QUICK 967 220V digital temperature soldering station anti-static Product Features : Imported from Japan, ceramic heater, tip and heating element with international brands together Handle special lightweight, suitable for prolonged use. Anti-static design, prevent static leakage and damage delicate SMD components. Fast heat up, the instantaneous temperature compensation, temperature control accurate, stable. Special temperature locking device, prevent staff hackneyed temperature. QUICK 967 ESD built-in advanced micro-computer, digital adjustment and temperature display. Especially suitable for manual placement of SMD components, the rework and ordinary line components, welding, and other welding work for different process requirements. Product Specification : Model: Quick 967ESD Power: 60W Input voltage: AC 220V Temperature control range: 200 C-480 C Temperature stability: ±1 C Tip-to-ground impedance:
QUICK 203 soldering station is especially suitable for manual placement of SMD components, repair and welding of the ordinary in-line components, especially higher level of lead-free products, higher quality welding work. Quick 203 digital temperature soldering station Lead Product Features : Designed for lead-free soldering design Astonishing rate of temperature increase, the mixture was increased from room temperature to 300 �° C never exceeds 20 seconds. Intelligent perfect welding, plenty of power and change, depending on the size of solder joints, then solder joints be able to complete a perfect welding, can effectively prevent cold welding caused not firmly connected. Extraordinary heat recovery skills, the magic temperature compensation speed can solve the contradictions of temperature lead-free soldering process, lead-free soldering tool, an indispensable tool for certain low temperature conditions welding. Extend tip life, welding relatively lower temperature greatly extend the life of the tip. Performance Parameters : Temperature adjustment range: 50C -600C Temperature stability (no load): ± 2C Input voltage, frequency: 220V/110V 50Hz/60Hz Output voltage, frequency: 36VAC 400KHz Maximum power: 60W Heating time: (20C -350C) The temperature dropped from: 30C Tip-to-ground resistance:
ChargerLAB POWER-Z MF003 Apple PD Charger Tester Charging Head Network Tester, MF003 POWER-Z PD Charger Tester Charging Head Network Tester Voltage Current Detection. If the tester does not respond when connected to the computer, check the following steps: 1. Check whether the connected interface is correct; 2. Replace the cable, some cables have no data transmission function, 3. Replace the USB port. 4. Replace the computer, the software only supports Windows10, not other operating systems. Description: 1. The ChargerLAB POWER-Z MF003 main housing part of ChargerLAB POWER-Z MF003 is made of a single piece of aluminum alloy and is made by one-piece molding process. 2. Currently, only current less than 3A is supported during power measurement. Built in 1020mAh battery is convenient for immediate use, and an indicator light is on when charging. 3. The large-screen display can show users more and more complete products. On the side, there are the charging status indicator, three function selection buttons, and the USB-C input interface. 4. On the top of the POWER-Z MF003 are a switch, a buzzer and a Micro USB port, which can be used to charge the device or connect to a computer for firmware update. 5. There is a port for light on the button and one Type-C port on the side.
BAKU 601D LED Digital Display Hot Air SMD Rework Station, Soldering Iron Heat Gun Kit 2 in 1 for BGA Phone Welding Repair. Features: 1. Small Size. Save working space. 2. Hot Air Rework Station and Soldering Station 2 in 1. 3. Soldering station and heat gun are used microprocessor PID temperature regulation. 4. The system has automatic cold function. When it s cooled to 100 degree Celsius, it will be power-saving mode automatically. 5. This helps to extend the heating units life and protect hot air heat gun. Attention: Be careful when operate with high temperature. Do not use it near to the flammable and explosive gas and objects. The air outlet is really hot that can burn body. When the hot air gun is working, please do not leave your position. Do not touch the hot air gun by children. After using be sure to cool down the machine and put it in safety place. When it s turn off, the heating tube will gush out cool air temporarily. During cooling time please do not take out the power plug.
iFace is only a matrix tester not a programmer, it doesn't fix face ID issue or do any program work, so It only for the ones who do massive Face ID repair or testing work. Note: it can t unlock faceID iFace Matrix Tester dot projector tester: to test move a little higher and move a little lower. Support X/XS/Xr/Xsmax,/11Pro and some Pad
JC Dot Matrix Detection Module For phone pad Face Testing Repair.Support: X-11Pro Max Pad A12X Support to check if the face dot matrix is normal, and the functions like fuse,NTC disconnected, I2C disconnected, short circuit etc. Support dot matrix encrypted data read & backup, the burning function will be opened in future. Need Connect with 1000s to use repair the dot matrix face inaccurate positioning problem. The original chip encrypted data needs to be read.
LB Dot Matrix Tester Fix phone Face ID Not Working On X-12 Pro Max. read the data of Dot projector, Support: X-12Pro Max / Pad A12X, LB Dot Matrix tester Fix phone Face ID Not working on X-12 pro max. Support dot matrix encrypted data read & backup, the burning function will be opened in future. Support to check if the face dot matrix is normal, and the functions like fuse,NTC disconnected, I2C disconnected,short circuit etc.
Mijing Dot Matrix Face ID Repair Holder Fixture, Support phone X-11 pro max Lattice Repair, MJ Front Facing Camera Repair Fixture for Fix Face ID not working.
WL tin planting Steel Mesh For Phone Face ID / dot matrix / original color / tail plug small plate tinned steel mesh, Precise hole position enough tin planting.Accurate positioning, al-tin planting, one-time molding non-tin adhesion, non-tin connection, easy to disconnect Steel mesh material: steel Product name: ip x-11pro maximum Face ID /dot matrix/original color/tail plug small plate tinned steel mesh Features: not easy to deform, prevent heating and bulging accurate hole position, one-time molding Applicable models: X-XR-XS- XS MAX-11-11PRO-11PRO MAX Stand by XR-XS-XS MAX 11-11PRO-11PRO MAX Surface dot matrix original color 11pro tail plug small plate planting tin Good toughness, high temperature resistance, Heated anti-drum design Planting tin is more suitable with continuous bending and full of toughness Note: The manual measurement is wrong the actual size is subject to the actual product
JC Dot Matrix cable for Phone X-13 Pro Max Face ID repair. JC Dot Matrix Flex Cable is used to repair Phone Face ID lower/higher issues. JC dot projector lattice IC chip for Phone 13/13Pro/13 Pro Max/13 mini face ID repair. JC Dot projector flex cable used with JC Pro1000s Dot Matrix Module or JC V1S dot projector board. JC Face ID Dot Flex Cable For Phone X/XS/XS MAX/11/11PRO/11 Pro Max/12/12Pro/12 Pro Max/12 Mini/13/13Pro/13 Pro Max/13 mini. JC dot matrix flex cable full set 13pcs(X-13 Pro Max): 1x JC dot matrix flex cable for Phone X. 1x JC dot matrix flex cable for Phone XS. 1x JC dot matrix flex cable for Phone XS MAX. 1x JC dot matrix flex cable for Phone XR. 1x JC dot matrix flex cable for Phone 11. 1x JC dot matrix flex cable for Phone 11 Pro. 1x JC dot matrix flex cable for Phone 11 Pro Max. 1x JC dot matrix flex cable for Phone 12/12 Pro. 1x JC dot matrix flex cable for Phone 12 Pro Max. 1x JC dot matrix flex cable for Phone 12 Mini. 1x JC dot matrix flex cable for Phone 13. 1x JC dot matrix flex cable for Phone 13 mini. 1x JC dot matrix flex cable for Phone 13 Pro/13 Pro Max. Tools required: JC Face lattice detection module (JC Dot Matrix Module) JC Pro1000s, or JC V1S V1S dot projector board.
Mijing K33 Pro 3 in 1 Face ID repair holder front facing camera repair fixture for Phone Dot Matrix repair tools, Face Lattice tin planting fixture support for Phone X XS XR XS MAX 11 11 Pro 11 Pro Max, MJ K33 Pro 3-in-1 for fix Phone Face ID not working, mobile phones face lattice repair fixtures for Phone XS XS MAX Phone 11 Pro Max. Mijing K33 Pro 3 in 1 Front Facing Camera Repair Holder Fixture For Phone Phones Face ID Not Working Mijing K33 Pro 3-in-1 Fixture : Repair the disassembly area / Chip IC repair area / Face Lattice tin planting area Product Features : Made of high quality durable material. Convenient to fix the soldering net. Specially designed for Phone X / XS / XS Max / XR / 11 / 11 Pro / 11 Pro Max / 12 Mini / 12 / 12 Pro / 12 Pro Max. Used to repair mobile phone motherboard IC chip. Make your repair work easier. We promised all products are new condition, but this item is easy to get scratched,there may be some scratches and fingerprint on the surface,please make sure you do not care before your order.
Magico iFace tool face dot matrix projection repair detector for Phone X XR XS Max 11 Pro Max Face ID repair tools, Dot Projector Programmer and dot matrix flex cable for Phone Face ID higher lower repair. Magico iFace Tool Dot Projector Programmer For Phone X-11 Pro Face ID ã??Higherã??Lowerã??Repair. Package Features: Solve Face ID Not-working Problems: Move Phone a little lower/higher, Face ID is Not Available, Face Not Recognized, Unable to activate Face ID on this Phone, etc. Support Face ID Fusion, Offline Data Read & Write, Program Burning & Erasion; with Free Update! Support Offline, Power-Off & PC-free Data Saving! 3rd Generation FPC! Low Energy Consumption! No Power Leakage!
JC V1S/V1SE Headphone Speaker Flex Cable Detection Board FPC Sensor Flexible Cable for Phone True Tone Face ID Repair. Functions: 1. Support to repair phone x face ID & truetone problem caused by receiver FPC Failure.o require original receiver FPC. 2. Receiver FPC detecting adaptor is for working on JC V1S, which support repair 8-12 Pro Max full series face lD true tone problem caused by receiver FPC failure, no require original receiver FPC. JC V1S receiver flex cable detection board works with the JC V1S host, it's used to detect Phone true tone function,and repair Phone Face ID and true tone functions without original earpiece speaker with sensor flex cable. Models: 1. JC V1S/V1SE receiver FPC board. 2. JC earpiece speaker receiver FPC sensor flex cable for Phone
Replacement For Phone X-11 Pro Max Infrared FPC Flex Cable.i2C InFrared FPC Face ID Flex Cable For Phone X-11 Pro Max Repair. Feature: High Precison Pad Through Hole Design, More Stable Welding Pricise Alignment Welding By One Operating, Making Easier Maintenance Laser Cutting Smooth Craftmanship , Soft And Durable Original Apperance, High Technology , Reduce Rework
GREENMAX foam densifier Mars series C50 is specialized in compacting EPS&EPE and could save large space offering you convenience. Mars series compacts high-qualified EPS&EPE material and it is easy to transport. Applicable materials include PSP, XPS, PSP/food trays, and cups. The throughput of GREENMAX foam densifier MARS C50 is 50kg/h, and the compression ratio of EPS&EPE is 90:1.
Phone Dot Matrix Repair Accessory For X XS XSMAX 11 11pro MAX Face ID Repair Bracket Front Camera Rework Tool. i2C Face ID Dot Matrix Holder Front Face Camera Fix Clamp Tool For iPone X-12 PRO MAX, Compatible For Phone X/XS/XS MAX/11/11 Pro/11 Pro Max/12 Mini/12/12 Pro/12 Pro Max.
dot matrix alignment Face ID axis extension flex cable for Phone X-13 Pro Max. Wylie dot matrix extension cable for Phone Face ID function detection repair. Features: 1. WYLIE Dot Matrix Lattice Alignment Flex Cable for Face Lattice Maintenance Repair. 2. After the Lattice repair is completed, there is no need to apply Glue. 3. The extend cable can cooperate with the fixture to test the glue in advance. 4. Paste the glue to achieve 99% perfect alignment of the Lattice. 5. Dot matrix alignment extension cable suitable for Phone
i2C 7 IN 1 Lattice Face Precision Calibrator for Phone X/XS/XSMax/XR/11/11Pro/11ProMax,High hardness aluminum alloy for fast fix Lattice Face Precision Calibrator. Features: 1.Fast fix 2.Multi-model adaptation 3.High hardness aluminum alloy 4.Auxiliary fit and precise alignment
CNC the lathe uses a standard machine transposition machine to transpose and the pieces and bodies are made of standard material . Cemented carbide, coated cemented carbide and high speed steel. CNC lathe clamp indexable tool types are cylindrical tool, outer screw.Cutting tool hole plus cutting tool (including center drill, boring cutter, tap, etc.)
i2C Battery Data Test Guide Cable Battery Start Extension Cord Compatible Phone Battery Repair. I2C battery test lead flex cable for i2c I6S programmer. Function introduction: No-removal battery extension test + guide in one step 1. Blue/green light on - Can detect and modify battery data 2. Yellow/Red light on - Bootable mobile phone popup Features: Dual-function switching use, test and guide are all done Replacing the battery guide shows the real battery data Change battery automatic boot/test dual function Dual LED light reminder, green /blue test, red light/yellow light guide FPC flexible material can be bent and folded for use No-removal battery extension test to modify data, guide the mobile phone pop-up window Support 5SE-13Pro Max models Operation method: Snap one end of the battery guide cable to the corresponding socket of the battery. The other end is buckled on the detection and reading device. Move the toggle switch to the "test function" end, and the blue or green light turns on to detect and modify battery data.
