Product Introduction TKYND full-automatic full-automatic kinematic viscosity tester is a new product newly launched by our company which is used to determine the kinematic viscosity of petroleum products. It is applicable to the national standard GB/T 265-1988. This instrument combines the advantages of our company and the original similar products at home and abroad carries out a new design concept is the older generation of kinematic viscosity tester replacement products. Product Names automatic kinematic viscosity meter automatic kinematic viscosity tester determination of kinematic viscosity viscosity meter automatic kinematic viscosity meter
Product Introduction In the power system factories and enterprises have a large number of electrical equipment. Most of its internal insulation is oil-filled insulation type. Dielectric strength test of insulating oil is a necessary routine test item. In order to adapt to the rapid development of the power industry our company is the first in China to develop a fully automatic oil dielectric strength test system. This series of products according to the latest national standard GB/ t507-2002 the power industry standard dl429.9-91 and the latest power industry standard DL/ t846.7-2004 design and manufacture using microcomputer control mechanical and electrical integration of all automation high test accuracy greatly improve the work efficiency but also greatly reduce the labor intensity of the staff. It is agreed that this series of products is the ideal insulation oil voltage test equipment in China. Product names insulation oil tester oil pressure tester insulated oil pressure tester oil dielectric strength tester insulation oil dielectric strength tester insulation oil pressure tester automatic insulation oil tester microcomputer automatic insulation oil tester automatic oil tester automatic oil tester portable oil pressure test device electrical strength tester
Product Introduction In the preventive insulation test of power equipment it is required to measure the insulation oil parameters of power equipment periodically. The measurement of dielectric loss and resistivity of insulating oil is one of the most important. For a long time most of them adopt the bridge method for measurement which is complicated in operation and the measurement accuracy is affected by many factors thus leading to a large measurement error. With the rapid development of electronic technology and the power industry for small volume light weight easy to operate rapid measurement high precision measurement instrument requirements I refer to domestic and foreign related instruments developed in the domestic leading insulation oil dielectric loss factor and dc resistivity tester. The instrument is designed and manufactured according to gb5654-2007 and related standards. It is controlled by microcomputer easy to use high measurement accuracy high test efficiency and greatly reduces labor intensity.
product brief introduction Product Introduction Automatic Closed Flash Point Tester used to measure the Closed flash point value of petroleum products.Advanced foreign technology is adopted. LCD TET's pure color touch screen displays the man-machine dialogue interface in Chinese. For parameters such as prevalue temperature oil test label atmospheric pressure and test date it has prompt menu prompt input which is convenient and fast.It is an ideal substitute for imported instruments.Widely used in railway aviation electric power petroleum industry and scientific research departments. Product nickname FlashPoint Tester Automatic Closed Flash Point Tester Closed flash point automatic tester closed-cup flash pointfull-automatictester self-motionClosed flash point tester Closed flash point tester
Product Introduction In power system and industrial and mining enterprises have a lot of oil-filled electrical equipment transformer oil and the acid value of turbine oil is a routine inspection items shall be measured acid tester used in transformer oil steam turbine oleic Acid value measuring instrument adopt computer control electric light chemical integration design of full - automatic machine entirely replace the manual operation improve work efficiency reduce the labor intensity of the workers minimize the organic solvents and chemicals to the harm of human body operation simple easy to use strong anti-interference ability stable and reliable. The acid value is the number of milligrams of potassium hydroxide required to neutralize the acid in a gram of mgKOH/g oil and is one of the most tightly controlled quality indicators It is one of the indexes which should be strictly controlled in oil quality. Petroleum products acid tester GB/T264-83Standards developed and produced It is suitable for detection transformer oil turbine oil and anti - fuel oil.Through the comprehensive application of mechanical optics electronics and other technologies the product adopts advanced microprocessor and can realize self-motion function of multi-sample switching titration judge titration end point print measurement results and other functions and the system is stable and reliable self-motion high degree of chemical can be widely used in electric power chemical environmental protection and other fields.
product brief introduction Product Introduction The intermolecular forces form the interfacial tension or surface tension of the liquid. The value of the tension can reflect the physical and chemical properties of the liquid and its material composition. It is one of the important indicators for the inspection of product quality in related industries.Automatic statically tester manufactured by our company applies GB/T6541 standard and measures the surface tension of various liquids (liquid-gas phase interface) and liquid interface tension (liquid-liquid phase interface) based on the ring method (platinum ring method).This method is widely used because of its advantages of simple operation and high accuracy.Widely used in electric power petroleum chemical pharmaceutical food teaching and other industries.
Product Introduction SF6 comprehensive tester is a collection of sf6 micrometer sf6 purity tester sf6 decomposition product analyzer in one concentrate the functions of three instruments in one instrument. One on-site measurement can complete the detection of three indicators greatly saving gas in the equipment. One measurement can save 2/3 gas consumption reduce the workload of users and improve the work efficiency. Product nickname SF6 comprehensive tester fully automatic SF6 comprehensive tester automatic SF6 comprehensive tester
Handheld SF6 Gas Product Introduction We have more than 30 years of production experience recently launched a new generation of automatic intelligent leak detector.It is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users.At the same time we apply our rich technology and experience to this product so that users can enjoy excellent performance and price ratio. The high-tech central microprocessing unit is the core of sf6 gas qualitative leak detector. Its digital signal processing ability can better manage the circuit and process the detection signal. Due to the large number of integrated circuits the number of components in the circuit is reduced by 40% which greatly improves the reliability and efficiency. The microprocessor can monitor the probe and battery voltage at the rate of 4000 times per second. Even the tiniest signal can be captured. It can work stably and reliably in any environment. The sf6 gas qualitative leak detector has added some convenient functions. The seven-level sensitivity increases the sensitivity by 64 times. The three-color leds indicate the degree of leakage in a wide range in a progressive manner and are also used to display sensitivity levels and battery power.Touch keyboard for all operations. Avant-garde long and thin shape design greatly facilitates users to use and maintain. It is very convenient to use the indicator light in the direct range. Product nickname SF6 qualitative leak detector automatic SF6 qualitative leak detector SF6 gas qualitative leak detectorLeak Detector
Application: TKQH-SF6 Series vacuum pumping and inflation device is mainly used for vacuum pumping and vacuum degree determining of magnetic pole SF6 circuit breaker transformer and other SF6 electric appliances when installation operation and maintenance. The entire SF6 gas inflation and vacuum pumping device comprises a vacuum pump a pointer type vacuum gauge a regulating valve a gas transmission pipe and a valve and SF6 circuit breaker necessary control components for maintaining. Features: Quick pumping. Regulate pressure to inflate. Solid structure. High precision thermocouple vacuum gauge.
Toggle Clips Stainless Steel Draw Latch For Toolbox
Summary The Arrester is suitable for testing the internal defects of 10KV and below 10KV MOA (metal Oxide Arrester).Before the annual season of thunderstormsit 's necessary to test metal Oxide using 1mA DC voltage and 0.75U1mA leakage current at Power plants/substations.The equipment was developped according to the requirement of site it 's integrated with DC HV supplymeasurement and control system. it has the characters of small size and light weight. Feature 1.Supply power: AC220V or Charging battery. 2.LCD display test datas. 3.Convenient to carry.
1.Test voltage: 5000V DC 2.Range: 0-1999M 3.Resolution: 1M 4.Basic error: ±5% 5.Power supply: one cell 9V layer-built battery 6.Power source current: about 20mA 7.Environment temperature: 0-40 8.Environment humidity:85% 9.Dimension: 120-70 50mm
Product Characteristics 1. small size, light weight. 2. the measurement process is safe, fast, accurate measurement results. Product Parameters 1.Ambient temperature: -10 C~+50 C 2.Relative humidity: 20~90%(at 40 C) 3.atmospheric pressure:86~106kPa 4.Discharge test voltage: > 2kV 5.Charge time: < 1 minute 6.Power supply: 220V±10% Frequency: 50±1Hz Power < 30vA 7.Dimension: 300 200 180mm 8.Weight: 4KG
Application: TKBLQ-I zinc oxide arrester tester is a special instrument used to test the electrical performance of arresters. The instrument is suitable for live or power failure detection of arresters of various voltage levels, so as to timely detect the internal insulation damp and valve aging and other dangerous defects. TKBLQ-I zinc oxide arrester test instrument is easy to operate and easy to use. The whole measuring process is controlled by microcomputer. It can measure the total current, resistive current and its harmonics, power frequency reference voltage and its harmonics, active power and phase difference. The real waveform of voltage and current can be displayed on the large screen. Features: 1. 5.7 "320 Ã?? 240 LCD, high-speed thermal printer; graphic display, intuitive interface, easy to operate and use. 2. It is applicable to live arrester, power failure or laboratory. 3. The current and voltage sensors are completely isolated, safe and reliable. A, B, C three-phase arrester can be stored as a group of test data. 4. The instrument can test continuously, display voltage current curve, and print data and curve quickly. 5. The internal configuration memory can store 200 groups of test data when power down. 6. With RS232 communication interface, the test data can be exported through the upper computer. 7. High speed sampling frequency, advanced digital signal processing technology, strong anti-interference performance, high accuracy of measurement results. 8. It adopts dustproof, waterproof and anticorrosive engineering plastic sealing box, which is small in volume, light in weight and easy to carry.
1. The vacuum filtering device has the advantages of mature technology convenient use and high efficiency. It contains a number of taps can realize a number of filtering process. The use of water circulation device to replace the oil circulation pump make it more convenient with low failure rate 2. The air blast drying device adopts German technology the air duct is advanced the fan noise is small the performance is stable; 3. Microcomputer High precision intelligent control. Once set the temperature it self judge the heating power and display heating state. 4. Adjustable air inlet for temperature control and gas emissions. 5. digital electronic balance has correction function self-checking function and multiple modes
Application: TKBLQ-I zinc oxide arrester tester is a special instrument used to test the electrical performance of arresters. The instrument is suitable for live or power failure detection of arresters of various voltage levels, so as to timely detect the internal insulation damp and valve aging and other dangerous defects. TKBLQ-I zinc oxide arrester test instrument is easy to operate and easy to use. The whole measuring process is controlled by microcomputer. It can measure the total current, resistive current and its harmonics, power frequency reference voltage and its harmonics, active power and phase difference. The real waveform of voltage and current can be displayed on the large screen. Features: 1. 5.7 "320 Ã?? 240 LCD, high-speed thermal printer; graphic display, intuitive interface, easy to operate and use. 2. It is applicable to live arrester, power failure or laboratory. 3. The current and voltage sensors are completely isolated, safe and reliable. A, B, C three-phase arrester can be stored as a group of test data. 4. The instrument can test continuously, display voltage current curve, and print data and curve quickly. 5. The internal configuration memory can store 200 groups of test data when power down. 6. With RS232 communication interface, the test data can be exported through the upper computer. 7. High speed sampling frequency, advanced digital signal processing technology, strong anti-interference performance, high accuracy of measurement results. 8. It adopts dustproof, waterproof and anticorrosive engineering plastic sealing box, which is small in volume, light in weight and easy to carry.
Application: TK-15 insulator distribution voltage tester is used to test string of voltage distribution of AC circuit 35-500kV insulator. Insulator distribution voltage test meter also can do all kinds of 35kV and AC voltage measurement in laboratory. It is an ideal testing meter for the safety of line operation and the auxiliary tools for live operation. Features: This insulator voltage distribution tester use the static structure converted the measured voltage into electric field to measure so the impedance is high. Small impact on tested system. The measured signal is amplified by the internal process and finally directly visualized voltage value by LCD. Operate quickly simple and clear.
1. Wide range of measuring voltage can test up to 1000G (Max 2000G) insulation resistance 2. Three and a half bit LCD digital display of insulation resistance value 3. automatically shift resistance measuring range 4. environment temperature can be measured 5. self-clocking function short buzz every 15 seconds 6. automatically calculate and save R15S R60S R600S DAR and Polarization Index 7. Output short-circuit current larger than 5mA (meet fast charging request to capacitive load) 8. strong anti-interference ability stable and reliable reading 9. perfect protection safe for operation 10. powered by rechargeable Li-battery auto power off when battery energy is not enough
TKBLQ-II zinc oxide arrester tester is a special instrument used to test the electrical performance of zinc oxide arrester. The instrument is suitable for live or power failure detection of zinc oxide arrester of various voltage levels so as to timely detect the internal insulation damp and valve aging and other dangerous defects. TKBLQ-II zinc oxide arrester tester is easy to operate and easy to use. The whole measuring process is controlled by single chip microcomputer. It can measure the total current resistive current and its harmonics power frequency reference voltage and its harmonics active power and phase difference. The instrument uses digital waveform analysis technology harmonic analysis and digital filtering software anti-interference methods to make the measurement results accurate and stable. 1. This machine adopts large screen LCD display all English menu operation easy to use. 2. High precision sampling and processing circuit and advanced Fourier harmonic analysis technology ensure more reliable data. 3. The instrument adopts high-speed magnetic isolation digital sensor to directly collect the input voltage and current signals which ensures the reliability and safety of the data. 4. Support wireless synchronous voltage sampling mode (type II). 5. The instrument can use electric field induction instead of PT secondary wiring (type I). 6. It has the functions of resistive current fundamental peak output and side phase correction. 7. The instrument is equipped with rechargeable battery calendar clock and micro printer which can store 120 sets of measurement data.
Product Introduction Underground cable fault locator is my company in order to cater to the advent of the era of power the power industry in the integration of many high-quality goods package the cable fault testing industry with the rapid development of the IT era as an opportunity the single chip microcomputer and laptop type of cable fault tester on the basis of embedded computer platforms to create suitable for cable fault testing industry characteristics of network cable fault testing service platform and systematic integration of the USB communication technology touch screen technology 3 g communications technology greatly improve the function of the use of the instrument and the use value and convenient site environment operation.Considering the increasing number of buried cables;The system satisfy the People's Republic of China power industry standard "DL/T849.1 ~ DL/T849.3-2004" electric power equipment dedicated testing equipment general technical conditions the system test by the host system multiple pulse generator the path of cable fault locator and instrument of four parts used in power cable fault test path the embedding depth of cable for airport and railway signal control cable and street lamp accurate test of cable fault. Thanks to the hard work of many engineers in the company the product has reached the international level especially since the whole set of devices has surpassed the world level in portability.The core technology of the multi-pulse method has changed the traditional testing method which has fundamentally solved the problem of high-resistance fault waveform reading that was difficult to solve previously. After multi-pulse generator any complex high-resistance waveform can be converted into a very familiar and easy to identify low-voltage pulse short-circuit fault waveform.It solves the problem that the user cannot recognize the complicated high resistance fault waveform for a long time and improves the level of the key rough measurement.
