innoCon6800O controller matching with innoSens 420 polarographic dissolved oxygen sensor, can continuously monitor the dissolved oxygen in water, with NTC automatic temperature compensation, panel installation, suitable for using under a variety of weather and complex industrial environments.
Application:
Wastewater Treatment
Surface Water
Aquaculture
innoCon 6800C controller is specially designed for water treatment and industrial process control. Used with innoSens 310/330 sensor, it can measure the conductivity,resistivity,TDS and temperature of the sample water. It features automatic temperature compensation and has various mounting methods. 4-20mA/RS485 and multiple control function outputs are a standard feature.
innoCon 6800CL Controller is specially designed for water treatment and industrial process control. Used with innoSens 710 sensor and PA-711 flow cell, it can measure the concentration of residual chlorine, chlorine dioxide and ozone in the water. Its adoption of membrane free constant voltage sensor eliminates the need for membrane and reagent replacement. Furthermore, it is highly sensitive and stable, only requiring simple maintenance.
The streaming current is used to continuously measure the electric charge on the tiny suspended particles and colloids in the liquid. The electric charge is measured by electronic signal processing.
The measurement result is converted into A.C signal or flowing current (SC). The value of flowing current (SC) is proportional to the charge density. The charged state depends on the water after flocculation.
UM0090 Ultrasonic Rangefinder Introduction
The UM0090 module is based on an ultrasonic sensor that combines transmitter and receiver in a single unit. By measuring the time of flight of ultrasonic wave, it can detect any object within 3 meters and output distance signals via UART interface.
This product features high sensitivity, fast response, and excellent anti-interference ability and stability. It is widely applied in object avoidance systems on robots, drones, and other smart devices.
UM0090 Ultrasonic Rangefinder Features
* Compact design for easy installation
* Measuring range up to 3M
* Excellent anti-interference ability
* Can detect objects of various colors, shapes an
You will find the right blades here for cutting film, paper, food and innumerable other cutting applications. They are universally applicable and fit in many manually operated cutting tools and in many machines.
*Absolutely top - quality raw materials
*Precision Machining Technology
*Optimum sharp cutting edges
*Save you more than 80%
*Cut Longer ,Change Less
*Packing style diversification and safety
*Accept customize packaging.
Packaging Details: Packaging in carton boxes and inner plastic bags or as your request
Delivery Detail: 15 days after confirmed the order
Specifications
cutter knife
1)Original raw material
2)Factory Price &Long use life
3)High hardness and wear resistance
Die Grinder Bits Carbide Tooling Tungsten carbide burrs
1. The Description of Tungsten Carbide Burr:
Carbide rotary burr is used with high-speed electric grinders orpneumatic tools,
which are widely used in industrial sectors such asmachinery,automobiles, ships,
chemicals, and crafts. Carbide rotary burr can be used to processmachine cast iron,
cast steel, carbon steel, alloy steel, stainless steel,hardened steel, copper and aluminum.
2. The Feature of tungsten rotary carbide burr:
Great efficiency, high degree of finish, long service life and high accuracy.
Easy to use, safe, reliable, economical and labor-saving.
Work with high-speed electric grinders or pneumatic tools..
Can process all kinds of metal(such as iron, steel,copper,aluminum) and non-metal (such as marble, jade, bone).
Widely used in machinery,automobile,ships,chemical,craft and more.
3.The recommended application of various types of tungsten carbide burr:
Arch ball/pointed nose engraving, texturing, increasing hole size
Ball concave cuts, hollowing, shaping, carving. Useful for wood, stone, metal engraving.
Ball nose cone rounding edges, surface finishing, tight spaces, and angles.
carbide ball nose cylinder- contour finishing
Ball nose tree (also known as tapered) concave cuts and rounding edges
Cone rounding edges, surface finishing, tight spaces, hard to reach areas.
Cylindrical contour finishing and right-angled corners
Cylindrical end cut contour finishing
Carbide Cylindrical no end cut contour finishing
Flame channel work and shaping
Inverted cone v-cuts and rear-side chamfering
Oval die grinding and engraving
Pointed tree concave cuts, rounding edges, access to hard-to-reach areas, and acute angles.
Rounded tree concave cuts and rounding edges
4.Service supplied:
Full types for choice
OEM&ODM
Competitve price,stable quality,short lead time
Solid carbide burr,long shank carbide burr,carbide burr set supplied
Can engrave as requirement
Package:extension tube for one pieces(the color could be blue,yellow)
5.The details of three different types of cut shape of carbide burr:
Single cut burrs are primarily for general purpose fluting,milling,and cleaning,which produce long chips,and are ideal for heavy removal of material.
Double cut burrs creat small chips and a good finish,which are efficient at stock removal in harder materials.The additional flute reduce pull and increase operator control.Best for medium to light removal of material.It can be used at slower than normal speeds.
Coarse cut burrs(aluminum cut burr) remove stock quickly,and provide large flute area in softer ferrous and non-ferrous and non-ferrous materials.
Features: This device has the function of stripping optical fiber
Stripped Length: Max 30mm
Heating Mode: Normal mode/Power-saving mode
Temperature Setting: Four types of temperature: 60,80,100,120
Fiber Clamped Mode: Serials of fixtures: FH-2,FH-4,FH-8,FH-12
Power Supply: DC 12V2A adopting the power adaptor
Dimensions: 117.5(L) X 46(D) X 28.5(H) mm
Weight: 320g
Warranty:
12 months
Place of Origin:
Guangdong, China
Brand Name:
Rawsuns
Model Number:
ev kit
Type:
Asynchronous Motor
Frequency:
200
Phase:
Three-phase
Certification:
CCC, ce
Protect Feature:
Waterproof
AC Voltage:
380-576V
Efficiency:
IE 2
name:
Rawsuns high torque 50-200KW electric vehicle conversion kit car
Motor Rated:
50-200KW
Motor Peak:
25-120KW
Rated Torque:
80-1200N.m
Peak Torque:
180-2800N.m
IP grade:
IP67
rated speed:
955-3000rpm
peak speed:
2700-6000rpm
motor type:
PMSM
application:
truck bus boat
Items Parameters
Splicing Type SM, MM, DS, NZDS
Splicing Loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS)
Return Loss >60dB
Splicing Mode Manual, Half Auto, Auto
Fiber Alignment Core to Core Alignment by PAS technology
Applicable Fiber Cable indoor and 0.25mm,0.9mm fiber, SOC connector(option)
Splicing Time 9s
Heat Time 30s Auto Heat
Cleaved Length 8 16mm
Fiber Image/ Magnification 300/150 times
View Display 4.3 inch digital high-quality LCD screen
Tension Test Standard 2N (option)
Heat Shrinkable Sleeve 60mm, 40mm and serials heat Shrinkable Sleeve
Battery Capacity 300 cycles splicing and heating, 3 hours charging time
( splicing and charging at same time)
Battery Life Cycling charge 300-500 times, easy to replace battery
Electrodes Life 3000 splicing, easy to replace electrodes
Power Source â?¤20W
Interface USB Convenient data download and software update
Construction Lighting Built in high brightness, wide range of lights, easy to
operate at night
Power supply Built in lithium battery 5200mAh 11.1V; external adapter,
input: AC100-240V, output: DC13.5V/4.5A
Operating Condition 0-5000m above sea level, Temperature: -10-60,
Humidity 0 95%RH (No dew)
Weight 1.7 KG (including battery)
Dimension (LxWxH) 150mm(L) 135mm(W) 142mm(H)
Petroleum Kinematic Viscometer for conforms to GB/T 265-1988 "Measuring and calculating method for kinematic viscosity of petroleum products", which is applicable to test the kinematic viscosity of liquid petroleum products (Newtonian liquids). It is used to measure the time when a certain volume of liquid flowing through a calibrated glass capillary viscosimeter under the gravity at a constant temperature. The product of capillary viscosimeter constant and flow time is the kinematic viscosity of liquid at that temperature.
Current Transformer Analyzer is new product created after widely adopt customers advices and deep theoretical study. It is based on the automatic FA Series Transformer Tester General which is produced by our company that is widely acclaimed and applied. The adoption of high-performance DSP and ARM, advanced manufacturing technology ensure a stable and reliable product performance, full-featured, high degree of automation, high efficiency, in the domestic leading level, they are the professional testing equipments for transformer check in power industry.
BINGO has been doing nearly 10 years in the auto parts and home appliance metal stamping molds designing and manufacturing.The staffs here are well trained, experienced, happy, full of passion, responsible and hard-working, we are sure we can serve you well.
ONLINE WATER ANALYZER
Vasthi Instruments are global leaders in manufacturing of Water Quality Analyzer,Total Nitrogen Automatic Analyzer,Online NH3-N Analyzer,VOCs Online Water Analyzer,Water Quality Monitoring Buoyâ??s,Series Multi Parameter Water Analyzers,Water Quality Auto Sampler,TP Automatic water Quality Analyzer and have been supplying instruments to customers worldwide, Our multidisciplinary team of scientists, physicians, engineers, and regulatory consultants with decades of global experience brings you the quintessential mechanism that provides complete safety accuracy and durability. Vasthi Instruments was formed with visionary thinking and innovative ideas resulting in innovative products and solutions. We enhance our product quality by the continuous process of research and development. We have WIDE range of models to suite various site conditions and processes.
Many power systems, railway systems, large-scale petrochemical plants and enterprises have a lot of electrical equipment whose internal insulation are mostly oil-filled insulation type, and therefore, test on insulating oil dielectric strength is common and necessary. To meet the needs of the market, we have developed and produced a series of insulating oil dielectric strength testers according to national standard GB/T507-2002, industry standard DL429.9-91 and the latest Electric Power Industry Standard DL/T846.7-2004 by ourselves. This instrument, by using a single-chip microcomputer as the core, can operate in full automation with high accuracy, greatly improving work efficiency and reducing the labor intensity of workers. Moreover, it is small in size and convenient to carry.
Major Technical Indicators
1. Output voltage: 0-100KV (optional)
The Transformer short-circuit impedance tester comes with an adjustable power output. Regardless of single-phase or three-phase transformers, only one connection is required, and the instrument can complete the measurement of all winding pairs. The test and connection are simple.
Main technical indicators and conditions of use
Measurement accuracy: voltage, current: 0.2 level
Power: COS>0.1: 0.5 grade; COS 0.1: 1.0 grade
Impedance: COS>0.1: 0.5 grade; COS 0.1: 1.0 grade
Voltage measurement range: AC 3V300V
Internal power output range: voltage 0~250V, current 0~10A
Current measurement range: AC 0.2A 20A
Working temperature: -10-50
Working humidity: 80%
Working power supply: AC220V ±10-50Hz ±1Hz
Dimensions: 360mm 220mm 150mm
Weight of the instrument: 20Kg
14875 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
