(1) Double Acting Cylinder. (2) Exchangeable Hex Casset with one way ratcheting mechanism, to eliminate usage of heavy sockets. (3) 360 degree x 180 degree Swivel hose connection to reduce hose whip lashing & easy usage at restricted areas. (4) The inserts are with thin profile to use at limited space, where sockets can't be used. (5) Special high strength, ultra-light aircraft material for strength & light weight. (6) Reaction arm inbuilt with the inserts. (7) Working pressure of 700 bars. (8) Accuracy +-3%.
(1) Rigid Alloy Steel Body Construction for long life. (2) Double acting cylinder design. (3) Interchangeable Square drive to Hex Drive with Power Head. (4) Rigid Bolting System with power head & ratchet head. (5) Working Pressure 700 bar (10,000 psi). (6) Torque Precision +-3%.
(1) Rigid Alloy Steel Body Construction for long life. (2) Double acting cylinder design. (3) Exchangeable Hex drive Ratchet Mechanism. (4) Rigid Bolting System with power head & ratchet head. (5) Working Pressure 700 bar (10,000 psi). (6) Torque Precision +-3%. (7) Interchangeable Hex Drive to Square Drive with Power Head.
GRIPHOLD® make, Heavy Duty Single Ended Straight open type slugging wrench made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Swivel Impact Socket in 3/8 square drive made from Chrome vanadium Steel (EN 47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
-> APPLICATIONS: (1) Consistent torque accuracy in all international power supplies 100-253V / 45-66 Hz. Power max. 2000W, protection category. (2) Precise shut-off torque at operation with voltage-controlled portable generators. -> GRIPHOLD SPECIALS (1) Innovative motor protection with automatic switch-off to secure the bolting quality. (2) Smart processor-controlled switch-off electronics for consistently precise reproduction of the pre-selected torque. (3) Angle-drive with optimized efficiency and great running characteristics. (4) Extraordinarily robust motor housing of cast aluminium. (5) Repeat shut off accuracy +/-3% for the same bolting application. -> ADVANTAGES: (1) Maintenance-free, low-wear, brushless synchronous motor with excellent efficiency. (2) Simple 1-finger operation for quick, comfortable work. (3) The 360 degree rotating handle ensures comfortable operation and none of the reaction forces are transferred to the operator.
The Spinning Wrench conforms to API Spec. 7K. It is a pneumatically powered tool for spinning drill pipe from 3 1/2'' to 5 1/2'' OD. It can be adjusted whenever necessary. Using the proven principal of frictional drive contact, the spinning wrench can spin drill pipe in or out quickly and efficiently without damage to drill pipe and without the hazards of the dangerous spinning chain. Liuda Li Sales Manager e-mail liuda@lakepetro.com whatsapp 8613325040907 skype 1522095217@qq.com
(1) Non-length dependent design. (2) Alloy steel precision torsion drive. (3) Dual scale. (4) Dual direction. (5) Memory follower needle on each wrench. (6) Dial protected with steel guard. (7) Ranges from 0 in.lb. to 2000 ft.lb. (8) GRIPHOLD calibration certificate traceable to NPL supplied standard. (9) Serial number hard marked on each wrench. (10) 3% accuracy from 20-100% of range.
GRIPHOLD - heavy duty torque multipliers, are supplied with a support arm as a standard version. GRIPHOLD - heavy duty torque multipliers, provide safe, economic and problem-free operation. They replace impact wrenches, pipe extensions and other insufficient methods. They improve on-the-job safety and provide short assembly times.
ADVANTAGES: (1) Permanently higher joint quality as compared to impact and hydraulic wrenches by continuous rotation of the square drive. (2) GRIPHOLD GLD - the 360 degree rotating handle ensures comfortable operation and none of the reaction forces are transferred to the operator. (3) GRIPHOLD GLS2 with fast gear for turning in and simple, quick switching to power gear (is used for applying final torque). GRIPHOLD SPECIALS (1) Simple 1-finger operation for right/left rotation, optional facility to enable the reaction to be locked in one position. (2) Robust motor housing from cast aluminium with proven pneumatic drive. (3) Proven high-performance gears, produced in a chip-free high-precision process produce high loads with low wear. (4) GRIPHOLD GLS2 with uniquely high torque - 48,600 Nm. (5) On demand with optional silencer levels to reduce the noise from the motor exhaust.
A torque multiplier is a tool used to provide a mechanical advantage in applying torque to turn bolts, nuts or other items designed to be actuated by application of torque, such as the actuation of valves, particularly where there are relatively high torque requirements.
USED FOR SEALING PET & PP STRAPPING. WORKS ON AIR. WEIGHT APPROX 4-5 KG ONLY SIZE : 12MM TO 19MM OF WIDTH AND 0.7 MM TO 1 MM OF THICKNESS
USED FOR SEALING PET & PP STRAPPING. WORKS ON AIR. WEIGHT APPROX 4-5 KG ONLY SIZE : 19MM TO 25MM OF WIDTH AND 9.0 MM TO 1.27 MM OF THICKNESS
Fill and Circulate Tool (FAC Tool) is a surface tool used during the casing running operation. The FAC Tool is designed to both fill the casing with drilling fluid while running it in the hole and to enable quick circulation of the casing string at any time without installation of a casing swage. The FAC Tool has features with easy-to-use, safe and reliable, no leakage and so on, which lightens labor intensity of workers greatly and improves operation environment of well. FAC Tool is available for top drive. Joint is a standard 41/2IF drill pipe connector, but it may adapt top drive connector of other standard through changing joint (special connector shall be illustrated when ordering goods). The FACT Tool may come in two tool sizes, Large (L-FAC) and Medium (M-FAC) so as to adapt different pipe diameters, and different sizes may adapt pipe diameter at any size though changing seal assembly.
The Sucker Rod Wrenches are made heat-treated alloy steel, to quickly break the toughest sucker rod or coupling joint. The opening is applicable to square the shape of the steel-made sucker rod. The balances designed of wrench can reduce the fatigue of users, which is an outstanding tool for manual mounting and demounting the sucker rod.
Casing bushing is combined by bushing body and insert bowls. It is suitable for handling casing less than 30 in. There are two types: solid and split. CU and CUL are solid bushing, and CB is split bushing. These series of rotary bushing are suitable for API standard rotary slips, drill collar slips, casing slips,insert bowls and roller bushings, with two structures: solid body and split body. Two drive types are available: pin driven and square driven. It is designed and manufactured according to API Spec 7K Specification for Drilling Equipment.
Swivel Joints are used in flow line. These products are made from high strength alloy steel by forging and the heat treatment is carried out on it, thus its long service life and service strength are guaranteed under the rated working pressure. They are designed for the critical service conditions that exist in fracturing, cementing, acidizing and well testing. Both ends of the swivel joint can be connected by the LP inner thread connection and also can be connected by union so they could be installed in various kinds of pipelines.
TS-100 tubing /casing spiders are tools for handling drill collars, casings, tubings and slick pipes. Both the spider body and slips are made of high-quality alloy steel and heat-treated especially. The spiders are not so weighty and easy to operate. They are designed and manufactured according to API Spec 7K specification for drilling and well servicing equipment. The API spider same API Split master bushing with a diameter of 4in/ft on the diameter taper. The spider is made of high -quality alloy steel and heat-treated especially. The Spider are easy to operate.
Hammer Unions are designed as heavy duty, high pressure flow line connectors, which is commonly applied to chemical plants, on marine dredging vessels, in strip mines and in the oil industry. The color coding system on Hammer Unions represent the different configurations and pressure ratings.
Rail deburring tools manufactured by Harbin Guiyou Technology Development Co., Ltd. feature the following characteristics: 1. The blade adopting special high temperature resistant wear materials to ensure long product service life. 2. Repeated heat treatment during production to prevent deformation. 3. Reasonable design, easy installation and removal to ensure the smooth and flat surface of the rail with even margins after deburring.
