Test Equipment A340E Automatic Transmission training bench Product introduction Based on the electrically controlled automatic transmission of Toyota A340E, and with the speed-regulating three-phase motor as the power source, the training platform can perform the actual operation of various test
Semiconductor Test Probe Pogo Pin SCPB038 for IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCFB038 we will introduce is 0.38 mm in barrel diameter and 6 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1.5 amps. The typical maximal contact resistance is about 100 milliohms. The plunger can be pressed at a distance of up to 1 mm. But it is better to be pressed at a distance of 0.6 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.6 mm, the loaded force is about 25 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Ph, Au on Ni Plated Bottom Plunger: BeCu, Au on Ni Plated Top Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 1.5 amps Contact Resistance: 100 milliohms max Bandwidth: 5.3 GHz at -1dB Propagation Delay: 27 ps Inductance: 1MHZ at -0.02809 uH Captance: 1MHZ at 0.876347 uF Specifications: Full Stroke: 1 mm Rated Stroke: 0.6 mm Spring Force: 25 7 gf at load 0.6 mm Mechanical Life: about 200000 cycles Company Information: Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
hand shoe tacks used in making furniture, shoes and for farstening things
ANTI-LOCK BRAKING SYSTEM TRAINER SIMULATOR Autotronics Fundamental and Advance Autotronics Simulator. 1. This trainer provides a realistic simulation of automotive anti-lock braking (ABS) electrical systems with real time results and modular panel layout. 2. The system...
The training bench is based on the Toyota A340 electronically control automatic transmission assembly and fully display the internal structure and working process of the electronically control automatic transmission. comprehensive function system, operating normally, and also...
Auto Trainers Electrical Teaching Board Engineering Educational Equipment - Buy Automotive Electrical Training Stands,Automotive Electrical Education Bench,Automotive Airbag Teaching Board Product on ZHONGCAI
Auto Trainers Electrical Teaching Board Engineering Educational Equipment - Buy Automotive Electrical Training Stands,Automotive Electrical Education Bench,Automotive Airbag Teaching Board Product on ZHONGCAI
Battery Contact Pin Test Probe BIP80 Series for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP80 series of battery contact probes. The outside diameter is usually 0.8 mm and total length is 11 mm. There are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.27 mm (50 mil) Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms (Maximum) Full Stroke: 1 mm Rated Stroke: 0.9 mm Spring Force: 60 gf (2.4 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: BeCu, Gold Plated
The device has an open design, is equipped with refrigeration pipeline equipment, and is equipped with various circuit schematic training boards. The electrical components required by the circuit are installed on the training board. Students can perform the refrigeration...
This equipment is suitable for skilled application-oriented talents with professional theoretical knowledge and theoretical skills of air-conditioning and refrigeration technology, engaged in technical upgrading, transformation design, installation, commissioning, maintenance...
Household Refrigerator Intelligent Temperature Control Electrical Training Assessment Device intuitively displays the electrical system structure and working principle of the household refrigerator intelligent temperature control refrigerator, which is convenient for teaching...
This device is a product developed according to the teaching and training requirements of vocational education, which is based on ability, oriented by employment, closely combined with the skills requirements of actual production and occupational positions.
Welcome to wholesale high quality Split Air Conditioner Training Assessment Device at competitive price from professional Split Air Conditioner Training Assessment Device manufacturers and suppliers in China. Contact our factory for quotation and pricelist. We provide Split...
Welcome to wholesale high quality Heat Pump Split Air Conditioner Training Device at competitive price from professional Heat Pump Split Air Conditioner Training Device manufacturers and suppliers in China. Contact our factory for quotation and pricelist. We provide Heat...
Welcome to wholesale high quality General Air Conditioning Installation And Debugging Training Device at competitive price from professional General Air Conditioning Installation And Debugging Training Device manufacturers and suppliers in China. Contact our factory for...
We provide Automotive Crdi Engine Injection Control System Trainer with great production line and offer fast delivery, professional team, effiective function, friendly service, technology support.
Product description The Portable single-phase electric meter Test Equipment is used for grid corporation of measurement and energy test center, management department of power supply bureau, national energy measurement of testing authorities, and also used to test each kind of single phase kWh meter of industries and mining enterprises as well as electric meter manufacturers. Meanwhile, the calibrator also can be used as one high precision standard power source, ac voltage source and current source. Technical index Electrical parameters Accuracy class 0.05%, 0.1% Power Supply One Phase AC 100-265V, frequency 50/60Hz. AC Voltage Output Range 57.7V, 100V, 220V, 380V; max 500V Adjustment range (0-120)%RG(1) Adjustment 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional. Stability 0.01%/120s Electrical parameters - continued Distortion 0.2% (Non-capacitive load) Output load max 25VA Measuring accuracy 0.05%RG AC Current Output Range 200mA, 1A, 5A, 20A, 60A(100A) optional; max 120A Adjustment range (0-120)%RG Adjustment 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional. Stability
Product description Single-phase electric meter field calibrator is suitable to test various types single phase meters on site and can also be used to test alternating current parameters. Feature 1. Current clamp and meter combined together, colorful and touch-screen display; 2. One AAA Li-battery can continuously working 4 hours; 3. Wide voltage, current measurement range, voltage range: 15-300V, current range: 0.05-120A; 4. Display all the measuring parameters in one screen; 5. Current clamp has automatic compensation function, 0.2% class accuracy; 6. Current clamp has automatic calibration function; 7. Integration design of the meter and clamp; 8. 16bit high accuracy AD switch 32 bit ARM processor core. 9. Automatically record and save 999 groups calibrate data; 10. Micro-multifunction optic sampler Technical index 1. Manual/automatic test inductive single phase meters; 2. Manual/automatic test electric single phase meters; 3. Measure virtual value of alternating voltage (15 300Vrms); 4. Measure virtual value of alternating current (50mA 120Arms); 5. Test parameters: active power, phase angle of voltage and current, frequency and etc; 6. Automatic store testing data, and 999 group test results can besaved.
Product description The Single-phase capacitance and inductance tester is specially developed for the problem of measuring the capacitance value of the capacitor on the substation. Technical parameters Instrument measurement range and accuracy: a. Capacitance measurement (1) Measurable capacitance range (2) Measurable capacity range (3) Measurement accuracy (4) Resolution b. Current measurement (1)Current measurement range (2)Measurement accuracy (3)Resolution: 0.01A c. Inductance measurement (1)Inductance measurement range: small inductance mode 0.1mH 5mH large inductance mode 5 mH 50H
Overview: Generator Rotor AC Impedance Testing Instrument is a special instrument for determining whether the turn-to-turn short circuit exists in the generator rotor winding, and can manually and automatically (unidirectionally or bidirectionally) measure many parameters of the generator rotor such as voltage, current, impedance, power and rotating speed.Generator Rotor AC Impedance Testing Instrument is the latest enhanced AC impedance tester launched by our Company. The instrument adopts the state-of-the-art high speed microprocessor technology with more powerful functions, preferable performances and more convenient use. The Tester has a series of characteristics such as high reliability, easy operation, high test precision, being compact and lightweight and etc., and currently is in the domestic leading level. Major Technical Indicators Temperature: Relative Humidity: 0 1% FS+2d 0.1 0.5% FS+2d Frequency 40-75HZ 0.2% Weight 5kg
