Standard ASTM B348 / ASME SB348 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standard ASTM B348 / ASME SB348 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Description Titanium block/ingot/billet Material Gr1 Gr2 Gr3 Gr4 Gr5 Gr6 Gr7 Gr9 Gr11 Gr12 Gr23 Ti15333 BT1-00 BT1-0 BT1-2 Standard ASTM B381,ASTM F67,ASTW F136 Size customed MOQ 1kg Property high strength fine corrosion resistance low density and low weight Tehnique Forging ,Machining Application 1. Low Density and High Specification Strength 2. Excellent Corrosion Resistance 3. Good Resistance to Effect of Heat 4. Excellent Bearing to Cryogenics Property 5. Nonmagnetic and Non-toxic 6. Good Thermal Properties 7. Low Modulus of Elasticity
Titanium alloy wire, titanium bars, titanium rod.
Product Introduction Pure Titanium Electrode Porous Fiber Felts, also known as ti felts or ti fiber felts, are commonly used in electrolyzer stacks as the diffusion layer or flow field material on the oxygen (anode) side. Unlike carbon-based gas diffusion layers that cannot be used at the oxygen evolution electrode due to immediate oxidation, titanium fiber felt is an ideal diffusion medium that provides electrical contact between the anode catalyst layer and bipolar plate or current collector component. Its unique properties, including high porosity and uniform pore size distribution, enable efficient gas transport and water management within the cell, enhancing the overall efficiency of the electrolysis process. Overall, the use of titanium fiber felt in electrolyzer stacks improves their durability, reliability, and efficiency in hydrogen production. Parameter Material: pure titanium fiber Max Size: 1000x1000mm Other Size: 200x200mm, 205x205mm, 300x300mm, 305x305mm or customized Porosity: 60%-80% Thickness: 0.25-2mm Features 1. Uniform pore size distribution: Titanium fiber felt´s consistent pore size distribution ensures efficient filtration and separation processes, providing reliable filtration performance. 2. Strong corrosion resistance: Titanium fiber felt´s exceptional corrosion resistance makes it suitable for harsh environments and ensures reliable performance in applications requiring durability and longevity. 3. Good water permeability: Titanium fiber felt´s good water permeability makes it useful for water filtration and wastewater treatment applications, providing clean and safe water for various applications. 4. High porosity: Titanium fiber felt´s high porosity enables high gas and liquid flow rates, allowing for efficient heat transfer and suitable for thermal management applications. 5. Good heat dissipation: Titanium fiber felts excellent heat dissipation properties make it ideal for high-temperature environments, ensuring stable performance and long-term durability.
Product Introduction Sintered titanium plate is a kind of titanium product, which is widely used in various industries such as chemical industry, medical treatment and food processing due to its excellent corrosion resistance and high strength. The porous titanium plate produced using the sintering process is to press the titanium powder into the desired shape and then sinter at high temperature. Titanium powder particles link together during sintering to form a solid structure with interconnecting pores of specified size and shape. The sintered titanium plates produced have a high strength-to-weight ratio and are resistant to high temperatures and harsh chemical conditions. Sintered titanium plates can be tailored to suit customer needs, such as pore size, pore dispersion, and thickness. To meet a wide range of applications, we can also manufacture porous titanium plates with complex geometries such as cylindrical, conical, and flat shapes. To ensure product quality, we conduct strict tests on porous titanium plates, including pore size distribution analysis, compressive strength test and corrosion resistance test. Product parameters Filtration grade: 0.2-100um Thickness: above 1mm Shape: square, round, shaped Size: 300 800mm can be customized Pressure: 0.2Mpa Features 1. High strength and toughness: During the sintering process, the titanium powder particles are closely combined with each other, so that the sintered titanium plate has high strength and toughness, and can withstand certain impact and pressure. 2. Excellent corrosion resistance: Titanium itself has good corrosion resistance, and a uniform microporous structure can be formed through sintering, which further improves the corrosion resistance of titanium plates. 3. Can be made into complex shapes: through the sintering process, titanium sheets of various complex shapes and pore diameters can be made to meet the needs of different industries and applications. 4. Adjustable pore size and porosity: By adjusting the sintering process parameters, the pore size and porosity of the titanium sheet can be controlled to obtain the performance required for different applications such as filtration, separation, and adsorption. How to purchase porous sintered titanium plate A. Materials to be delivered; B. Corrosion problems; C. Special operating conditions involving pressure, temperature, etc.; D. Pollutants encountered; E. Required shape, dimensions and tolerances; F. Required flow and pressure allowed by the filter unit.
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.
OD: 5-600mm/0.2-24; Length:100mm-6000meter. Grade 1, 2, 5, 7 and 23 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
SML tube OD:3-114mm / 0.12-4.5; Wall thickness:0.2-9mm; Welded tube: OD:4-914mm/0.16-36; Wall thickness:0.4-30mm; Length: 100-6000mm Grade: GR1,GR2,GR7,GR9,GR5,GR12. Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
OD:0.5-4.9mm/0.02-0.2; Length:500-1500 mm Grade: ERTi-2,ERTi-5,ERTi-7,ERTi-9 Surface:Pickling,Polished Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 5 - 10 Kg
OD:20-114mm/0.78-4.5 Wall thickness:1.65-4mm; Length:500-3000mm. Grade:Gr1,GR2,GR5,GR9,GR7,GR12 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 100 Kg
Description : High Quality titanium round bar Standard : ASTM AISI SUS SS EN DIN JIS Specification: Diameter: 3mm-400mm Length: 3m, 4m, 5.8m, 6m, 11.8m or other length as requirement Type:Round bar Characteristic: Stainless steel bar is lower percent of C and Mo,which is excellent corrosion ,resistance in Ocean and Chemical Industry Surface Treatment : Bright ,Polishing ,Peeled,Bright or as your requirement Application : Stainless Steel Round Bar is mianly used in 1:Electric power,petroleum,boiler, high temperature resistant, low temperature resistant,corrosion resistant 2:Tableware, cabinet, cutting tool, boiler, auto part 3:Medical instruments, building materials, food industry 4:Sea,chemical industry and Machine Manufacture
Titanium exhaust tubing is characterized by its lightweight, high strength, corrosion resistance and heat resistance. The density of titanium alloy is only 60% of steel, but the strength is even better. At the same strength, the titanium exhaust tubing is lighter than stainless steel, suitable for race cars and motorcycles owners who pursue the ultimate lightweight modification. Titanium Seamless Tube is a long strip of tubing made of titanium alloy with a hollow section and no seams around it. It was originally used primarily for the manufacture of aircraft engine compressor components and structural components for rockets, missiles and high-speed aircraft. Since the mid-1960s, it has been gradually applied to electrodes in the electrolysis industry, condensers in power stations, heaters for oil refining and seawater desalination, and environmental pollution control devices. The titanium welding pipe is obtained by welding a titanium or titanium alloy coiled strip or a wide-width sheet into a tubular shape by crimping. It has been widely used in electric power, seawater desalination, water treatment equipment, air conditioning equipment and other industries, but in the petrochemical industry, the use of titanium welded pipes is still being promoted.
FS Titanium is the professional and leading manufacturer of high-quality all kinds of titanium and titanium alloy products in China. Commodity: Lamborghini Titanium Lug bolts, Lamborghini Titanium Wheel Bolts Material: GR5 Titanium, Ti-6Al-4V Color: Natural, Hand Burnt Blue, PVD Black Application: Lamborghini Gallardo Size: M14x1.5, Cone ( Tapered ) Seat Thread Length: Accept customized size Weight: 70g Delivery via DHL/FedEx IP, fast shipping Perfect for replacing rusted and/or broken lug bolts Our Titanium wheel lug bolts are great for showing off your wheels and enhancing the overall look of your vehicle. titanium wheel lug bolt, ti6al4v,lamborghini lug bolts, titanium bolts, lamborghini Gallardo wheel, T80 bolts, T70 bolts, racing bolts, lug nuts, wheel nuts
FS Titanium is the professional and leading manufacturer of high-quality all kinds of titanium and titanium alloy products in China. Commodity: Lamborghini Titanium Lug bolts, Lamborghini Titanium Wheel Bolts Material: GR5 Titanium, Ti-6Al-4V Color: Natural, Hand Burnt Blue, PVD Black Application: Lamborghini Gallardo Size: M14x1.5, Cone ( Tapered ) Seat Thread Length: Accept customized size Weight: 70g Delivery via DHL/FedEx IP, fast shipping Perfect for replacing rusted and/or broken lug bolts Our Titanium wheel lug bolts are great for showing off your wheels and enhancing the overall look of your vehicle. titanium wheel lug bolt, ti6al4v,lamborghini lug bolts, titanium bolts, lamborghini Gallardo wheel, T80 bolts, T70 bolts, racing bolts, lug nuts, wheel nuts
Titanium Products Such as The Titanium Ingots, Slabs, Bars, Plates, Pipes, Forgings Fittings Wire Power, Standards Parts, Non-Standard Equipment and Other Corrosion Resistant Metals, 2.Steel Products Such as The Steel Bars, Plates, Pipes, 3.Top Entry Ball Valves ,Cryogrnic Globe Valves, Globe Valves Bolted Bonnet, Through Conduit Gate Valves Fabricated,Through Conduit Gate Valves Slab and Expanding API 6A-2000,3000,5000,10000&15000 PSI,Trim Expnation for Vitas gte valves,Materials for Vitas gate Valves,Dual plate Single Plate&Tilting Disc, Swing Check Valves full Opening,Swing check Valves Pressure seal,
Titanium sheets and plates at stock for heat exchanger , tanks, corrosion resistance equipment and so on.
Titanium forgings in shape for billets,bars, discs,square bars, rings, valve bodies, flanges . With material grade 1, gr.2,gr.3,gr.4,gr.5,gr.7,gr.9,gr.12 and so on. yswtitanium at aliyun dot com
1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. 2. Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3. Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalysts in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions. 4.Precautions for the use of titanium sintered porous materials: During installation, disassembly and clean avoid scratches, collisions and falls on hard objects. When using, the filtrate is filtered from the outside in to avoid the reverse direction. Avoid instant pressurization when the filter element works. When the filtration efficiency is less than 50%, the filter element should be cleaned in time. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times. If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.
Specification: 1.Standard:ASTMF2063-12 2.Sheet size: Thickness 0.1-10.0mm Width 500mm Length 1000mm 3.Surface: Acid cleaning/ polished 4.AF range:-20-100 Degree 5.Density:6.45g/cc 6.Feature: superelastic/ shape memory 7.Application:medical 8.Width:300mm 9.Length:as required Place of origin: China Payment term: T/T,L/C etc. Lead time: 15-30days Port of shipment:Xiamen,China
