1.Independent tire pressure technology. 2.Fully automatically digital operation,four automatic inflater modes ;One key preset inflatable ,stop automatically when full ,fledgling also can operate. 3.Come with independent 2000 mA lithium battery, farewell the long line bondage, one charge, multiple use, basketball, bicycle,If you can think of anything that needs to be inflated, you can do it! 4.When fully charged, 4 tires can be filled at one time and 10 tires can be inflated. 5.Equipped with inflatable wire groove and power cable groove, so as to avoid the pursuit of perfection you mad. 6.Enhanced permanent magnet motor, pure copper wire, more powerful power, lower energy consumption. 7.Dual mode charging, no need to worry about running out of power. The delivery time: 48 hours
1. Unique and cool appearance inspired by space capsule,aims to bring you the enjoyment of space capsule. 2.Fully automatically digital operation,four automatic inflater modes ;One key preset inflatable ,stop automatically when full ,fledgling also can operate. 3.Come with independent 2000 mA lithium battery, farewell the long line bondage, one charge, multiple use, basketball, bicycle,If you can think of anything that needs to be inflated, you can do it! 4.When fully charged, 4 tires can be filled at one time and 10 tires can be inflated. 5.Intelligent chip protection ,automatic power off when overload,safety not to hurt car. 6.Enhanced permanent magnet motor, pure copper wire, more powerful power, lower energy consumption. 7.Equipped with shock absorption package, strong power can also reduce noise 8.Dual mode charging, no need to worry about running out of power. The delivery time: 48 hours
1.Delicate and cabinet ,size as small as power bank. 2.One key preset inflatable ,inflate accurately,Digital display is clearer, tire pressure memory function is easier to operate. 3.Reinflation quickly in 30s ,it will stop automatically when full 4.Enhanced permanent magnet motor, pure copper wire, more powerful power, lower energy consumption. 5.Anti-skid cushion design effectively prevents movement and reduces noise. 6.Hand feel paint surface is more high quality. 7.Intelligent chip protection ,automatic power off when overload,safety not to hurt car.
1.The utility model patented fan package, stronger suction, and the two-speed adjustment can be used to suck at will. 2.Vortex air duct, double-layer filtration not let go of the sundries; detachable pinhole filter so no need to replace the filter. 3. Universal Type-C interface ready to be charged; compatible with most mobile phone and digital product charging cables , easy to charge anytime, anywhere. 4. Built-in dual protection smart chip, automatic shutdown protection when the battery temperature is higher than 80 â??. 5. Large-capacity 3-cell lithium battery, long-lasting battery life, ready to use at any time. 6. Large-capacity dust bucket, split type, larger installation; detachable split type dust removal for the effortless cleaning 7. Low operation noise without disturbing.
Electric drill toolbox, hardware tool set, household power tool set
For more information, please contact me
1. The air volume is surging freely, and the air is quickly replenished in 10 seconds 2. Simple operation, turn on the power, unscrew the valve, connect and fix the preset tire pressure, complete with one key 3. No need to charge, link the power supply is ready. 4. Three digital display operation functions, accurate digital display; night vision pressure measurement / preset tire pressure / automatic charging and stopping. 5.LED lighting, strong lighting effect, high brightness, durable. 6. Unique blade cutting surface design, the appearance is more cool.
1. The air volume is surging freely, and the air is quickly replenished in 10 seconds 2. Simple operation, turn on the power, unscrew the valve, connect and fix the preset tire pressure, complete with one key 3. No need to charge, link the power supply is ready. 4.LED lighting, strong lighting effect, high brightness, durable. 5. Unique blade cutting surface design, the appearance is more cool
1.All copper motor ,22cylinder power ,second speed full 2. Simple operation, turn on the power, unscrew the valve, connect and fix the preset tire pressure, complete with one key 3.No need to charge, link the power supply is ready. 4.Three digital display operation functions, accurate digital display; Night vision pressure measurement/preset tire pressure/automatic charging stop. Embedded storage, say goodbye to tedious. 5.LED lighting, strong lighting effect, high brightness, durable
1.10000pa, utility model patented fan package, stronger suction. 2. Vortex air duct, double-layer filtration not let go of the sundries; detachable pinhole filter. 3. Upgraded overload protection safe not to hurt the car; double fuse protection and power-off protection for the overload short circuit. 4. With a 3-meter 12V vehicle power cord to achieve no dust everywhere. 5. A variety of nozzle designs easy to use with just one vacuum cleaner. 6. Large-capacity dust bucket with larger installation; detachable split-type dust removal for effortless cleaning.
1. One-stop solution to all kinds of household car cleaning problems 2. Ultra high appearance level of wireless mini makes life more delicate and free 3. Dust with super suction is swept away 4. Double noise reduction design to enjoy another quiet life 5.Hypa HEPA filter effectively filters dust particles and can be washed repeatedly
1. One-stop solution to all kinds of household car cleaning problems 2. Ultra high appearance level of wireless mini makes life more delicate and free 3. Dust with super suction is swept away 4. Double noise reduction design to enjoy another quiet life 5.Hypa HEPA filter effectively filters dust particles and can be washed repeatedly
1. High power and super suction, more thorough dust absorption, can be washed and filtered haipa, dry and wet dual use, car charge power supply, 3 meters above long line, where to suck, large capacity dust bucket, more garbage, office, car, home can be used. 2. High-power super suction, more thorough dust absorption, equipped with efficient and strong DC motor, the strongest suction can be up to 7000Pa, unique motorTurbocharged aluminum blade design, can prevent overheating, deformation, abnormal sound smell, can easily absorb melon seeds, potato chip residue, hair, dust,scraps, coins, etc 3.2 Layer filter system + washable hypa. The primary filter can intercept large particles of dust and residue, while the second layer HEPA filter can pass through Filter dust as small as 0.3 micron, effectively prevent secondary pollution, dust cup and two layers of filter can be washed, can avoid excessive dust adhesion cause congestion. 4. Large capacity, translucent visual dust bucket, one key split design, convenient and easy to use, the dust and garbage inside can be poured out. 5. The body is only about 1kg, equivalent to a two-month-old baby cat. Even with all kinds of vacuuming tubes, it won't weigh much, girl It is also easy to use. 6. Air vents on both sides, ingenious design, effective noise reduction, there are children asleep in the car, also not affected.
Cable Harness Probe Pogo Pin CHL165-HQ(8.3) for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHL165-HQ(8.3) harness probe we will introduce here is 1.65 mm in diameter and 35.8 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 100 milliohms. It is suggested the plunger be pressed at a distance of 3.5 mm at most when this probe works, although the plunger can move as far as 5.3 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 3.5 mm, its loaded force is about 113 gf, namely 4 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 100 milliohms Full Stroke: 5.3 mm Rated Stroke: 3.5 mm Spring Force: 113�±35 gf (4 oz) at load 3.5 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: Beryllium Copper, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Spring Pogo Pin Semiconductor Test Probe SCPC028 Applied to IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCPC028 we will introduce is 0.28 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold or gold clad phosphor bronze. The bottom plunger is made from beryllium copper plated with nickel and gold. The top plunger is made from SK4 plated with nickel and gold. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2 amps. The typical maximal contact resistance is about 150 milliohms. The plunger can be pressed at a distance of up to 1.05 mm. But it is better to be pressed at a distance of 0.7 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.7 mm, the loaded force is about 25 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Phosphor Bronze/Gold Clad Phosphor Bronze, Au on Ni Plated Bottom Plunger: Beryllium Copper, Au on Ni Plated Top Plunger: SK4, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 2 amps Contact Resistance: 150 milliohms max Bandwidth: 8.5 GHz at -1dB Inductive Reactance: 1MHZ at -0.0788 uH Capacitive Reactance: 1MHZ at 0.3165 uF Specifications: Full Stroke: 1.05 mm Rated Stroke: 0.7 mm Spring Force: 25�±7 gf at load 0.7 mm Mechanical Life: about 100000 cycles Company Information: Centalic Technology Development Ltd was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Suitable for ICP/ICP-MS PFA dissolved sample tank15ML PFA sample dissolving tank is also called sample dissolving cup, digestion bottle, tubular bottle, etc; It is widely used for digestion of geological, geological and mineral experimental samples and dissolution of samples at medium and low pressures, supporting ICP-MS/ICP-OES analysis and other trace analysis experiments. According to the requirements of the experiment, there are U-bottom, flat bottom and V-bottom designs. It is used with the electric heating plate of our company, especially the perforated digestion instrument. our advantages: 1. The appearance is translucent, the inner wall is smooth, no water hanging, easy to clean; 2. High and low temperature resistance: 200 260 (the best closed condition is not more than 150); 3. Thread interface, good sealing; 4. Very low dissolution and precipitation; 5. Low blank value of metal elements; 6. Physiological inertia, can be implanted in the body; 7. The cover and the body can be numbered without confusion;
EP800 Series Electro-Pneumatic Positioner All model is including:EPA800 Single action,EPC800 Double action,EPB800 for 5200LA actuator Which is used with pneumatic actuator, input 4ï½?20 mA DC The signal is converted into the output air pressure to control the action of the actuator. At the same time, according to the behavior of the executive agency Feedback from the stroke, so that the stroke of the actuator can be accurately positioned according to the control signal. EP800 Series electro-pneumatic positioners can be used for single-action and double-action pneumatic actuators. FEATURES USABLE WITH LOW TO HIGH CAPACITY ACTUATORS By adjusting the built-in capacity control spring, the positioner can be made optimum to the given actuator. A LOW AIR CONSUMPTION The pilot valve is low in air consumption and high in capacity. OUTPUT CHARACTERISTICS SELECTABLE Having a cam within the feedback construction, choices other than the standard linear characteristic are available. COMPATIBLE WITH VARIOUS FEEDBACK TYPES Applicable to the following types by simply exchanging the cam block. * For Linear type actuator : Feedback for Standard lever type EP 8 1 * For Rotary type actuator : Feedback for lever type EP 8 2 * For Rotary type actuator : Feedback for direct connection to driving shaft EP 8 4 REVERSE ACTION PILOT VALVE EASILY AVAILABLE The positioner for double acting actuators can be used as a reverse action pilot valve when combined with a spring return actuator that requires a reverse action pilot. ANTI-PRESSURE AND EXPLOSION PROOF STRUCTURE MARKING ON-SITE ADJUSTMENT POSSIBLE The anti-pressure and explosion proof construction, with the terminal and coil blocks enclosed together in one package, makes it possible to remove the positioner cover for inside inspection or span adjustment even in an explosive ambient. INTRINSICALLY SAFE CONSTRUCTION FOR A WIDE SCOPE OF APPLICATIONS The intrinsically safe construction (torque-coil type: EP82) cover terminals and coil as one package. This, combined with The adoption of the specified zener barrier, makes the unit applicable in all hazardous gas location ( including Class 0 area) ranging from low ( 40 ) to high ( 60 ) temperature environment.
MDC-K400 Square and Round Billet Taper Measuring Instrument The product description The square, rectangular and round billet taper measuring instrument adopts high-precision displacement sensor as the measuring element, which has high precision and good repeatability. The measuring trolley ensures that the measuring sensor is in the correct position. The round copper tube taper measuring instrument ensures that the sensor is located at the diameter of the measuring section circle. Due to the characteristics of the round copper tube, one measurement action can measure multiple physical quantities on the copper tube section. The square billet taper measuring instrument can arrange measuring points in four directions and can measure straight or curved surfaces respectively, while the rectangular billet taper measuring instrument needs to install six measuring points to measure the taper of multiple faces at the same time. The product features 1. Use a high-precision vector displacement sensor 2. Battery powered, compact and flexible, easy to carry and use, strong anti-interference ability 3. Use wireless communication function and CRC check technology to ensure no error code and accurate signal transmission 4. SPI all-digital interface, programmable 16-bit A/D converter, with program-controlled digital filtering and program-controlled lossless amplifier inside, fully meeting the measurement requirements 5. High-power rechargeable battery, long standby time, suitable for on-site use of mobile operations 6. The measuring body and the display instrument are connected by wireless WIFI communication, which is easy to use The performance and index 1. Measurable copper pipe length is more than or equal to 1200mm, the measurement range of straight surface and arc surface displacement is 0-10mm, and the measurement cavity size can be customized according to user needs 2. The measuring range of straight face and arc face displacement is 0-10mm, and the measuring accuracy is less than or equal to 0.01mm 3. It can measure single taper, multi-taper, parabolic taper, continuous data acquisition, and continuous working time not less than 72 hours 4. Use wireless WIFI communication technology and CRC verification technology to ensure no error code and accurate signal transmission 5. Operating temperature of the product: 25 85 6. Power supply: 12V rechargeable battery, continuous measurement time is no less than 16 hours, standard USB interface The components of the product 1. A set of measuring trolley 2. Dedicated charger 3. Portable computers and wireless transceivers 4. Data processor discriminating software 5. Calibrator 6. Integrated transceiver system
MDC-K120 Slab Mold Taper Measuring Instrument Overview The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets quality and the continuous introduction of high-precision molds, the current taper measuring instrument in the domestic market generally have low measurement accuracy and complex measurement methods, which restrict the development of production. The new-generation taper measuring instrument developed high-precision inclination sensor, combined with ultra-low power consumption processor, which can quickly and accurately measure the actual taper value of the narrow copper plate of the mold. The instrument is fully functional, easy to use and suitable for slab molds of various lengths. Most of the current slab molds are single-taper, a narrow flat copper plate. The taper value required for production can be achieved by adjusting the angle between the narrow copper plate and the direction of gravity. The taper measuring instrument directly measures the angle between the narrow copper plate and the direction of gravity. According to habits and production needs, the angle is converted into the value of one-sided shrinkage of the upper and lower ports. The main features 1. Easy to calibrate, stable performance, easy to operate 2. Self-supporting, self-aligning, self-balancing 3. High measurement accuracy 4. LCD data reading 5. Fast response, real-time display reading 6. Adjustment of dynamic intelligent system 7. Lithium battery power supply, suitable for on-site use of mobile operations 8. The continuous measurement time is more than 36 hours 9. The sensor adopts multiple protections to meet the needs of on-site harsh environment measurement 10. The weight of the whole system is less than 3.8 kg, and it is equipped with a set of zero-point calibration table, which is convenient for on-site installation and measurement 11. Applicable to various arc, parabolic and straight molds The performance and index 1. Measuring range: 3 3 (measurement length can be customized according to users needs) 2. Measurement accuracy: 0.01mm 3. Temperature range: -25 85 4. Linearity deviation: -0.03mm 0.03 mm 5. The longest usage time after fully charged: 36 hours 6. The longest storage time after fully charged: 2 months The main components 1. Measuring instrument: central measurement and control unit, measuring sensor 2. Measuring stand 3. Standard table: standard surface, support frame, spirit level
SUPERSHINE ROBOT, a professional intelligent machinery manufacturer, focus on the research & development of remote control and auto pilot intelligent machinery, such as remote control lawn mower, auto pilot weed cutter, wireless remote controlled robot chassis kits, autonomous running tracked robot platform, etc. The products adopt the worldâ??s most advanced wireless remote control technology, intelligent autonomous control technology, and Italian mowing technology. We can produce approximately 1000 units of remote control slope mower per month. The machines undergo 100% indoor and field tests to ensure they are qualified and ready to use before delivery. We offer professional technicians who can provide online and on-site training for free. Our current products include: Remote Control Lawn Mower, Crawler Remote Controlled Brush Mower, Rubber Track Remote Operated Slope Mower, Wireless Radio Control Mowing Robot and Wheel Radio Controlled Grass Cutter. Model SSC550-75 SSC550-90 SSC800-150 SSW550-70 SSW800-150 Driving Method Crawler Crawler Crawler Wheeled Wheeled Engine / Power Yamaha 7.5Hp Loncin 9Hp Loncin 15Hp Loncin 7Hp Loncin 15Hp Cutting Width 550mm 550mm 800mm 550mm 800mm Adjustable Cutting Height Yes, by remote Yes, by remote Yes, by remote Yes, by hand Yes, by remote Self Charging Yes Yes Yes No Yes Dimension 1060 x 960 x 810mm 1060 x 960 x 810mm 1170 x 1270 x 910mm 1120 x 920 x 650mm 1170 x 1270 x 930mm Weight 135kg 150kg 240kg 100kg 230kg remote operated weed cutter China manufacturer factory supplier wholesaler radio controlled brush cutter China manufacturer factory supplier wholesaler remote controlled grass cutter China manufacturer factory supplier wholesaler https://wecanie.com/1735.html RC mowing robot China manufacturer factory supplier wholesaler https://wecanie.com/1737.html FAQ Q: Are You Manufacturer Or Trader? A: We are a China manufacturer of garden machinery and construction machinery. Actually, we produce most of the parts in our own factory for better cost and quality control. Q: How About Your Delivery Time? A: Generally, it will take 15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Sometimes we have some in stock. Q: Is Lawn Mower Ready To Use? A: Yes. Before dispatch, Supershine assemble all the parts and set all the parameters. Every mower is 100% tested and strict quality control. Compared with similar products in the European and American markets, we have a huge price advantage and guaranteed product quality, allowing you to spend less money and enjoy the same or even better lawn mowers. We are looking for agents, distributors and dealers of remote control slope mower all over the world, welcome to contact us for more details.
