design,save up to 50 test data. Legible display:dew point,Micro moisture(ppm),ambient temperature,ambient humidity,time,date,battery,etc,can be read from the LCD. RS232 port:can be connected with serial printer,carry on data printing. Built-in power supply:built-in 4Ah rechargeable lithium battery,it can work continuously at least 10 hours. dew point tester Specification dew point Ranges -60 ~+20 Accuracy ±1(-60~+20) Test time(+20)
Hatchet with hickory handle 1, materials: forged carbon steel. 2, hardness: 45~55hrc. 3, handle: hatchet handle, fiberglass, plastic coated handle workable. 4, size: 400g, 500g, 600g, 700g, 800g, 1000g. 5, surface: polishing/black painted surface. 6, fixed with metal wedge and infused with epoxy gum make axes more safe and more durable. 7, packing: inner boxes and cartons. Remark: 1, customer's logo and design are welcome. 2, logo: printed or laser engraved. 3, samples could be offered free of charge. 4, small order workable. 5, with the best prices.
*Materials:#45 Forged carbon steel. *Hardness:45-55HRC. *Drawing Force:>3000N. *Moisture:286N*100MM. *Standard:DIN,ANSI,BS standard. *OEM Workable. *Samples Available. More details, feel free to contact us.
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 °C Choice of quick union or API flanged connections Choice of bleed port connections -
china coal 0001 Introduction of Hydraulic Spiral Screw Pile Driver 1. Hydraulic Spiral Screw Pile Driver using a new hydraulic technology, low consumption, large rotary torque,move the hole and shift the position is convenient. 2. The drilling rig structure is compact, it has a telescopic compensation function when promoting the slide carriage, the slide carriage supported on the ground when drilling, the drilling stability is very good. 3.The drilling rig is mainly used for piling anchoring, well, photovoltaic solar rotating pile and water conservancy, power plants, open-air mining, road construction and other stonework blast hole drilling and so on. Parameters of Hydraulic Spiral Screw Pile Driver Hydraulic Spiral Screw Pile Driver Pile driver part Engine power Kw 34 No. of cylinders PCS 4 Engine brand Changcai engine Working pressure 16-20 MPA Wheel distance M 2 Machine size MM 4100x2000x2200 Machine weight T 3.5 Hydraulic hammer Part Drill rod diameters MM 70 Drill rod weight KGS 19 Hydraulic hammer weight KGS 230 Working flow L/MIN 40-70 Working pressure Bar 110-140 Impacting frequency bpm 500-900 Pile height m 2-6.5
Z-20 Rail Mucking Machine Keywords: Rail Mucking Machine, Mucking Machine, Rail Mucking Machine Mucker Machine, Rocker Shovel, Rocker Shovel Loader Introduction of Z20 Rail Mucking Machine Z20 Rail Mucking Machine is a single bucket, front loading after unloading, and the rock mechanical walking on the tracks. Its purpose is to blasting rock or ore caving down into the back of the car. Z20 Rail Mucking Machine is not explosion-proof products; it is strictly prohibited in the inflammable and explosive gas such as gas environment. Advantage of Z20 Rail Mucking Machine 1. The electric rock loader is compact in structure which staffed narrow roadway .it is stable in operation, with no need of maintenance at the front 2000 hours 2. The Z20 electric rock loader can load wide range of materials .it is of high efficiency. 3. The electric rock has great humidity resistance. it can be used in dry or damp places 4. The electric rock loader adopt alloy wear resistance materials which  can be in utilization for a long time Parameter of Z20 Rail Mucking Machine ModelZ20Z30 load capacity40cbm/h60cbm/h bucket capacity0.2cbm0.3cbm loading Width1900mm2200-2500mm Discharge height (H)1250mm1300mm Dumping reach (S)350mm350mm Max operating height (H2)1940mm2250mm Travel speed0.99m/s0.99m/s motor modelJI2-8JI2-8 motor power2x10.5kw2x13kw track gauge 600mm (customized)600mm (customized) overall dimensionL (bucket is down)2120mm2590mm W1070mm1200mm H (bucket is down)1305mm1443mm    machine weight 3400kg4300kg
Z Series Electric Rock Loader Machine Keywords: Mining Mucker Machines, Mucker Machine, Rocker Shovel Machine , Rocker Shovel Loader, Electric Rock Loader Introduction of Z Series Electric Rock Loader Machine z series electric rock loaders are suitable for all kinds of mine horizontal roadway, the slope is less than or equal to 8 degrees, the machine for the bucket type, before loading and unloading, self-running, aerodynamic power source has two kinds of pneumatic and electric. Parameter of Z Series Electric Rock Loader Machine TypeZ-17AWZ-20Z-20AWZ-30AWZQ-26 Loading Capacity (m3/h)20-3030-4030-4050-6040-50 Capacity(m3)0.170.20.20.30.26 Loading Width(M)1.72.02.02.22.7 Rail Gauge(mm)600mm (When the rail gauge is 750mm,762mm, please mark in the order) PowerElectric motorElectric motorElectric motorElectric motorwind motor Travel Power(kw)10.510.510.51.510.5 Raising Hopper Power(kw)10.510.5131515 Discharge Height(mm)12501330136013701250 Dimension(mm)Length (bucket down) L21202480240026202375 Width (pedal down)10111210133013001380 Height (bucket working) H219202180218022602240 Height (bucket down) H112001518146015451455 Weight(kg)37603750370046002700
Pneumatic Rock Loader Rocker Shovel Keywords: Pneumatic Rock Shovel, Rocker Shovel, Mucker equipment, Rocker Shovel Loader, Air Rock Loader Description of Pneumatic Rock Loader Rocker Shovel Pneumatic Rock Loader Rocker Shovel performance characteristics: downhole direct unloading bucket type pneumatic rock loader. Its purpose is to put the rock down into the tub. To achieve the mechanization of loading work, thereby reducing the labor intensity of workers, improve productivity. This direct unloading rocker ZQ-26 aerodynamic rock loader is mainly used for the horizontal exploration of pneumatic equipment, roadway, or tunnel roadway can also be used for cavern excavation or mine loading work. Parameter of Pneumatic Rock Loader Rocker Shovel ModelZQ-26 Bucket volume0.26M3 Technique productivity52-60M3/h Loading width2500-2700mm Unload height1250mm Unload distance480mm Max. Air consumption11.5-19M3/min Working pressure5-6bar Gauge600mm Wheel diameter1000mm Length2375 Width1370 Height1375 Motor9+15kw Working speedabout 0.79m/s Promoting speed0.46-0.71m/s Weight2700kg
ZQ-26 Pneumatic Mucker Rocker Shovel Keywords: Pneumatic Mucker Rocker Shovel, Pneumatic Rock Shovel, Rocker Shovel, Mucker Machine, Rocker Shovel Loader, Electric Rock Loader Description of ZQ-26 Pneumatic Mucker Rocker Shovel ZQ-26 Pneumatic Mucker Rocker Shovel Is a compressed air powered rock shovel used for moving rocks, ore when driving headings or the explosive blows up the big rock or ore. It is a high output rock shovel with minimum maintenance costs; loading materials: gold, non-ferrous metal, black metal, nonmetal, and rock, ore, etc. It can be used in a explosion proof fields. The max diameter of the medium is 500mm. When the diameter is 250mm, the loading efficiency is best. It runs on the railway track, so the wheel gauge is 600mm in normal, when the gauge is 762mm, 900mm, or others, please tell in advance. Parameter of ZQ-26 Pneumatic Mucker Rocker Shovel ModelZQ-26 Bucket volume0.26M3 Technique productivity52-60M3/h Loading width2500-2700mm Unload height1250mm Unload distance480mm Max. Air consumption11.5-19M3/min Working pressure5-6bar Gauge600mm Wheel diameter1000mm Length2375 Width1370 Height1375 Motor9+15kw Working speedabout 0.79m/s Promoting speed0.46-0.71m/s Weight2700kg
