Toggle Clips Stainless Steel Draw Latch For Toolbox
Summary The Arrester is suitable for testing the internal defects of 10KV and below 10KV MOA (metal Oxide Arrester).Before the annual season of thunderstormsit 's necessary to test metal Oxide using 1mA DC voltage and 0.75U1mA leakage current at Power plants/substations.The equipment was developped according to the requirement of site it 's integrated with DC HV supplymeasurement and control system. it has the characters of small size and light weight. Feature 1.Supply power: AC220V or Charging battery. 2.LCD display test datas. 3.Convenient to carry.
1.Test voltage: 5000V DC 2.Range: 0-1999M 3.Resolution: 1M 4.Basic error: ±5% 5.Power supply: one cell 9V layer-built battery 6.Power source current: about 20mA 7.Environment temperature: 0-40 8.Environment humidity:85% 9.Dimension: 120-70 50mm
Product Characteristics 1. small size, light weight. 2. the measurement process is safe, fast, accurate measurement results. Product Parameters 1.Ambient temperature: -10 C~+50 C 2.Relative humidity: 20~90%(at 40 C) 3.atmospheric pressure:86~106kPa 4.Discharge test voltage: > 2kV 5.Charge time: < 1 minute 6.Power supply: 220V±10% Frequency: 50±1Hz Power < 30vA 7.Dimension: 300 200 180mm 8.Weight: 4KG
Application: TKBLQ-I zinc oxide arrester tester is a special instrument used to test the electrical performance of arresters. The instrument is suitable for live or power failure detection of arresters of various voltage levels, so as to timely detect the internal insulation damp and valve aging and other dangerous defects. TKBLQ-I zinc oxide arrester test instrument is easy to operate and easy to use. The whole measuring process is controlled by microcomputer. It can measure the total current, resistive current and its harmonics, power frequency reference voltage and its harmonics, active power and phase difference. The real waveform of voltage and current can be displayed on the large screen. Features: 1. 5.7 "320 Ã?? 240 LCD, high-speed thermal printer; graphic display, intuitive interface, easy to operate and use. 2. It is applicable to live arrester, power failure or laboratory. 3. The current and voltage sensors are completely isolated, safe and reliable. A, B, C three-phase arrester can be stored as a group of test data. 4. The instrument can test continuously, display voltage current curve, and print data and curve quickly. 5. The internal configuration memory can store 200 groups of test data when power down. 6. With RS232 communication interface, the test data can be exported through the upper computer. 7. High speed sampling frequency, advanced digital signal processing technology, strong anti-interference performance, high accuracy of measurement results. 8. It adopts dustproof, waterproof and anticorrosive engineering plastic sealing box, which is small in volume, light in weight and easy to carry.
1. The vacuum filtering device has the advantages of mature technology convenient use and high efficiency. It contains a number of taps can realize a number of filtering process. The use of water circulation device to replace the oil circulation pump make it more convenient with low failure rate 2. The air blast drying device adopts German technology the air duct is advanced the fan noise is small the performance is stable; 3. Microcomputer High precision intelligent control. Once set the temperature it self judge the heating power and display heating state. 4. Adjustable air inlet for temperature control and gas emissions. 5. digital electronic balance has correction function self-checking function and multiple modes
Application: TKBLQ-I zinc oxide arrester tester is a special instrument used to test the electrical performance of arresters. The instrument is suitable for live or power failure detection of arresters of various voltage levels, so as to timely detect the internal insulation damp and valve aging and other dangerous defects. TKBLQ-I zinc oxide arrester test instrument is easy to operate and easy to use. The whole measuring process is controlled by microcomputer. It can measure the total current, resistive current and its harmonics, power frequency reference voltage and its harmonics, active power and phase difference. The real waveform of voltage and current can be displayed on the large screen. Features: 1. 5.7 "320 Ã?? 240 LCD, high-speed thermal printer; graphic display, intuitive interface, easy to operate and use. 2. It is applicable to live arrester, power failure or laboratory. 3. The current and voltage sensors are completely isolated, safe and reliable. A, B, C three-phase arrester can be stored as a group of test data. 4. The instrument can test continuously, display voltage current curve, and print data and curve quickly. 5. The internal configuration memory can store 200 groups of test data when power down. 6. With RS232 communication interface, the test data can be exported through the upper computer. 7. High speed sampling frequency, advanced digital signal processing technology, strong anti-interference performance, high accuracy of measurement results. 8. It adopts dustproof, waterproof and anticorrosive engineering plastic sealing box, which is small in volume, light in weight and easy to carry.
Application: TK-15 insulator distribution voltage tester is used to test string of voltage distribution of AC circuit 35-500kV insulator. Insulator distribution voltage test meter also can do all kinds of 35kV and AC voltage measurement in laboratory. It is an ideal testing meter for the safety of line operation and the auxiliary tools for live operation. Features: This insulator voltage distribution tester use the static structure converted the measured voltage into electric field to measure so the impedance is high. Small impact on tested system. The measured signal is amplified by the internal process and finally directly visualized voltage value by LCD. Operate quickly simple and clear.
1. Wide range of measuring voltage can test up to 1000G (Max 2000G) insulation resistance 2. Three and a half bit LCD digital display of insulation resistance value 3. automatically shift resistance measuring range 4. environment temperature can be measured 5. self-clocking function short buzz every 15 seconds 6. automatically calculate and save R15S R60S R600S DAR and Polarization Index 7. Output short-circuit current larger than 5mA (meet fast charging request to capacitive load) 8. strong anti-interference ability stable and reliable reading 9. perfect protection safe for operation 10. powered by rechargeable Li-battery auto power off when battery energy is not enough
TKBLQ-II zinc oxide arrester tester is a special instrument used to test the electrical performance of zinc oxide arrester. The instrument is suitable for live or power failure detection of zinc oxide arrester of various voltage levels so as to timely detect the internal insulation damp and valve aging and other dangerous defects. TKBLQ-II zinc oxide arrester tester is easy to operate and easy to use. The whole measuring process is controlled by single chip microcomputer. It can measure the total current resistive current and its harmonics power frequency reference voltage and its harmonics active power and phase difference. The instrument uses digital waveform analysis technology harmonic analysis and digital filtering software anti-interference methods to make the measurement results accurate and stable. 1. This machine adopts large screen LCD display all English menu operation easy to use. 2. High precision sampling and processing circuit and advanced Fourier harmonic analysis technology ensure more reliable data. 3. The instrument adopts high-speed magnetic isolation digital sensor to directly collect the input voltage and current signals which ensures the reliability and safety of the data. 4. Support wireless synchronous voltage sampling mode (type II). 5. The instrument can use electric field induction instead of PT secondary wiring (type I). 6. It has the functions of resistive current fundamental peak output and side phase correction. 7. The instrument is equipped with rechargeable battery calendar clock and micro printer which can store 120 sets of measurement data.
Product Introduction Underground cable fault locator is my company in order to cater to the advent of the era of power the power industry in the integration of many high-quality goods package the cable fault testing industry with the rapid development of the IT era as an opportunity the single chip microcomputer and laptop type of cable fault tester on the basis of embedded computer platforms to create suitable for cable fault testing industry characteristics of network cable fault testing service platform and systematic integration of the USB communication technology touch screen technology 3 g communications technology greatly improve the function of the use of the instrument and the use value and convenient site environment operation.Considering the increasing number of buried cables;The system satisfy the People's Republic of China power industry standard "DL/T849.1 ~ DL/T849.3-2004" electric power equipment dedicated testing equipment general technical conditions the system test by the host system multiple pulse generator the path of cable fault locator and instrument of four parts used in power cable fault test path the embedding depth of cable for airport and railway signal control cable and street lamp accurate test of cable fault. Thanks to the hard work of many engineers in the company the product has reached the international level especially since the whole set of devices has surpassed the world level in portability.The core technology of the multi-pulse method has changed the traditional testing method which has fundamentally solved the problem of high-resistance fault waveform reading that was difficult to solve previously. After multi-pulse generator any complex high-resistance waveform can be converted into a very familiar and easy to identify low-voltage pulse short-circuit fault waveform.It solves the problem that the user cannot recognize the complicated high resistance fault waveform for a long time and improves the level of the key rough measurement.
Product Overview Adapts advanced technology TKGX Underground Cable Detector is the most effective device to detect underground utilities of gas electric power telecom water supply drainage cable television and etc. Features Portable designation suitable for wild field testing. Full digital control easy to control. English graphic display. Transmitter designed with over load and overheating protection. To detect the location and depth of underground cable accurately also is available for branch pipe or network construction underground cable. Two detect methods: AC current gradient method and ground electric field method. To locate and detect depth of underground cable synchronously.
The double edge razor (whether it comes in one, two, or three pieces) allows both sides of the blade to be used in shaving. A one-piece razor has a butterfly (or twist-to-open) head. A knob at the bottom of the handle releases the doors on the head which open to allow you to switch out the blade.
"AirCat Composite Air Impact Wrench - 1/2in. Drive, 8 CFM, 1,295 Ft.-Lbs. Torque" The AirCat 1150 1/2in. Composite Twin Hammer Super Clutch Impact Wrench is a powerful impact with killer torque. Pound for pound, it is one of the strongest twin hammer wrenches on the market! What's Included (1) 1/2in. impact wrench Features + Benefits 1,295 ft.-lbs. max. loosening torque 200â??950 ft.-lbs. working torque 9,000 RPM free speed 1,400 BPM Durable twin hammer mechanism with super clutch Best suited for all-around automotive maintenance Patented AirCat Quiet Technology (85dB) Easy Flip lever controls forward/reverse Ergonomic grip handle reduces operator fatigue Key Specs Item# 28799 Brand AirCat Manufacturer's Warranty 24 months parts / 24 months labor Ship Weight 4.5 lbs Drive (in.) 1/2 Speed - No Load (RPM) 9,000 Average Air Consumption (CFM) 4.3 CFM at Load 8 Operating PSI 90-120 Working Torque (ft.-lb.) 200-950 Forward Torque (ft.-lbs.) 200-950 Max. Torque (ft.-lbs.) 1,295 Max. Reverse Torque (ft.-lbs.) 1,295 Impacts Per Minute (IPM) 1,400 Hammer Mechanism Twin Variable Speed Yes Reversible Yes Standard Bolt Capacity (in.) 3/4 Inlet Size (in.) 1/4 Min. Hose Size (in.) 1/4 Noise Level (dB) 85 Tool Weight (lbs.) 4.5 Tool Length (in.) 7.5 Case Included No More Information Please Visit our website OFFICIAL STORE AGRA-TOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
"K & M Cab Interior Kit - Lower Right-Hand Panel, For Case International Harvester Tractors" This K & M Cab Interior Kit is made with high-quality materials and will make the inside of your cab look like new. Precision-cut for an OEM-like fit. Thermoformed gray plastic panel with OEM quality and color. What's Included (1) Foam kit (1) Spray adhesive Features + Benefits Made with high-quality materials Makes cab interior look like new Precision-cut for an OEM-like fit Thermoformed gray plastic panel with OEM quality and color Install with original trim and fasteners Key Specs tem# 47808 Brand K & M Manufacturer's Warranty 12 months parts / 12 months labor Ship Weight 8.0 lbs Make International Harvester tractors Product Style Panel kit Color Gray Pieces (qty.) 1 More Information Please Visit our website OFFICIAL STORE AGRA-TOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
"Generac 240 Volt Conversion Kit - For EcoGen Generators" With this Generac 240 Volt Conversion Kit, you can convert your EcoGen generator to a 240 Volt system and maintain a full 6 kW output. What's Included (1) 240 Volt conversion kit Features + Benefits Converts 120 Volt system to 240 Volts with full 6 kW output For Generac EcoGen generators Key Specs Item# 50871 Brand Generac Manufacturer's Warranty 3 month parts/no labor Ship Weight 1.0 lbs Application Conversion kit Amps 25 Volts Converts 120V power to 240V power More Information Please Visit our website OFFICIAL STORE AGRA-TOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
"DEWALT Heavy-Duty Cordless Impact Wrench Kit - 18V, 3/8in" Compact size and weight allows access into tighter areas and reduces user fatigue. Cranks out 1500 in.-lbs. max. torque for a variety of fastening applications. Heavy-duty impacting mechanism directs torque to fastener without kickback. U.S.A. What's Included (1) Cordless 18V impact wrench, Model# DC823KA (2) 18V batteries (1) 1-hr. charger (1) Heavy-duty kit box Features + Benefits Textured antislip grip provides maximum comfort Magnesium gear case All-metal transmission Key Specs Item# 133823 Brand DEWALT Manufacturer's Warranty 12 months parts / 12 months labor Ship Weight 12.0 lbs Drive (in.) 3/8 Volts 18 Drive Type Hog ring Batteries (qty.) 2 Max. Forward Torque (ft.-lbs.) 125 Impacts Per Minute (IPM) 0â??2,700 Max. Speed (RPM) 0â??2,400 Charger Included Yes Tool Weight (lbs.) 4.6 Storage Type Plastic case More Information Please Visit our website OFFICIAL STORE AGRA-TOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
"Klutch Mechanic's Tool Set - 566-Pc., 1/4in., 3/8in. & 1/2in. Drive" The massive Klutch 566-Pc. Mechanic's Tool Set is our largest Klutch set! Includes a complete size run of polished chrome vanadium sockets with hi-vis markings for easy reading, full polish wrenches, 72-tooth ratcheting wrenches, chrome moly impact sockets and more. Surface Drive sockets and combination wrench box ends virtually eliminate the rounding of fasteners. Backed by a lifetime guarantee. What's Included (1) 566-pc. mechanic's tool set Features + Benefits Surface Drive Technology sockets and combination wrench box ends virtually eliminate the rounding of fasteners Rugged chrome vanadium steel construction Sockets have polished chrome finish Hi-Vis markings for easy reading 72-tooth ratcheting wrenches let you work in tight spaces (4) Teardrop ratchets 1/4in.- 3/8in.- and 1/2in.-drive quick-release; 3/8in.-drive flex head (72) Full polish combination wrenches Standard: SAE: 1/4in.1 1/8in.; metric: 628mm; Midget: SAE: 5/32in.7/16in.; metric: 41mm; Stubby: 3/8in. 13/16in.; metric: 1019mm (32) 72-tooth ratcheting combination wrenches Standard: SAE: 1/4in. 13/16in.; metric: 817mm; Stubby: SAE: 5/16in.5/8in.; metric: 10-15mm (64) 1/4in.-drive sockets SAE: 5/32in. 9/16in.; metric: 4-14mm; regular and deep; 6-pt. and 12-pt. (103) 3/8in.-drive sockets SAE: 1/4in. 7/8in.; metric: 6-22mm; regular and deep; 6-pt., 8-pt. and 12-pt. (101) 1/2in.-drive sockets SAE: 3/8in. 1 1/4in.; metric: 9-29mm; regular and deep; 6-pt., 8-pt. and 12-pt. 35 bit sockets, 4 adapters, 3 U-joints, 11 extensions, 3 breaker bars, 2 magnetic driver handles, 14 nut drivers, 22 acetate screwdrivers, 2 pliers, 40 hex keys, 9 flare nut wrenches, 5 open end wrenches, 18 double box wrenches, 16 impact sockets, ratcheting half moon wrench, impact extension, 3 adjustable wrenches, magnetic tray More Information Please Visit our website OFFICIAL STORE AGRA-TOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
"GearWrench Tap and Die Drive Tools - 40-Pc. SAE Set" Patented Twist Lock Guide System reduces backwalk of die guide and keeps dies centered while cutting threads. Reversible lever with 5 ratcheting arc eliminates hand-over-hand turning. Ideal for working in tightly confined areas. What's Included Features + Benefits Includes ratcheting T handle, S, M tap adapters, die holder, sliding T for adapters, thread gauge Tap holders tilt for easy access Comfort shape grips For taps from 0-1/2in. (3-12mm); shanks from .110 to .280 Includes SAE taps #4-1/2in. and SAE dies #4-1/2in Key Specs Item# 253885 Brand GearWrench Manufacturer's Warranty Lifetime Limited Warranty Ship Weight 1.0 lbs Pieces (qty.) 40 Dies (qty.) 17 Taps (qty.) 17 More Information Please Visit our website OFFICIAL STORE AGRA-TOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
This instrument is an instrument which is specially used for transformer loss parameters and line frequency parameters testing. The instrument has the advantages of ingenious design excellent performance and powerful functions. The interior adopts advanced multi A/D synchronous sampling and digital signal processing technology and successfully solves the problem of multi-channel signal synchronous measurement and calculation. The instrument adopts large screen liquid crystal display Chinese menu prompt simple operation equipped with high-speed thermal printer and has storage function convenient for data storage and printing. The instrument is small in volume light in weight easy to carry and is very convenient to use in the field. It greatly reduces the labor intensity of the experimenters and improves the working efficiency. 1. Large LCD display simple menu operation. 2. With thermal printer storage function. 3. Small volume and light weight suitable for field work.
